«Установка и настройка OpenVPN на Debian 8» и «Почтовый сервер на Debian 9 полная установка: dbmail & postgresql & postfix & stunnel & postgrey& spamassassin»: разница между страницами

Материал из support.qbpro.ru
(Различия между страницами)
imported>Supportadmin
 
imported>Vix
 
Строка 1: Строка 1:
===Генерация сертификатов===
'''Руководство для быстрого развертывания собственного сервера почты.'''<br>
* ''Данная статья появилась тут в связи с тем, что я столкнулся с проблемой переноса почтового сервера на обычной файловой системе.''
''В первую очередь с тем, что почта была организована на уже устаревшем ПО и перенос ее на новую платформу без потерь стал практически не возможен.
А вот хранение почты в базе данных, дает огромные преимущества при обновлении или доступе к информации, а так же восстановлении. В частности у меня база данных находится на другом хосте, что сильно облегчает ее обслуживание, при этом все конфигурационные файлы самой почты можно легко повторить если понадобится на новом хосте для создания почтового сервера заново.''<br>


'''Генерация сертификатов как [http://support.qbpro.ru/index.php?title=Debian_squeeze_open-vpn здесь].'''
=='''1. Порядок установки dbmail'''==
===Подключить репозитории OpenVPN===
* '''''Система Debian Stretch {9}'''''
'''Подключить [https://community.openvpn.net/openvpn/wiki/OpenvpnSoftwareRepos репозиторий] и у меня подключены бэк-порты.'''
* Используемый source.list
#
deb http://mirror.mephi.ru/debian/ stretch main
deb-src http://mirror.mephi.ru/debian/ stretch main
deb http://security.debian.org/debian-security stretch/updates main
deb-src http://security.debian.org/debian-security stretch/updates main
# stretch-updates, previously known as 'volatile'
deb http://mirror.mephi.ru/debian/ stretch-updates main
deb-src http://mirror.mephi.ru/debian/ stretch-updates main
###### Debian Main Repos
deb http://deb.debian.org/debian/ stable main contrib non-free
deb-src http://deb.debian.org/debian/ stable main contrib non-free
deb http://deb.debian.org/debian/ stable-updates main contrib non-free
deb-src http://deb.debian.org/debian/ stable-updates main contrib non-free
deb http://deb.debian.org/debian-security stable/updates main contrib non-free
deb-src http://deb.debian.org/debian-security stable/updates main contrib non-free
deb http://ftp.debian.org/debian stretch-backports main contrib non-free
deb-src http://ftp.debian.org/debian stretch-backports main contrib non-free
1.1 ''Устанавливаем необходимые пакеты:''
apt-get install pkg-config libglib2.0-dev libgmime-2.6-dev libmhash-dev libevent-dev libssl-dev libzdb-dev\
autoconf automake libtool autotools-dev dpkg-dev fakeroot debhelper dh-make libldap2-dev libsieve2-dev ascidoc\
libcrypto++6 libcrypto++-utils libcrypto++-dev xmlto xmltoman libarchive-tools lrzip binutils-multiarch\
arch-test libpgf-dev libsasl2-modules-db libsasl2-modules curl libcroco3 libsasl2-2 procmail libsasl2-modules-sql\
libpcre32-3 zlib1g-dev libmhash-dev libpcrecpp0v5


''На всякий случай продублирую''
1.2 ''Скачиваем с [http://www.dbmail.org/index.php?page=download dbmail.org] исходники:''
wget -c -t 0 -T 8 http://www.dbmail.org/download/3.1/dbmail-3.1.17.tar.gz


  <nowiki>
1.3 ''Распаковываем и компилируем:''
Using OpenVPN apt repositories
  cp dbmail-3.1.17.tar.gz /usr/local/src
We maintain several OpenVPN (OSS) software repositories. To setup the repositories you need to change to the root user. Typically this is done using sudo:
tar -xf dbmail-3.1.17.tar.gz /usr/local/src.dbmail-3.1.7
cp dbmail-3.1.17.tar.gz /usr/local/src/dbmail_3.1.7.orig.tar.gz
* '''[!]''' - ''не знаю, может так у меня получилось, но когда применяешь комменты, версия которая высвечивается именно'' '''3.1.7'''!!
* '''[!]''' - ''именно поэтому все, что тут распаковываем и создаем имеет версию'' - 3.1.7 ...


$ sudo -s
''Готовим пакет к сборке:''
Then import the public GPG key that is used to sign the packages:
cd /usr/local/src/dbmail-3.1.7
./configure --prefix=/usr
 
dpkg-source --commit
даем имя, что-то: '''pgsql.commit'''<br>
выходим по '''ESC'''<br>
должно быть так:<br>
...
dpkg-source: инфо: локальные изменения были записаны в новую заплату: dbmail-3.1.7/debian/patches/pgsql.commit


$ wget -O - https://swupdate.openvpn.net/repos/repo-public.gpg|apt-key add -
далее:
Next you need to create a sources.list fragment (as root) so that apt can find the new OpenVPN packages. One way to do it is this:
cd /usr/local/src/
dpkg-source -b dbmail-3.1.7


$ echo "deb http://build.openvpn.net/debian/openvpn/<version> <osrelease> main" > /etc/apt/sources.list.d/openvpn-aptrepo.list
cd /usr/local/src/dbmail-3.1.7
Where <version> can be one of
dpkg-buildpackage -d


stable: stable releases only - no alphas, betas or RCs
* '''[!]''' - если у вас появилось сообщение типа:
testing: latest releases, including alphas/betas/RCs
...
release/2.3: OpenvPN 2.3 releases
debian/rules:138: *** missing separator (did you mean TAB instead of 8 spaces?). Останов.
release/2.4: OpenVPN 2.4 releases, including alphas/betas/RCs
dpkg-buildpackage: ошибка: debian/rules clean возвратил код ошибки 2
and <osrelease> depends your distribution:


wheezy (Debian 7.x)
* '''[!]''' - то необходимо исправить ошибку в файле '''dbmail-3.1.7/debian/rules'''
jessie (Debian 8.x)
строка 138:
precise (Ubuntu 12.04)
'''''........make -f debian/rules binary-common $* DH_OPTIONS=-p$*'''''
trusty (Ubuntu 14.04)
      ^^^
xenial (Ubuntu 16.04)
    здесь 8 пробелов!! - а должно быть 2 табуляции, что и вызывает ошибку...
Examples:


$ echo "deb http://build.openvpn.net/debian/openvpn/testing jessie main" > /etc/apt/sources.list.d/openvpn-aptrepo.list
* после того как соберется пакет, дожно быть так:
$ echo "deb http://build.openvpn.net/debian/openvpn/release/2.3 wheezy main" > /etc/apt/sources.list.d/openvpn-aptrepo.list
# ls -n /usr/local/src
Now you're set for installing OpenVPN. Note that packages built for older operating system releases might work just fine on newer release of the same operating system.
итого 3668
drwxrwxr-x 13 0  0    4096 ноя  2 00:19 dbmail-3.1.7
-rw-r--r--  1 0 50    7597 ноя  2 00:19 dbmail_3.1.7-1_amd64.buildinfo
-rw-r--r--  1 0 50    1957 ноя  2 00:19 dbmail_3.1.7-1_amd64.changes
-rw-r--r--  1 0 50  349256 ноя  2 00:19 dbmail_3.1.7-1_amd64.deb
-rw-r--r--  1 0 50  148008 ноя  2 00:14 dbmail_3.1.7-1.debian.tar.xz
-rw-r--r--  1 0 50    1045 ноя  2 00:14 dbmail_3.1.7-1.dsc
-rw-r--r-- 1 0  0 2391054 июл 27  2014 dbmail_3.1.7.orig.tar.gz
-rw-r--r--  1 0 50  838508 ноя  2 00:19 dbmail-dbgsym_3.1.7-1_amd64.deb


Installing OpenVPN
* копируем себе в архив и ставим пакет.
On Debian/Ubuntu use
dpkg -i dbmail_3.1.7-1_amd64.deb


$ apt-get update && apt-get install openvpn</nowiki>
* правим файл конфигурации:
editor /etc/dbmail/dbmail.conf


'''Обновить libssl, возможно не критично, но это ssl :D'''
* пример рабочего конфигурационного файла:
===Конфигурации сервера и клиента для двух интерфейсов tun и tap одновлеменно===
В Debian 8 существует особенность запуска двух и более конфигураций openvpn. Эта особенность в "любимом" systemd. При установке активируется '''openvpn@server.service'''. И '''''запускается только один конфигурационный файл и только с именем server.conf''''' (3 часа мозг ломали). Исправляется это деактивацией openvpn@server.service. Затем в каталоге /lib/systemd/system сделать копии файла openvpn@server.service и назвать их по именам конфигурационных файлов. В моём случае файлы конфигураций называются server_tap.conf и server_tun.conf по задействованным интерфейсам. Затем их активировать


  <nowiki>systemctl enable openvpn@server_tap.service  
  # (c) 2000-2006 IC&S, The Netherlands
systemctl enable openvpn@server_tun.service</nowiki>
#
# Configuration file for DBMAIL
[DBMAIL]
#
# Database settings
#
# database connection URI
'''#dburi                = sqlite:///var/tmp/dbmail.db'''
#
# Supported drivers are sql, ldap.
#
'''authdriver          = sql'''
#
#
# following fields are now DEPRECATED!
'''driver              = postgresql'''
'''host                = 10.0.5.2'''
'''sqlport              = 5432'''
'''#sqlsocket            ='''             
'''user                = dbmail'''
'''pass                = dbmailpass'''
'''db                  = mailbasename'''
#
# Number of database connections per threaded daemon
# This also determines the size of the worker threadpool
#
# Do NOT increase this without proper consideration. A
# very large database/worker pool will not only increase
# the connection pressure on the database, but will more
# significantly cause unnecessary context-switching in
# your CPUs.
#
#max_db_connections  = 10
#
# Table prefix. Defaults to "dbmail_" if not specified.
#
'''table_prefix        = dbmail_''' 
#
# encoding must match the database/table encoding.
# i.e. latin1, utf8
encoding            = utf8
#
# messages with unknown encoding will be assumed to have
# default_msg_encoding
# i.e. iso8859-1, utf8
default_msg_encoding = utf8
#
# Postmaster's email address for use in bounce messages.
#
#postmaster          = DBMAIL-MAILER     
#
# Sendmail executable for forwards, replies, notifies, vacations.
# You may use pipes (|) in this command, for example:
# dos2unix|/usr/sbin/sendmail  works well with Qmail.
# You may use quotes (") for executables with unusual names.
#
sendmail              = /usr/sbin/sendmail   
#
#
# The following items can be overridden in the service-specific sections.
#
#
#
# Logging via stderr/log file and syslog
#
# Logging is broken up into 8 logging levels and each level can be indivually turned on or off.
# The Stderr/log file logs all entries to stderr or the log file.
# Syslog logging uses the facility mail and the logging level of the event for logging.
# Syslog can then be configured to log data according to the levels.
#
# Set the log level to the sum of the values next to the levels you want to record.
#  1 = Emergency
#  2 = Alert
#  4 = Critical
#  8 = Error
#  16 = Warning
#  32 = Notice
#  64 = Info
# 128 = Debug
# 256 = Database -> Logs at debug level
#
# Examples:  0 = Nothing
#            31 = Emergency + Alert + Critical + Error + Warning
#          511 = Everything
#
file_logging_levels      = 7
#
syslog_logging_levels    = 31
#
# Generate a log entry for database queries for the log level at number of seconds of query execution time.
#
query_time_info      = 10
query_time_notice    = 20
query_time_warning    = 30
#
# Throw an exception is the query takes longer than query_timeout seconds
query_timeout        = 300
#
# Root privs are used to open a port, then privs
# are dropped down to the user/group specified here.
#
'''effective_user        = dbmail'''
'''effective_group      = mail'''
#
# The IPv4 and/or IPv6 addresses the services will bind to.
# Use * for all local interfaces.
# Use 127.0.0.1 for localhost only.
# Separate multiple entries with spaces ( ) or commas (,).
#
'''bindip                = 0.0.0.0        # IPv4 only - all IP's'''
#bindip                = ::            # IPv4 and IPv6 - all IP's (linux)
#bindip                = ::            # IPv6 only - all IP's (BSD)
#bindip                = 0.0.0.0,::    # IPv4 and IPv6 - all IP's (BSD)
#
# The maximum length of the queue of pending connections. See
# listen(2) for more information
#
# backlog              = 128
#
# Idle time allowed before a connection is shut off.
#
timeout              = 300           
#
# Idle time allowed before a connection is shut off if you have not logged in yet.
#
login_timeout        = 60
#
# If yes, resolves IP addresses to DNS names when logging.
#
resolve_ip            = yes
#
# If yes, keep statistics in the authlog table for connecting users
#
authlog              = no
#
# logfile for stdout messages
#
logfile              = /var/log/dbmail.log       
#
# logfile for stderr messages
#
errorlog              = /var/log/dbmail.err       
#
# directory for storing PID files
#
pid_directory        = /var/run/dbmail
#
# directory for locating libraries (normally has a sane default compiled-in)
#
library_directory      = /usr/lib/dbmail
#
# SSL/TLS certificates
#
# A file containing a list of CAs in PEM format
tls_cafile            =
# A file containing a PEM format certificate
tls_cert              =
# A file containing a PEM format RSA or DSA key
tls_key              =
# A cipher list string in the format given in ciphers(1)
tls_ciphers          =
# hashing algorithm. You can select your favorite hash type
# for generating unique ids for message parts.
#
# for valid values check mhash(3) but minus the MHASH_ prefix.
# if you ever change this value run 'dbmail-util --rehash' to
# update the hash for all mimeparts.
#
# examples: MD5, SHA1, SHA256, SHA512, TIGER, WHIRLPOOL
#
# hash_algorithm = SHA1
# header_cache tuning
#
# set header_cache_readonly to 'yes' to prevent new
# unknown header-names from being cached.
#
# header_cache_readonly = yes
[LMTP]
'''bindip = 127.0.0.1'''
port                  = 24               
#tls_port              =
[POP]
port                  = 110
#tls_port              = 995
# You can set an alternate banner to display when connecting to the service
# banner = DBMAIL pop3 server ready to rock
#
# If yes, allows SMTP access from the host IP connecting by POP3.
# This requires addition configuration of your MTA
#
pop_before_smtp      = no     
[HTTP]
port                  = 41380
#
# the httpd daemon provides full access to all users, mailboxes
# and messages. Be very careful with this one!
'''bindip                = 127.0.0.1'''
admin                = admin:secret
[IMAP]
# You can set an alternate banner to display when connecting to the service
# banner = imap 4r1 server (dbmail 2.3.x)
#
# Port to bind to.
#
port                  = 143               
##tls_port              = 993
#
# IMAP prefers a longer timeout than other services.
#
timeout              = 4000           
#
# If yes, allows SMTP access from the host IP connecting by IMAP.
# This requires addition configuration of your MTA
#
imap_before_smtp      = no
#
# during IDLE, how many seconds between checking the mailbox
# status (default: 30)
#
# idle_timeout          = 30
# during IDLE, how often should the server send an '* OK' still
# here message (default: 10)
#
# the time between such a message is idle_timeout * idle_interval
# seconds
#
# idle_interval        = 10
#
# If TLS is enabled, login before starttls is normally
# not allowed. Use login_disabled=no to change this
#
# login_disabled        = yes
#
# Provide a CAPABILITY to override the default
#
# capability  = IMAP4 IMAP4rev1 AUTH=LOGIN ACL RIGHTS=texk NAMESPACE CHILDREN SORT QUOTA THREAD=ORDEREDSUBJECT UNSELECT IDLE
# max message size. You can specify the maximum message size
# accepted by the IMAP daemon during APPEND commands.
#
# Supported formats:
#  decimal: 1000000   
#  octal:  03777777
#  hex:    0xfffff
#
# max_message_size      =
[SIEVE]
#
# Port to bind to.
#
port                  = 2000             
tls_port              =
[LDAP]
port                  = 389
version              = 3
hostname              = ldap
base_dn              = ou=People,dc=mydomain,dc=com
#
# If your LDAP library supports ldap_initialize(), then you can use the
# alternative LDAP server DSN like following.
#
# URI                = ldap://127.0.0.1:389
# URI                = ldapi://%2fvar%2frun%2fopenldap%2fldapi/
#
# Leave blank for anonymous bind.
# example: cn=admin,dc=mydomain,dc=com   
#
bind_dn              =
#
# Leave blank for anonymous bind.
#
bind_pw              =
scope                = SubTree
# AD users may want to set this to 'no' to disable
# ldap referrals if you are seeing 'Operations errors'
# in your logs
#
referrals            = yes
user_objectclass      = top,account,dbmailUser
forw_objectclass      = top,account,dbmailForwardingAddress
cn_string            = uid
field_passwd          = userPassword
field_uid            = uid
field_nid            = uidNumber
min_nid              = 10000
max_nid              = 15000
field_cid            = gidNumber
min_cid              = 10000
max_cid              = 15000
# a comma-separated list of attributes to match when searching
# for users or forwards that match a delivery address. A match
# on any of them is a hit.
field_mail            = mail
# field that holds the mail-quota size for a user.
field_quota          = mailQuota
# field that holds the forwarding address.
field_fwdtarget      = mailForwardingAddress
# override the query string used to search for users
# or forwards with a delivery address.
# query_string          = (mail=%s)
[DELIVERY]
#
# Run Sieve scripts as messages are delivered.
#
SIEVE                = yes             
#
# Use 'user+mailbox@domain' format to deliver to a mailbox.
#
SUBADDRESS            = yes         
#
# Turn on/off the Sieve Vacation extension.
#
SIEVE_VACATION        = yes     
#
# Turn on/off the Sieve Notify extension
#
SIEVE_NOTIFY          = yes
#
# Turn on/off additional Sieve debugging.
#
SIEVE_DEBUG          = no         
# Use the auto_notify table to send email notifications.
#
AUTO_NOTIFY          = no
 
#
# Use the auto_reply table to send away messages.
#
AUTO_REPLY            = no
#
# Defaults to "NEW MAIL NOTIFICATION"
#
#AUTO_NOTIFY_SUBJECT        =   
#
# Defaults to POSTMASTER from the DBMAIL section.
#
#AUTO_NOTIFY_SENDER        = 
# If you set this to 'yes' dbmail will check for duplicate
# messages in the relevant mailbox during delivery using
# the Message-ID header
#
suppress_duplicates    = no
#
# Soft or hard bounce on over-quota delivery
#
quota_failure          = hard
# end of configuration file


Это позволит управлять (start, stop, restart) интерфейсами по отдельность
* правим default конфигурационный файл - /etc/default/dbmail


Разница в интерфейсах:
# debian specific configuration for dbmail
*tun выдает 4-х адресную сеть (/30) и по dhcp и настройках клиента тоже это учитывается, tap одна большая сеть
*tun позволяет маршрутизацию
# work-around for linux/epoll bug in libevent
*для tun используется параметр server, для tap - ifconfig
export EVENT_NOEPOLL=yes
*tun - L3 интерфейс, tap - L2 интерфейс
* и много чего [https://openvpn.net/index.php/open-source/documentation/howto.html#policy], [https://sergeysl.ru/freebsd-openvpn-client-static-ip/,http://plangc.mybb.ru/viewtopic.php?id=83]
# comment out to disable the pop3 server
'''START_POP3D=true'''
# comment out to disable the imapd server
'''START_IMAPD=true'''
# uncomment to enable the lmtpd server
'''START_LMTPD=true'''
# uncomment to enable the timsieved server
#START_SIEVE=true
# comment out to enable the stunnel SSL wrapper
'''START_SSL=true'''
# specify the filename for the pem file as
# it resides in /etc/ssl/certs
'''PEMFILE="/etc/ssl/serts/dbmail.pem"'''


* создаем сертификат для dbmail:
cd /etc/ssl/certs
openssl req -new -x509 -nodes -out dbmail.pem -keyout smtpd.pem -days 3650
* перезапуск службы:
systemctl restart dbmail


'''ВНИМАНИЕ!!! Копия dh2048.pem с сервера или какая там у вас будет глубина шифрования на клиенте НЕ НУЖНА.'''
* Краткое пояснение:
1. Предназначенные для доставки сообщений от MTA в хранилище.<br>
2. Предназначенные для доставки MUA из хранилища.<br>


* К первым относятся:<br>
'''dbmail-lmtpd''' – UNIX-демон, принимающий клиентские подключения через UNIX-сокет или TCP-сокет. Для приема почтовых сообщений используется протокол LMTP. На каждое входящее сообщение MTA создает только клиентский сокет, необходимое количество процессов и подключений к БД создается заранее.<br>
Таким образом, этот вариант обеспечивает лучшую производительность при высокой нагрузке, но при низкой он потребляет больше системных ресурсов, чем необходимо.<br>


На клиент положить только сертификат клиента и конфиг. Сертификат может быть с паролем, может быть без. Как сделаете (смотри картинки по генерации сертификатов внимательно). На клиенте тоже обновить версию openvpn до серверной (может и не надо но в 2.4.0 есть lz4 сжатие и работать будет только на 2.4.0 клиенте).  
* Ко вторым относятся:<br>
'''dbmail-pop3d''' – демон для доступа по протоколу POP3.<br>
'''dbmail-imapd''' – демон для доступа по протоколу IMAP.<br>


Для выдачи клиентам фиксированных постоянных ip, на сервере в каталогах /etc/openvpn/ccd или /etc/openvpn/ddc нужно создавать файлики по одному на клиента.
* Кроме того, в состав DBMail входят следующие вспомогательные утилиты:<br>
Имя файла должно совпадать с именем сертификата (при генерации (common name) или можно посмотреть в логах)
'''dbmail-users''' – инструмент для управления пользователями и их псевдонимами (возможно, многим из вас будет привычнее термин alias).<br>
'''dbmail-util''' – инструмент для очистки, оптимизации и проверки корректности БД.<br>


<nowiki>
* С установкой '''dbmail''' пока окончено, следующий этап установка '''postgesql''' и настройка для будущей работы.
/etc/openvpn/ccd/lopic.crt для tap интерфейса


ifconfig-push 10.8.0.13 255.255.255.0
push "route 10.7.0.0 255.255.255.0 10.8.0.1"
</nowiki>


=='''2. [[Настройка PostgreSQL]]'''==


<nowiki>
2.1. После того как мы настроили базу данных '''postgresql''', создаем пользователя '''dbmail''' и базу '''dbmail'''<br>
/etc/openvpn/ddc/lopic.crt для tun интерфейса
* Создаем пользователя для работы с почтовой базой
createuser -U postgres -P dbmail


ifconfig-push 10.7.0.10 10.7.0.9
* '''[!]''' - Ни в коем случае не используйте спецсимволы в пароле, кроме #! (авторизация может не проходить)
push "route 10.8.0.0 255.255.255.0 10.7.0.9"
</nowiki>


Обратите внимание, что формат параметров в команде ifconfig-push для разных интерфейсов разный. Для tap - ip и маска сети. Шлюз по умолчанию первый ip в подсети. Для tun интерфейса ip клиента и ip шлюза для 30-й подсети (как задействовать еще два адреса из 4-х адресной сетки пока не ясно)
* Создаем базу
createdb -U postgres --owner dbmail dbmail


====/etc/openvpn/server_tap.conf====
* Вместе с '''dbmail''' идут заготовки базы, распаковываем и заливаем:
bunzip2 /usr/share/doc/dbmail-2.2.10/create_tables.pgsql.bz2
psql -U dbmail -d dbmail < /usr/share/doc/dbmail-2.2.10/create_tables.pgsql


  <nowiki>
или так:
#указывает программе работать в режиме сервера
  zcat /usr/share/doc/dbmail/examples/create_tables.pgsql.gz|psql -h 127.0.0.1 dbmail dbmailadmin
mode server


#активирует работу Transport Layer Security (криптографический протокол) сервера
или так:
tls-server
psql -U dbmail -h localhost maildb < create_tables.pgsql


#программа будет работать в режиме демона, если нет в этом необходимости - просто раскомментируйте строку
daemon


#локальный ip или имя хоста, на котором будет работать OpenVPN. Актуально, если на локальной машине несколько адресов.
* В этом дампе нет таблицы для работы с виртуальными доменами, создадим ее:
local 192.168.0.226
  CREATE TYPE dtype AS ENUM (
  'LOCAL',
  'VIRTUAL',
  'RELAY'
);
ALTER TYPE public.dtype OWNER TO dbmail;
SET default_with_oids = true;
CREATE TABLE dbmail_domains (
  uid integer NOT NULL,
  domain character varying(128) NOT NULL,  
  type dtype NOT NULL
);
INSERT INTO dbmail_domains (uid, domain, type) VALUES (1, 'example.com', 'LOCAL');


#указываем порт, по которому будет работать OpenVPN (обязательно поменять с 1194!!!)
'''База готова.'''
port 1194


#выбираем протокол TCP (если необходим UDP, тогда: proto udp)
* добавляем обработку базы в /etc/crontab
proto tcp-server
...
0 3 * * * root /usr/sbin/dbmail-util -cturpd -l 24h -qq
...


#используемый тип интерфейса - L2 туннель (для L3-туннеля: dev tun)
* проверяем работу '''dbmail''' c базой:
dev tap


#указываем файл с ключем сервера
dbmail-util -av
pkcs12 /etc/openvpn/easy-rsa/keys/server-cert.p12


#указываем файл Диффи Хельман
если есть ошибки, исправляем не забывая проверить файл конфигурации...<br>
dh /etc/openvpn/easy-rsa/keys/dh2048.pem
.. если все ок, приступаем к настройке '''postfix'''


#задаем IP-адрес сервера и маску подсети
=='''3. Настройка Postfix'''==
ifconfig 10.8.0.1 255.255.255.0


#Если нам лень со статикой заморачиваться
apt-get install postfix postfix-pgsql postfix-sqlite procmail libsasl2-2 libsasl2-modules libsasl2-modules-db\
#server для tun интерфейсов
libsasl2-modules-sql sqlite3 mutt postfix-pcre postfix-ldap postfix-lmdb sasl2-bin ufw
#server 10.8.0.0 255.255.255.0
#ifconfig-pool 10.8.0.5 10.8.0.254 255.255.255.0


#путь к каталогу индивидуальных клиентских конфигураций
* вносим необходимые изменения в файлы конфигурации - пример рабочей версии '''main.cf''':
client-config-dir /etc/openvpn/ccd


#Для назначения статических ip-адресов клиентов
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
#ifconfig-pool-persist ipp.txt
# Debian specific:  Specifying a file name will cause the first
# line of that file to be used as the name.  The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
readme_directory = no
# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
# fresh installs.
compatibility_level = 2
# TLS parameters
'''#smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem'''
'''#smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key'''
'''smtpd_tls_cert_file=/etc/postfix/ssl/smtpd.pem'''
'''smtpd_tls_key_file=/etc/postfix/ssl/smtpd.key'''
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
'''smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination'''
'''myhostname = mymail.home.local'''
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
'''mydestination = $myhostname, mymail.ru, mymail.home.local, localhost.home.local, localhost'''
relayhost =
'''#mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128'''
'''######################### вторым ip указываем хост где база данных postgresql'''
'''mynetworks = 127.0.0.0/8 10.0.5.2'''
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = all
'''############################## - указываем способ использования postgresql'''
'''local_recipient_maps = pgsql:/etc/postfix/dbmail-mailboxes.cf $alias_maps'''
'''mailbox_transport = dbmail-lmtp:127.0.0.1:24'''
'''#################### - подключаем авторизацию через sasl, установка ниже в статье.'''
'''broken_sasl_auth_clients = yes'''
'''smtpd_sasl_auth_enable = yes'''
'''smtpd_sasl_local_domain ='''
'''############################### - подключаем наш сертификат созданный как описано ниже.'''
'''smtpd_tls_auth_only = no'''
'''smtpd_tls_loglevel = 1'''
'''smtpd_tls_received_header = yes'''
'''smtpd_tls_session_cache_timeout = 3600s'''
'''tls_random_source = dev:/dev/urandom'''


 
* вносим необходимые изменения в файлы конфигурации - пример рабочей версии '''master.cf''':
#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#              (yes)  (yes)  (no)    (never) (100)
# ==========================================================================
smtp      inet  n      -      y      -      -      smtpd
#smtp      inet  n      -      y      -      1      postscreen
#smtpd    pass  -      -      y      -      -      smtpd
#dnsblog  unix  -      -      y      -      0      dnsblog
#tlsproxy  unix  -      -      y      -      0      tlsproxy
#submission inet n      -      y      -      -      smtpd
#  -o syslog_name=postfix/submission
#  -o smtpd_tls_security_level=encrypt
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
#  -o smtpd_recipient_restrictions=
#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps    inet  n      -      y      -      -      smtpd
#  -o syslog_name=postfix/smtps
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
#  -o smtpd_recipient_restrictions=
#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628      inet  n      -      y      -      -      qmqpd
pickup    unix  n      -      y      60      1      pickup
cleanup  unix  n      -      y      -      0      cleanup
qmgr      unix  n      -      n      300    1      qmgr
#qmgr    unix  n      -      n      300    1      oqmgr
tlsmgr    unix  -      -      y      1000?  1      tlsmgr
rewrite  unix  -      -      y      -      -      trivial-rewrite
bounce    unix  -      -      y      -      0      bounce
defer    unix  -      -      y      -      0      bounce
trace    unix  -      -      y      -      0      bounce
verify    unix  -      -      y      -      1      verify
flush    unix  n      -      y      1000?  0      flush
proxymap  unix  -      -      n      -      -      proxymap
proxywrite unix -      -      n      -      1      proxymap
smtp      unix  -      -      y      -      -      smtp
relay    unix  -      -      y      -      -      smtp
#      -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq    unix  n      -      y      -      -      showq
error    unix  -      -      y      -      -      error
retry    unix  -      -      y      -      -      error
discard  unix  -      -      y      -      -      discard
local    unix  -      n      n      -      -      local
virtual  unix  -      n      n      -      -      virtual
lmtp      unix  -      -      y      -      -      lmtp
anvil    unix  -      -      y      -      1      anvil
scache    unix  -      -      y      -      1      scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -      n      n      -      -      pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
#  lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
#  mailbox_transport = lmtp:inet:localhost
#  virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus    unix  -      n      n      -      -      pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix  -      n      n      -      -      pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -      n      n      -      -      pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -      n      n      -      -      pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp    unix  -      n      n      -      -      pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix  -      n      n      -      2      pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman  unix  -      n      n      -      -      pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}
'''######'''
'''dbmail-lmtp    unix    -      -      n      -      -      lmtp'''
        '''-o disable_dns_lookups=yes'''
* создаем файл настройки подключения к базе postgresql - '''dbmail-mailboxes.cf''':


user = dbmail
password = userpass
hosts = 10.0.5.2
dbname = mailbasename
table = dbmail_aliases
select_field = alias
where_field = alias


#push "dhcp-option DNS 10.8.0.1"
* Так как почтовый сервер изначально не рассматсривается как релей, то доступ к '''SMTP''' только по авторизации и для этого используем '''SASL'''.
#push "dhcp-option DOMAIN net.local"
* в каталоге настроек postfix создаем файл настроек для '''sasl''':
#push "dhcp-option DOMAIN-SEARCH net.local"
mkdir -p /etc/postfix/sasl
#push "redirect-gateway"


#пинг каждые 10 секунд для поддержания канала связ
* создаем файл конфигурации - '''smtpd.conf''':
keepalive 10 120
echo > /etc/postfix/sasl/smtpd.conf
* вносим содержимое файла:
edit /etc/postfix/sasl/smtpd.conf


#Связь между клиентами
pwcheck_method: auxprop
client-to-client
auxprop_plugin: sql
mech_list: digest-md5 cram-md5 login plain
sql_engine: pgsql
sql_user: dbmail
sql_passwd: userpass
sql_hostnames: 10.0.5.2
sql_database: mailbasename
sql_statement: select passwd from dbmail_users where userid='%u@%r'
sql_verbose: yes


push "route 10.8.0.0 255.255.255.0"
* генерируем свой сертификат tls:
mkdir -p /etc/postfix/ssl
cd /etc/postfix/ssl
openssl req -new -x509 -days 3650 -nodes -out smtpd.pem -keyout smtpd.key


# включаем шифрацию пакетов
* перезапускаем '''postfix''':
cipher BF-CBC
systemctl postfix restart
или
/etc/init.d/postfix restart


# сжатие трафика
* проверяем работу '''postfix''':
comp-lzo
# telnet mymail.ru 25
Trying mymail.ru...
Connected to mymail.ru.
Escape character is '^]'.
220 mx.kscom.ru ESMTP Postfix
EHLO example.com
250-mx.kscom.ru
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-STARTTLS
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 DSN
QUIT
221 2.0.0 Bye
Connection closed by foreign host.
- должно быть - 250-STARTTLS
- все работает..


# максимум клиентов
=='''4. Настройка Stunnel'''==
max-clients 100
* Данный пакет позволяет организовать защищенное соединение как для почты так и для других программ.<br>
* Далее будет описание, как создать защищенный вход на почтовый сервер.<br>


# Не перечитывать ключи после получения
* Устанавливаем пакет:
# SIGUSR1 или ping-restart
apt-get install stunnel4
persist-key


# Не закрывать и переоткрывать TUN\TAP
* в каталоге /etc/stunnel - сразу создаем себе скрипт для генерации сертификата, чтобы если понадобится снова не вспоминать как это...
# устройство, после получения
echo > /etc/stunnel/create-sert
# SIGUSR1 или ping-restart
editor /etc/stunnel/create-sert
persist-tun


# логгирование (не забудьте создать эту директорию /var/log/openvpn/)
* вносим содержимое:
status /var/log/openvpn/tap-status.log
#!/bin/sh
log /var/log/openvpn/tap.log
# каталог сертификатов SSL в системе
cd /etc/ssl/certs
# имя сертификата на свое усмотрение...
PEMFILE="servername.mymail.ru.pem"
# генерация сертификата
openssl req -new -x509 -nodes -days 3650 -out $PEMFILE -keyout $PEMFILE
chmod 600 $PEMFILE
[ -e temp_file ] && rm -f temp_file
dd if=/dev/urandom of=temp_file count=2
openssl dhparam -rand temp_file 512 >> $PEMFILE
ln -sf $PEMFILE `openssl x509 -noout -hash < $PEMFILE`.0
 
* даем права на исполнение - только для root:
chmod 0700 /etc/stunnel/create-sert


# Уровень информации для отладки 0 - 11
* запускаем скрипт и отвечаем на вопросы..
verb 6
/etc/stunnel/create-sert


</nowiki>
* создаем каталог в котором будет файл запуска .pid
mkdir -p /var/run/stunnel4/


====/etc/openvpn/server_tun.conf====
* копируем из примера будущий конфигурационный файл для stunnel4
<nowiki>
cp /usr/share/doc/stunnel4/examples/stunnel.conf-sample /etc/stunnel/stunnel.conf
mode server
tls-server
daemon
local 192.168.0.226
port 1194


# TCP or UDP server?
* приводим его в такой вариант (рабочий пример):
##;proto tcp
; Sample stunnel configuration file for Unix by Michal Trojnara 2002-2015
proto udp
; Some options used here may be inadequate for your particular configuration
; This sample file does *not* represent stunnel.conf defaults
; Please consult the manual for detailed description of available options
; **************************************************************************
; * Global options                                                        *
; **************************************************************************
; It is recommended to drop root privileges if stunnel is started by root
;setuid = stunnel4
;setgid = stunnel4
; PID file is created inside the chroot jail (if enabled)
pid = /var/run/stunnel4/stunnel.pid
; Debugging stuff (may be useful for troubleshooting)
;foreground = yes
;debug = info
output = /var/log/stunnel.log
; Enable FIPS 140-2 mode if needed for compliance
;fips = yes
fips = no
; **************************************************************************
; * Service defaults may also be specified in individual service sections  *
; **************************************************************************
; Enable support for the insecure SSLv3 protocol
options = -NO_SSLv3
sslVersion = TLSv1.2
; These options provide additional security at some performance degradation
;options = SINGLE_ECDH_USE
;options = SINGLE_DH_USE
; **************************************************************************
; * Include all configuration file fragments from the specified folder    *
; **************************************************************************
;include = /etc/stunnel/conf.d
; **************************************************************************
; * Service definitions (remove all services for inetd mode)              *
; **************************************************************************
; ***************************************** Example TLS client mode services
; The following examples use /etc/ssl/certs, which is the common location
; of a hashed directory containing trusted CA certificates.  This is not
; a hardcoded path of the stunnel package, as it is not related to the
; stunnel configuration in /etc/stunnel/.
;[mymail-pop3]
;client = yes
;accept = 127.0.0.1:110
;connect = pop3.mymail.ru:995
;verifyChain = yes
;CApath = @sysconfdir/ssl/certs
;checkHost = pop3s.mymail.ru
;OCSPaia = yes
;[mymail-imap]
;client = yes
;accept = 127.0.0.1:143
;connect = imap.mymail.ru:993
;verifyChain = yes
;CApath = @sysconfdir/ssl/certs
;checkHost = imaps.mymail.ru
;OCSPaia = yes
;[mymail-smtp]
;client = yes
;accept = 127.0.0.1:25
;connect = smtp.mymail.ru:465
;verifyChain = yes
;CApath = @sysconfdir/ssl/certs
;checkHost = smtps.mymail.ru
;OCSPaia = yes
; ***************************************** Example TLS server mode services
[pop3s]
accept  = 995
connect = 110
cert = /etc/ssl/certs/servername.mymail.ru.pem
[imaps]
accept  = 993
connect = 143
cert = /etc/ssl/certs/servername.mymail.ru.pem
[smtps]
accept  = 465
connect = 25
cert = /etc/ssl/certs/servername.mymail.ru.pem
; TLS front-end to a web server
;[https]
;accept  = 443
;connect = 80
;cert = /etc/stunnel/stunnel.pem
; "TIMEOUTclose = 0" is a workaround for a design flaw in Microsoft SChannel
; Microsoft implementations do not use TLS close-notify alert and thus they
; are vulnerable to truncation attacks
;TIMEOUTclose = 0
; Remote shell protected with PSK-authenticated TLS
; Create "/etc/stunnel/secrets.txt" containing IDENTITY:KEY pairs
;[shell]
;accept = 1337
;exec = /bin/sh
;execArgs = sh -i
;ciphers = PSK
;PSKsecrets = /etc/stunnel/secrets.txt
; Non-standard MySQL-over-TLS encapsulation connecting the Unix socket
;[mysql]
;cert = /etc/stunnel/stunnel.pem
;accept = 3307
;connect = /run/mysqld/mysqld.sock
; vim:ft=dosini


##;dev tap
* корректируем конфигурационный файл запуска по умолчанию:
dev tun
# /etc/default/stunnel
# Julien LEMOINE <speedblue@debian.org>
# September 2003
# Change to one to enable stunnel automatic startup
ENABLED=1
FILES="/etc/stunnel/*.conf"
OPTIONS=""
# Change to one to enable ppp restart scripts
PPP_RESTART=0
# Change to enable the setting of limits on the stunnel instances
# For example, to set a large limit on file descriptors (to enable
# more simultaneous client connections), set RLIMITS="-n 4096"
# More than one resource limit may be modified at the same time,
# e.g. RLIMITS="-n 4096 -d unlimited"
RLIMITS=""


#tun-mtu 1492
* перезапуск stunnel
#указываем файл с ключем сервера
/etc/init.d/stunnel4 restart
pkcs12 /etc/openvpn/easy-rsa/keys/server-cert.p12


#указываем файл Диффи Хельман
* после этого проверяем наличие нужных нам портов:
dh /etc/openvpn/easy-rsa/keys/dh2048.pem
nmap -v mymail.ru
...
PORT    STATE SERVICE
22/tcp  open  ssh
25/tcp  open  smtp
110/tcp open  pop3
143/tcp open  imap
465/tcp open  smtps
993/tcp open  imaps
995/tcp open  pop3s


## ipaddr server
* проверяем работу с почтой по '''SSL\TLS''' - зашифрованный пароль на портах '''465,993,995'''
server 10.7.0.0 255.255.255.0
* если все в порядке, рекомендую закрыть обычные порты через '''iptables''' ('''110,143'''),
* а оставить только '''25''' (некоторые серверы для доставки вам почты требуют именно его)


=='''5. Установка антиспама Spamassassin'''==


* установка пакета:
aptitude install spamassassin


#### clients ip
* запуск по умолчанию в /etc/default/spamassassin
client-config-dir ddc
...
push "route 10.8.0.0 255.255.255.0 10.8.0.1"
ENABLED=1
push "route 10.7.0.0 255.255.255.0 10.7.0.1"
...
#push dhcp-option DNS 10.5.7.1


* Приводим файл конфигурации антиспама /etc/spamassassin/local.cf  к такому:


#push dhcp-option DOMAIN net.local
# This is the right place to customize your installation of SpamAssassin.
client-to-client
#
#########
# See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
#auth MD5
# tweaked.
# включаем шифрацию пакетов
#
cipher BF-CBC
# Only a small subset of options are listed below
keepalive 10 120
#
###########################################################################
#  Add *****SPAM***** to the Subject header of spam e-mails
#
rewrite_header Subject *****SPAM*****
#  Save spam messages as a message/rfc822 MIME attachment instead of
#  modifying the original message (0: off, 2: use text/plain instead)
#
report_safe 0
#  Set which networks or hosts are considered 'trusted' by your mail
#  server (i.e. not spammers)
#
# trusted_networks 212.17.35.
trusted_networks 10.0.5.
#  Set file-locking method (flock is not safe over NFS, but is faster)
#
# lock_method flock
#  Set the threshold at which a message is considered spam (default: 5.0)
#
required_score 5.0
#  Use Bayesian classifier (default: 1)
#
use_bayes 1
#  Bayesian classifier auto-learning (default: 1)
#
bayes_auto_learn 1
#  Set headers which may provide inappropriate cues to the Bayesian
#  classifier
#
bayes_ignore_header X-Bogosity
bayes_ignore_header X-Spam-Flag
bayes_ignore_header X-Spam-Status
#  Whether to decode non- UTF-8 and non-ASCII textual parts and recode
#  them to UTF-8 before the text is given over to rules processing.
#
# normalize_charset 1
#  Some shortcircuiting, if the plugin is enabled
#
ifplugin Mail::SpamAssassin::Plugin::Shortcircuit
#
#  default: strongly-whitelisted mails are *really* whitelisted now, if the
#  shortcircuiting plugin is active, causing early exit to save CPU load.
#  Uncomment to turn this on
#
# shortcircuit USER_IN_WHITELIST      on
# shortcircuit USER_IN_DEF_WHITELIST  on
# shortcircuit USER_IN_ALL_SPAM_TO    on
# shortcircuit SUBJECT_IN_WHITELIST    on
#   the opposite; blacklisted mails can also save CPU
#
# shortcircuit USER_IN_BLACKLIST      on
# shortcircuit USER_IN_BLACKLIST_TO    on
# shortcircuit SUBJECT_IN_BLACKLIST    on
#   if you have taken the time to correctly specify your "trusted_networks",
#  this is another good way to save CPU
#
# shortcircuit ALL_TRUSTED            on
#  and a well-trained bayes DB can save running rules, too
#
# shortcircuit BAYES_99                spam
# shortcircuit BAYES_00                ham
whitelist_from @mymail.ru
endif # Mail::SpamAssassin::Plugin::Shortcircuit
* Стартуем spamassasin:


# сжатие трафика
/etc/init.d/spamassassin start
comp-lzo


# максимум клиентов
* Редактируем файл постфикса /etc/postfix/master.cf
max-clients 100
- Строку:
..
smtp      inet  n      -      -      -      -      smtpd
..
- Заменяем на:
..
smtp      inet  n      -      -      -      -      smtpd -o content_filter=spamassassin
..


# Не перечитывать ключи после получения
- Перед:
# SIGUSR1 или ping-restart
..
persist-key
dbmail-lmtp    unix    -       -      n      -      -      lmtp
        -o disable_dns_lookups=yes
..


# Не закрывать и переоткрывать TUN\TAP
- Добавляем:
# устройство, после получения
..
# SIGUSR1 или ping-restart
spamassassin unix  -  n  n  -  -  pipe  user=debian-spamd argv=/usr/bin/spamc -s 5120000 -f -e /usr/sbin/sendmail -oi -f
persist-tun
${sender}${recipient}
..


# логгирование (не забудьте создать эту дирректорию /var/log/openvpn/)
* Перезапускаем '''postfix''':
status /var/log/openvpn/tun-status.log
log /var/log/openvpn/tun.log
/etc/init.d/postfix restart


# Уровень информации для отладки
* Проверяем работу почты, все должно работать...
verb 6</nowiki>




====клиент Linux tap /etc/openvpn/client.conf====
<hr>


<nowiki>
Источники:
client
<hr>
dev tap0
* [https://www.opennet.ru/docs/RUS/dbmail_postfix/ Почтовый сервер на основе реляционной СУБД.]
proto tcp-client
* [http://library.mobrien.com/dbmailadministrator/ GUI-конфигуратора DbMail Administrator (DBMA), написанного на Perl]
remote 192.168.0.226 1194
* [https://habrahabr.ru/post/37195/ Настройка exim+postgresql+dbmail+spamassassin...]
resolv-retry infinite
* [https://www.opennet.ru/docs/RUS/dbmail/#dbmail_fs Создание почтовой системы на базе exim, dbmail, amavisd-new и postgresql]
nobind
* [https://www.opennet.ru/docs/RUS/dbmail_postfix/ Почтовый сервер на основе реляционной СУБД]
#user nobody
* [https://habrahabr.ru/post/211078/ Почтовый сервер с хранением данных в PostgreSQL]
#group nobody
* [https://www.opennet.ru/base/net/exim_intro.txt.html Exim (exim mail mta virtual spam virus clamav freebsd imap postgresql)]
persist-key
* [http://www.linuxcenter.ru/lib/articles/soft/ezh_mailsystem.phtml?style=print Создание почтовой системы на базе exim, dbmail, amavisd-new и postgresql]
persist-tun
* [https://www.lissyara.su/archive/exim+dbmail/ Exim и dbmail]
pkcs12 lopic85.p12
* [https://vovanys.com/linux/pochtovyj-server-pod-ubuntu-server-svyazka-dbmail-postfix-sasl-spamassassin-clamav/ Почтовый сервер под Ubuntu Server: связка DBmail + Postfix + sasl + spamassassin + clamav]
ns-cert-type server
* [http://samag.ru/archive/article/608 Почтовый сервер на основе реляционной СУБД - переработанное]
comp-lzo
* [http://www.wertup.ru/ubuntu/mail-server Почтовый сервер cвязка DBmail + Postfix + sasl + spamassassin + clamav + DBMA + Roundcube webmail]
status /var/log/openvpn/openvpn-status.log
* [https://www.lissyara.su/articles/freebsd/mail/postfix+dbmail/ Почтовая система Postfix + DBMail + SASL2 + TLS + DSpam + ClamAV + RoundCubeWebMail]
log /var/log/openvpn/openvpn.log
* [http://www.dbmail.org/dokuwiki/doku.php/stunnel How to set up and use encrypted connections with DBmail]
verb 6
* [https://notessysadmin.com/postfix-perenapravlenie-pochty Postfix. Перенаправление почты]
mute 20
* [https://toster.ru/q/53106 Postfix пересылка всей входящей почты на другой ящик]
auth-nocache
 
</nowiki>
 
====клиент Linux tun /etc/openvpn/client.conf====
<nowiki>
client
dev tun0
proto udp
remote 192.168.0.226 1194
resolv-retry infinite
nobind
#user nobody
#group nobody
persist-key
persist-tun
pkcs12 lopic85.p12
ns-cert-type server
comp-lzo
status /var/log/openvpn/openvpn-status.log
log /var/log/openvpn/openvpn.log
verb 6
mute 20
auth-nocache
 
</nowiki>
 
 
====клиент Windows c:\Program files\Openvpn\conf\client.ovpn====
 
Конфиг как на линукс клиенте кроме двух строк:
<nowiki>status /var/log/openvpn/openvpn-status.log
log /var/log/openvpn/openvpn.log</nowiki>
Их надо удалить. Лог пишется в папке C:\Users\Пользователь\Openvpn
 
===КОСТЫЛЬ №1 Присвоение постоянных ip клиентам openvpn 2.4.0===
После написания файла lopic.crt, и перезагрузки openvpn ip выдавался следующий после сервера 10.8.0.2, а не тот который прописан в lopic.crt
 
'''Нужно:'''
# '''ОСТАНОВИТЬ''' openvpn
# в файле /etc/openvpn/ipp.txt прописать в новой строке ''''''lopic,10.8.0.13'''''' (зяпятая между именем и ip без пробелов). lopic.crt уже должен быть
# запустить openvpn
 
UPD: Перед добавлением следующего клиента скопировать ipp.txt, потом остановить openvpn, вернуть ipp.txt, внести изменения в ipp.txt и потом запустить openvpn. Это точно фича, либо моя криворукость.
 
===КОСТЫЛЬ №2 Автостарт openvpn 2.4.0 в systemd===
Не знаю, баг это или фича, но на сервере сервисы  openvpn.service и openvpn@.service активны, загружены и исполнены, а интерфейса нет.
 
'''Как сдел я:'''
# /etc/scripts/ovpn_restart.sh
<nowiki>#!/bin/bash
sleep 10
systemctl restart openvpn
exit 0
</nowiki>
# /etc/systemd/system/ovpn.service
<nowiki>
[Unit]
Description=OpenVPN restart kostil
After=syslog.target network.target
After=openvpn.service
 
[Service]
Type=forking
ExecStart=/etc/scripts/ovpn_restart.sh
 
[Install]
WantedBy=multi-user.target</nowiki>
#systemctl enable ovpn.service
 
Конечно наколхозил, но работает :D
 
 
===Пропускная способность===
 
На HP procurve c 100Мбит/с интерфейсами через ssh прокачал 11.3 Мбайт/с

Версия от 01:48, 19 февраля 2018

Руководство для быстрого развертывания собственного сервера почты.

  • Данная статья появилась тут в связи с тем, что я столкнулся с проблемой переноса почтового сервера на обычной файловой системе.

В первую очередь с тем, что почта была организована на уже устаревшем ПО и перенос ее на новую платформу без потерь стал практически не возможен. А вот хранение почты в базе данных, дает огромные преимущества при обновлении или доступе к информации, а так же восстановлении. В частности у меня база данных находится на другом хосте, что сильно облегчает ее обслуживание, при этом все конфигурационные файлы самой почты можно легко повторить если понадобится на новом хосте для создания почтового сервера заново.

1. Порядок установки dbmail

  • Система Debian Stretch {9}
  • Используемый source.list
# 
deb http://mirror.mephi.ru/debian/ stretch main
deb-src http://mirror.mephi.ru/debian/ stretch main

deb http://security.debian.org/debian-security stretch/updates main
deb-src http://security.debian.org/debian-security stretch/updates main 

# stretch-updates, previously known as 'volatile'
deb http://mirror.mephi.ru/debian/ stretch-updates main
deb-src http://mirror.mephi.ru/debian/ stretch-updates main

###### Debian Main Repos
deb http://deb.debian.org/debian/ stable main contrib non-free
deb-src http://deb.debian.org/debian/ stable main contrib non-free

deb http://deb.debian.org/debian/ stable-updates main contrib non-free
deb-src http://deb.debian.org/debian/ stable-updates main contrib non-free

deb http://deb.debian.org/debian-security stable/updates main contrib non-free
deb-src http://deb.debian.org/debian-security stable/updates main contrib non-free

deb http://ftp.debian.org/debian stretch-backports main contrib non-free
deb-src http://ftp.debian.org/debian stretch-backports main contrib non-free

1.1 Устанавливаем необходимые пакеты:

apt-get install pkg-config libglib2.0-dev libgmime-2.6-dev libmhash-dev libevent-dev libssl-dev libzdb-dev\
autoconf automake libtool autotools-dev dpkg-dev fakeroot debhelper dh-make libldap2-dev libsieve2-dev ascidoc\
libcrypto++6 libcrypto++-utils libcrypto++-dev xmlto xmltoman libarchive-tools lrzip binutils-multiarch\
arch-test libpgf-dev libsasl2-modules-db libsasl2-modules curl libcroco3 libsasl2-2 procmail libsasl2-modules-sql\
libpcre32-3 zlib1g-dev libmhash-dev libpcrecpp0v5 

1.2 Скачиваем с dbmail.org исходники:

wget -c -t 0 -T 8 http://www.dbmail.org/download/3.1/dbmail-3.1.17.tar.gz

1.3 Распаковываем и компилируем:

cp dbmail-3.1.17.tar.gz /usr/local/src
tar -xf dbmail-3.1.17.tar.gz /usr/local/src.dbmail-3.1.7
cp dbmail-3.1.17.tar.gz /usr/local/src/dbmail_3.1.7.orig.tar.gz
  • [!] - не знаю, может так у меня получилось, но когда применяешь комменты, версия которая высвечивается именно 3.1.7!!
  • [!] - именно поэтому все, что тут распаковываем и создаем имеет версию - 3.1.7 ...

Готовим пакет к сборке:

cd /usr/local/src/dbmail-3.1.7
./configure --prefix=/usr
 
dpkg-source --commit

даем имя, что-то: pgsql.commit
выходим по ESC
должно быть так:

...
dpkg-source: инфо: локальные изменения были записаны в новую заплату: dbmail-3.1.7/debian/patches/pgsql.commit

далее:

cd /usr/local/src/
dpkg-source -b dbmail-3.1.7
cd /usr/local/src/dbmail-3.1.7
dpkg-buildpackage -d
  • [!] - если у вас появилось сообщение типа:
...
debian/rules:138: *** missing separator (did you mean TAB instead of 8 spaces?).  Останов.
dpkg-buildpackage: ошибка: debian/rules clean возвратил код ошибки 2
  • [!] - то необходимо исправить ошибку в файле dbmail-3.1.7/debian/rules
строка 138: 
........make -f debian/rules binary-common $* DH_OPTIONS=-p$*
     ^^^
   здесь 8 пробелов!! - а должно быть 2 табуляции, что и вызывает ошибку...
  • после того как соберется пакет, дожно быть так:
# ls -n /usr/local/src
итого 3668
drwxrwxr-x 13 0  0    4096 ноя  2 00:19 dbmail-3.1.7
-rw-r--r--  1 0 50    7597 ноя  2 00:19 dbmail_3.1.7-1_amd64.buildinfo
-rw-r--r--  1 0 50    1957 ноя  2 00:19 dbmail_3.1.7-1_amd64.changes
-rw-r--r--  1 0 50  349256 ноя  2 00:19 dbmail_3.1.7-1_amd64.deb
-rw-r--r--  1 0 50  148008 ноя  2 00:14 dbmail_3.1.7-1.debian.tar.xz
-rw-r--r--  1 0 50    1045 ноя  2 00:14 dbmail_3.1.7-1.dsc
-rw-r--r--  1 0  0 2391054 июл 27  2014 dbmail_3.1.7.orig.tar.gz
-rw-r--r--  1 0 50  838508 ноя  2 00:19 dbmail-dbgsym_3.1.7-1_amd64.deb
  • копируем себе в архив и ставим пакет.
dpkg -i dbmail_3.1.7-1_amd64.deb
  • правим файл конфигурации:
editor /etc/dbmail/dbmail.conf
  • пример рабочего конфигурационного файла:
# (c) 2000-2006 IC&S, The Netherlands 
#
# Configuration file for DBMAIL 

[DBMAIL] 
# 
# Database settings
#
# database connection URI

#dburi                = sqlite:///var/tmp/dbmail.db

# 
# Supported drivers are sql, ldap.
#
authdriver           = sql

# 
# 
# following fields are now DEPRECATED!
driver               = postgresql
host                 = 10.0.5.2
sqlport              = 5432
#sqlsocket            =              
user                 = dbmail
pass                 = dbmailpass
db                   = mailbasename

#
# Number of database connections per threaded daemon
# This also determines the size of the worker threadpool
#
# Do NOT increase this without proper consideration. A
# very large database/worker pool will not only increase
# the connection pressure on the database, but will more
# significantly cause unnecessary context-switching in 
# your CPUs.
#
#max_db_connections   = 10

# 
# Table prefix. Defaults to "dbmail_" if not specified.
#
table_prefix         = dbmail_   

# 
# encoding must match the database/table encoding.
# i.e. latin1, utf8
encoding             = utf8

#
# messages with unknown encoding will be assumed to have 
# default_msg_encoding
# i.e. iso8859-1, utf8
default_msg_encoding = utf8

# 
# Postmaster's email address for use in bounce messages.
#
#postmaster           = DBMAIL-MAILER       

# 
# Sendmail executable for forwards, replies, notifies, vacations.
# You may use pipes (|) in this command, for example:
# dos2unix|/usr/sbin/sendmail  works well with Qmail.
# You may use quotes (") for executables with unusual names.
#
sendmail              = /usr/sbin/sendmail     

#
#
# The following items can be overridden in the service-specific sections.
#
#

#
# Logging via stderr/log file and syslog
#
# Logging is broken up into 8 logging levels and each level can be indivually turned on or off.
# The Stderr/log file logs all entries to stderr or the log file.
# Syslog logging uses the facility mail and the logging level of the event for logging.
# Syslog can then be configured to log data according to the levels.
#
# Set the log level to the sum of the values next to the levels you want to record.
#   1 = Emergency 
#   2 = Alert
#   4 = Critical
#   8 = Error
#  16 = Warning
#  32 = Notice
#  64 = Info
# 128 = Debug
# 256 = Database -> Logs at debug level
#
# Examples:   0 = Nothing
#            31 = Emergency + Alert + Critical + Error + Warning
#           511 = Everything
#
file_logging_levels       = 7
#
syslog_logging_levels     = 31

#
# Generate a log entry for database queries for the log level at number of seconds of query execution time.
#
query_time_info       = 10
query_time_notice     = 20
query_time_warning    = 30

#
# Throw an exception is the query takes longer than query_timeout seconds
query_timeout         = 300 

# 
# Root privs are used to open a port, then privs
# are dropped down to the user/group specified here.
#
effective_user        = dbmail
effective_group       = mail

# 
# The IPv4 and/or IPv6 addresses the services will bind to.
# Use * for all local interfaces.
# Use 127.0.0.1 for localhost only.
# Separate multiple entries with spaces ( ) or commas (,).
#
bindip                = 0.0.0.0         # IPv4 only - all IP's
#bindip                = ::             # IPv4 and IPv6 - all IP's (linux)
#bindip                = ::             # IPv6 only - all IP's (BSD)
#bindip                = 0.0.0.0,::     # IPv4 and IPv6 - all IP's (BSD)


#
# The maximum length of the queue of pending connections. See
# listen(2) for more information
#
# backlog              = 128

# 
# Idle time allowed before a connection is shut off.
#
timeout               = 300             

# 
# Idle time allowed before a connection is shut off if you have not logged in yet.
#
login_timeout         = 60

# 
# If yes, resolves IP addresses to DNS names when logging.
#
resolve_ip            = yes

#
# If yes, keep statistics in the authlog table for connecting users
#
authlog               = no

# 
# logfile for stdout messages
#
logfile               = /var/log/dbmail.log        

# 
# logfile for stderr messages
#
errorlog              = /var/log/dbmail.err        

# 
# directory for storing PID files
#
pid_directory         = /var/run/dbmail

#
# directory for locating libraries (normally has a sane default compiled-in)
#
library_directory       = /usr/lib/dbmail

#
# SSL/TLS certificates
#
# A file containing a list of CAs in PEM format
tls_cafile            =

# A file containing a PEM format certificate
tls_cert              =

# A file containing a PEM format RSA or DSA key
tls_key               =

# A cipher list string in the format given in ciphers(1)
tls_ciphers           =


# hashing algorithm. You can select your favorite hash type
# for generating unique ids for message parts. 
#
# for valid values check mhash(3) but minus the MHASH_ prefix.
#  
# if you ever change this value run 'dbmail-util --rehash' to 
# update the hash for all mimeparts.
#
# examples: MD5, SHA1, SHA256, SHA512, TIGER, WHIRLPOOL
#
# hash_algorithm = SHA1


# header_cache tuning
#
# set header_cache_readonly to 'yes' to prevent new
# unknown header-names from being cached.
#
# header_cache_readonly = yes



[LMTP]
bindip = 127.0.0.1
port                  = 24                 
#tls_port              =


[POP]
port                  = 110
#tls_port              = 995

# You can set an alternate banner to display when connecting to the service
# banner = DBMAIL pop3 server ready to rock

# 
# If yes, allows SMTP access from the host IP connecting by POP3.
# This requires addition configuration of your MTA
#
pop_before_smtp       = no      

[HTTP]
port                  = 41380
#
# the httpd daemon provides full access to all users, mailboxes
# and messages. Be very careful with this one!
bindip                = 127.0.0.1
admin                 = admin:secret

[IMAP]
# You can set an alternate banner to display when connecting to the service
# banner = imap 4r1 server (dbmail 2.3.x)

# 
# Port to bind to.
#
port                  = 143                
##tls_port              = 993

# 
# IMAP prefers a longer timeout than other services.
#
timeout               = 4000            

# 
# If yes, allows SMTP access from the host IP connecting by IMAP.
# This requires addition configuration of your MTA
#
imap_before_smtp      = no

#
# during IDLE, how many seconds between checking the mailbox
# status (default: 30)
#
# idle_timeout          = 30

# during IDLE, how often should the server send an '* OK' still
# here message (default: 10)
#
# the time between such a message is idle_timeout * idle_interval
# seconds
#
# idle_interval         = 10

#
# If TLS is enabled, login before starttls is normally
# not allowed. Use login_disabled=no to change this
#
# login_disabled        = yes

#
# Provide a CAPABILITY to override the default
#
# capability   = IMAP4 IMAP4rev1 AUTH=LOGIN ACL RIGHTS=texk NAMESPACE CHILDREN SORT QUOTA THREAD=ORDEREDSUBJECT UNSELECT IDLE

# max message size. You can specify the maximum message size
# accepted by the IMAP daemon during APPEND commands.
#
# Supported formats:
#  decimal: 1000000    
#  octal:   03777777
#  hex:     0xfffff
#
# max_message_size      =


[SIEVE]
# 
# Port to bind to.
#
port                  = 2000               
tls_port              =


[LDAP]
port                  = 389
version               = 3
hostname              = ldap
base_dn               = ou=People,dc=mydomain,dc=com

# 
# If your LDAP library supports ldap_initialize(), then you can use the
# alternative LDAP server DSN like following.
#
# URI                = ldap://127.0.0.1:389
# URI                = ldapi://%2fvar%2frun%2fopenldap%2fldapi/

# 
# Leave blank for anonymous bind.
# example: cn=admin,dc=mydomain,dc=com     
#
bind_dn               = 

# 
# Leave blank for anonymous bind.
#
bind_pw               = 
scope                 = SubTree

# AD users may want to set this to 'no' to disable
# ldap referrals if you are seeing 'Operations errors' 
# in your logs
#
referrals             = yes

user_objectclass      = top,account,dbmailUser
forw_objectclass      = top,account,dbmailForwardingAddress
cn_string             = uid
field_passwd          = userPassword
field_uid             = uid
field_nid             = uidNumber
min_nid               = 10000
max_nid               = 15000
field_cid             = gidNumber
min_cid               = 10000
max_cid               = 15000

# a comma-separated list of attributes to match when searching
# for users or forwards that match a delivery address. A match
# on any of them is a hit.
field_mail            = mail

# field that holds the mail-quota size for a user.
field_quota           = mailQuota

# field that holds the forwarding address. 
field_fwdtarget       = mailForwardingAddress

# override the query string used to search for users 
# or forwards with a delivery address.
# query_string          = (mail=%s)

[DELIVERY]
# 
# Run Sieve scripts as messages are delivered.
#
SIEVE                 = yes               

# 
# Use 'user+mailbox@domain' format to deliver to a mailbox.
#
SUBADDRESS            = yes          

# 
# Turn on/off the Sieve Vacation extension.
#
SIEVE_VACATION        = yes      

# 
# Turn on/off the Sieve Notify extension
#
SIEVE_NOTIFY          = yes

# 
# Turn on/off additional Sieve debugging.
#
SIEVE_DEBUG           = no          


# Use the auto_notify table to send email notifications.
#
AUTO_NOTIFY           = no
 
# 
# Use the auto_reply table to send away messages.
#
AUTO_REPLY            = no

# 
# Defaults to "NEW MAIL NOTIFICATION"
#
#AUTO_NOTIFY_SUBJECT        =    

# 
# Defaults to POSTMASTER from the DBMAIL section.
#
#AUTO_NOTIFY_SENDER        =   


# If you set this to 'yes' dbmail will check for duplicate
# messages in the relevant mailbox during delivery using 
# the Message-ID header
#
suppress_duplicates     = no

#
# Soft or hard bounce on over-quota delivery
#
quota_failure           = hard


# end of configuration file

  • правим default конфигурационный файл - /etc/default/dbmail
# debian specific configuration for dbmail

# work-around for linux/epoll bug in libevent
export EVENT_NOEPOLL=yes

# comment out to disable the pop3 server
START_POP3D=true

# comment out to disable the imapd server
START_IMAPD=true

# uncomment to enable the lmtpd server
START_LMTPD=true

# uncomment to enable the timsieved server
#START_SIEVE=true

# comment out to enable the stunnel SSL wrapper
START_SSL=true

# specify the filename for the pem file as 
# it resides in /etc/ssl/certs
PEMFILE="/etc/ssl/serts/dbmail.pem"
  • создаем сертификат для dbmail:
cd /etc/ssl/certs
openssl req -new -x509 -nodes -out dbmail.pem -keyout smtpd.pem -days 3650
  • перезапуск службы:
systemctl restart dbmail
  • Краткое пояснение:
1. Предназначенные для доставки сообщений от MTA в хранилище.
2. Предназначенные для доставки MUA из хранилища.
  • К первым относятся:

dbmail-lmtpd – UNIX-демон, принимающий клиентские подключения через UNIX-сокет или TCP-сокет. Для приема почтовых сообщений используется протокол LMTP. На каждое входящее сообщение MTA создает только клиентский сокет, необходимое количество процессов и подключений к БД создается заранее.
Таким образом, этот вариант обеспечивает лучшую производительность при высокой нагрузке, но при низкой он потребляет больше системных ресурсов, чем необходимо.

  • Ко вторым относятся:

dbmail-pop3d – демон для доступа по протоколу POP3.
dbmail-imapd – демон для доступа по протоколу IMAP.

  • Кроме того, в состав DBMail входят следующие вспомогательные утилиты:

dbmail-users – инструмент для управления пользователями и их псевдонимами (возможно, многим из вас будет привычнее термин alias).
dbmail-util – инструмент для очистки, оптимизации и проверки корректности БД.

  • С установкой dbmail пока окончено, следующий этап установка postgesql и настройка для будущей работы.


2. Настройка PostgreSQL

2.1. После того как мы настроили базу данных postgresql, создаем пользователя dbmail и базу dbmail

  • Создаем пользователя для работы с почтовой базой
createuser -U postgres -P dbmail
  • [!] - Ни в коем случае не используйте спецсимволы в пароле, кроме #! (авторизация может не проходить)
  • Создаем базу
createdb -U postgres --owner dbmail dbmail
  • Вместе с dbmail идут заготовки базы, распаковываем и заливаем:
bunzip2 /usr/share/doc/dbmail-2.2.10/create_tables.pgsql.bz2
psql -U dbmail -d dbmail < /usr/share/doc/dbmail-2.2.10/create_tables.pgsql

или так:

zcat /usr/share/doc/dbmail/examples/create_tables.pgsql.gz|psql -h 127.0.0.1 dbmail dbmailadmin

или так:

psql -U dbmail -h localhost maildb < create_tables.pgsql


  • В этом дампе нет таблицы для работы с виртуальными доменами, создадим ее:
 CREATE TYPE dtype AS ENUM ( 
 'LOCAL', 
 'VIRTUAL', 
 'RELAY' 
); 

ALTER TYPE public.dtype OWNER TO dbmail; 

SET default_with_oids = true; 

CREATE TABLE dbmail_domains ( 
 uid integer NOT NULL, 
 domain character varying(128) NOT NULL, 
 type dtype NOT NULL 
);

INSERT INTO dbmail_domains (uid, domain, type) VALUES (1, 'example.com', 'LOCAL');

База готова.

  • добавляем обработку базы в /etc/crontab
...
0 3 * * * root /usr/sbin/dbmail-util -cturpd -l 24h -qq
...
  • проверяем работу dbmail c базой:
dbmail-util -av

если есть ошибки, исправляем не забывая проверить файл конфигурации...
.. если все ок, приступаем к настройке postfix

3. Настройка Postfix

apt-get install postfix postfix-pgsql postfix-sqlite procmail libsasl2-2 libsasl2-modules libsasl2-modules-db\ 
libsasl2-modules-sql sqlite3 mutt postfix-pcre postfix-ldap postfix-lmdb sasl2-bin ufw 
  • вносим необходимые изменения в файлы конфигурации - пример рабочей версии main.cf:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version


# Debian specific:  Specifying a file name will cause the first
# line of that file to be used as the name.  The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname

smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no

# appending .domain is the MUA's job.
append_dot_mydomain = no

# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h

readme_directory = no

# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
# fresh installs.
compatibility_level = 2

# TLS parameters
#smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
#smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_tls_cert_file=/etc/postfix/ssl/smtpd.pem
smtpd_tls_key_file=/etc/postfix/ssl/smtpd.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache

# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.

smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
myhostname = mymail.home.local
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = $myhostname, mymail.ru, mymail.home.local, localhost.home.local, localhost
relayhost = 
#mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
######################### вторым ip указываем хост где база данных postgresql
mynetworks = 127.0.0.0/8 10.0.5.2
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = all
############################## - указываем способ использования postgresql
local_recipient_maps = pgsql:/etc/postfix/dbmail-mailboxes.cf $alias_maps
mailbox_transport = dbmail-lmtp:127.0.0.1:24

#################### - подключаем авторизацию через sasl, установка ниже в статье.
broken_sasl_auth_clients = yes
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = 
############################### - подключаем наш сертификат созданный как описано ниже.
smtpd_tls_auth_only = no
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom


  • вносим необходимые изменения в файлы конфигурации - пример рабочей версии master.cf:
#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (no)    (never) (100)
# ==========================================================================
smtp      inet  n       -       y       -       -       smtpd
#smtp      inet  n       -       y       -       1       postscreen
#smtpd     pass  -       -       y       -       -       smtpd
#dnsblog   unix  -       -       y       -       0       dnsblog
#tlsproxy  unix  -       -       y       -       0       tlsproxy
#submission inet n       -       y       -       -       smtpd
#  -o syslog_name=postfix/submission
#  -o smtpd_tls_security_level=encrypt
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
#  -o smtpd_recipient_restrictions=
#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps     inet  n       -       y       -       -       smtpd
#  -o syslog_name=postfix/smtps
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
#  -o smtpd_recipient_restrictions=
#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628       inet  n       -       y       -       -       qmqpd
pickup    unix  n       -       y       60      1       pickup
cleanup   unix  n       -       y       -       0       cleanup
qmgr      unix  n       -       n       300     1       qmgr
#qmgr     unix  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       y       1000?   1       tlsmgr
rewrite   unix  -       -       y       -       -       trivial-rewrite
bounce    unix  -       -       y       -       0       bounce
defer     unix  -       -       y       -       0       bounce
trace     unix  -       -       y       -       0       bounce
verify    unix  -       -       y       -       1       verify
flush     unix  n       -       y       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       y       -       -       smtp
relay     unix  -       -       y       -       -       smtp
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       y       -       -       showq
error     unix  -       -       y       -       -       error
retry     unix  -       -       y       -       -       error
discard   unix  -       -       y       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       y       -       -       lmtp
anvil     unix  -       -       y       -       1       anvil
scache    unix  -       -       y       -       1       scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
#  mailbox_transport = lmtp:inet:localhost
#  virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix  -       n       n       -       2       pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}
######
dbmail-lmtp     unix    -       -       n       -       -       lmtp
        -o disable_dns_lookups=yes

  • создаем файл настройки подключения к базе postgresql - dbmail-mailboxes.cf:
user = dbmail
password = userpass
hosts = 10.0.5.2
dbname = mailbasename
table = dbmail_aliases
select_field = alias
where_field = alias
  • Так как почтовый сервер изначально не рассматсривается как релей, то доступ к SMTP только по авторизации и для этого используем SASL.
  • в каталоге настроек postfix создаем файл настроек для sasl:
mkdir -p /etc/postfix/sasl
  • создаем файл конфигурации - smtpd.conf:
echo > /etc/postfix/sasl/smtpd.conf
  • вносим содержимое файла:
edit /etc/postfix/sasl/smtpd.conf
pwcheck_method: auxprop
auxprop_plugin: sql
mech_list: digest-md5 cram-md5 login plain
sql_engine: pgsql
sql_user: dbmail
sql_passwd: userpass
sql_hostnames: 10.0.5.2
sql_database: mailbasename
sql_statement: select passwd from dbmail_users where userid='%u@%r'
sql_verbose: yes
  • генерируем свой сертификат tls:
mkdir -p /etc/postfix/ssl
cd /etc/postfix/ssl
openssl req -new -x509 -days 3650 -nodes -out smtpd.pem -keyout smtpd.key
  • перезапускаем postfix:
systemctl postfix restart

или

/etc/init.d/postfix restart
  • проверяем работу postfix:
# telnet mymail.ru 25
Trying mymail.ru...
Connected to mymail.ru.
Escape character is '^]'.
220 mx.kscom.ru ESMTP Postfix
EHLO example.com
250-mx.kscom.ru
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-STARTTLS
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 DSN
QUIT
221 2.0.0 Bye
Connection closed by foreign host.

- должно быть - 250-STARTTLS - все работает..

4. Настройка Stunnel

  • Данный пакет позволяет организовать защищенное соединение как для почты так и для других программ.
  • Далее будет описание, как создать защищенный вход на почтовый сервер.
  • Устанавливаем пакет:
apt-get install stunnel4
  • в каталоге /etc/stunnel - сразу создаем себе скрипт для генерации сертификата, чтобы если понадобится снова не вспоминать как это...
echo > /etc/stunnel/create-sert
editor /etc/stunnel/create-sert
  • вносим содержимое:
#!/bin/sh
# каталог сертификатов SSL в системе
cd /etc/ssl/certs
# имя сертификата на свое усмотрение...
PEMFILE="servername.mymail.ru.pem"
# генерация сертификата
openssl req -new -x509 -nodes -days 3650 -out $PEMFILE -keyout $PEMFILE
chmod 600 $PEMFILE
[ -e temp_file ] && rm -f temp_file
dd if=/dev/urandom of=temp_file count=2
openssl dhparam -rand temp_file 512 >> $PEMFILE
ln -sf $PEMFILE `openssl x509 -noout -hash < $PEMFILE`.0
 
  • даем права на исполнение - только для root:
chmod 0700 /etc/stunnel/create-sert
  • запускаем скрипт и отвечаем на вопросы..
/etc/stunnel/create-sert
  • создаем каталог в котором будет файл запуска .pid
mkdir -p /var/run/stunnel4/
  • копируем из примера будущий конфигурационный файл для stunnel4
cp /usr/share/doc/stunnel4/examples/stunnel.conf-sample /etc/stunnel/stunnel.conf
  • приводим его в такой вариант (рабочий пример):
; Sample stunnel configuration file for Unix by Michal Trojnara 2002-2015
; Some options used here may be inadequate for your particular configuration
; This sample file does *not* represent stunnel.conf defaults
; Please consult the manual for detailed description of available options

; **************************************************************************
; * Global options                                                         *
; **************************************************************************

; It is recommended to drop root privileges if stunnel is started by root
;setuid = stunnel4
;setgid = stunnel4

; PID file is created inside the chroot jail (if enabled)
pid = /var/run/stunnel4/stunnel.pid

; Debugging stuff (may be useful for troubleshooting)
;foreground = yes
;debug = info
output = /var/log/stunnel.log

; Enable FIPS 140-2 mode if needed for compliance
;fips = yes
fips = no
; **************************************************************************
; * Service defaults may also be specified in individual service sections  *
; **************************************************************************

; Enable support for the insecure SSLv3 protocol
options = -NO_SSLv3
sslVersion = TLSv1.2

; These options provide additional security at some performance degradation
;options = SINGLE_ECDH_USE
;options = SINGLE_DH_USE

; **************************************************************************
; * Include all configuration file fragments from the specified folder     *
; **************************************************************************

;include = /etc/stunnel/conf.d

; **************************************************************************
; * Service definitions (remove all services for inetd mode)               *
; **************************************************************************

; ***************************************** Example TLS client mode services

; The following examples use /etc/ssl/certs, which is the common location
; of a hashed directory containing trusted CA certificates.  This is not
; a hardcoded path of the stunnel package, as it is not related to the
; stunnel configuration in /etc/stunnel/.

;[mymail-pop3]
;client = yes
;accept = 127.0.0.1:110
;connect = pop3.mymail.ru:995
;verifyChain = yes
;CApath = @sysconfdir/ssl/certs
;checkHost = pop3s.mymail.ru
;OCSPaia = yes

;[mymail-imap]
;client = yes
;accept = 127.0.0.1:143
;connect = imap.mymail.ru:993
;verifyChain = yes
;CApath = @sysconfdir/ssl/certs
;checkHost = imaps.mymail.ru
;OCSPaia = yes

;[mymail-smtp]
;client = yes
;accept = 127.0.0.1:25
;connect = smtp.mymail.ru:465
;verifyChain = yes
;CApath = @sysconfdir/ssl/certs
;checkHost = smtps.mymail.ru
;OCSPaia = yes

; ***************************************** Example TLS server mode services

[pop3s]
accept  = 995
connect = 110
cert = /etc/ssl/certs/servername.mymail.ru.pem

[imaps]
accept  = 993
connect = 143
cert = /etc/ssl/certs/servername.mymail.ru.pem

[smtps]
accept  = 465
connect = 25
cert = /etc/ssl/certs/servername.mymail.ru.pem

; TLS front-end to a web server
;[https]
;accept  = 443
;connect = 80
;cert = /etc/stunnel/stunnel.pem
; "TIMEOUTclose = 0" is a workaround for a design flaw in Microsoft SChannel
; Microsoft implementations do not use TLS close-notify alert and thus they
; are vulnerable to truncation attacks
;TIMEOUTclose = 0

; Remote shell protected with PSK-authenticated TLS
; Create "/etc/stunnel/secrets.txt" containing IDENTITY:KEY pairs
;[shell]
;accept = 1337
;exec = /bin/sh
;execArgs = sh -i
;ciphers = PSK
;PSKsecrets = /etc/stunnel/secrets.txt

; Non-standard MySQL-over-TLS encapsulation connecting the Unix socket
;[mysql]
;cert = /etc/stunnel/stunnel.pem
;accept = 3307
;connect = /run/mysqld/mysqld.sock

; vim:ft=dosini
  • корректируем конфигурационный файл запуска по умолчанию:
# /etc/default/stunnel
# Julien LEMOINE <speedblue@debian.org>
# September 2003

# Change to one to enable stunnel automatic startup
ENABLED=1
FILES="/etc/stunnel/*.conf"
OPTIONS=""

# Change to one to enable ppp restart scripts
PPP_RESTART=0

# Change to enable the setting of limits on the stunnel instances
# For example, to set a large limit on file descriptors (to enable
# more simultaneous client connections), set RLIMITS="-n 4096"
# More than one resource limit may be modified at the same time,
# e.g. RLIMITS="-n 4096 -d unlimited"
RLIMITS=""
  • перезапуск stunnel
/etc/init.d/stunnel4 restart
  • после этого проверяем наличие нужных нам портов:
nmap -v mymail.ru
...
PORT    STATE SERVICE
22/tcp  open  ssh
25/tcp  open  smtp
110/tcp open  pop3
143/tcp open  imap
465/tcp open  smtps
993/tcp open  imaps
995/tcp open  pop3s 
  • проверяем работу с почтой по SSL\TLS - зашифрованный пароль на портах 465,993,995
  • если все в порядке, рекомендую закрыть обычные порты через iptables (110,143),
  • а оставить только 25 (некоторые серверы для доставки вам почты требуют именно его)

5. Установка антиспама Spamassassin

  • установка пакета:
aptitude install spamassassin
  • запуск по умолчанию в /etc/default/spamassassin
...
ENABLED=1
...
  • Приводим файл конфигурации антиспама /etc/spamassassin/local.cf к такому:
# This is the right place to customize your installation of SpamAssassin.
#
# See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
# tweaked.
#
# Only a small subset of options are listed below
#
###########################################################################

#   Add *****SPAM***** to the Subject header of spam e-mails
#
rewrite_header Subject *****SPAM*****


#   Save spam messages as a message/rfc822 MIME attachment instead of
#   modifying the original message (0: off, 2: use text/plain instead)
#
report_safe 0


#   Set which networks or hosts are considered 'trusted' by your mail
#   server (i.e. not spammers)
#
# trusted_networks 212.17.35.
trusted_networks 10.0.5.


#   Set file-locking method (flock is not safe over NFS, but is faster)
#
# lock_method flock


#   Set the threshold at which a message is considered spam (default: 5.0)
#
required_score 5.0


#   Use Bayesian classifier (default: 1)
#
use_bayes 1


#   Bayesian classifier auto-learning (default: 1)
#
bayes_auto_learn 1


#   Set headers which may provide inappropriate cues to the Bayesian
#   classifier
#
bayes_ignore_header X-Bogosity
bayes_ignore_header X-Spam-Flag
bayes_ignore_header X-Spam-Status


#   Whether to decode non- UTF-8 and non-ASCII textual parts and recode
#   them to UTF-8 before the text is given over to rules processing.
#
# normalize_charset 1

#   Some shortcircuiting, if the plugin is enabled
# 
ifplugin Mail::SpamAssassin::Plugin::Shortcircuit
#
#   default: strongly-whitelisted mails are *really* whitelisted now, if the
#   shortcircuiting plugin is active, causing early exit to save CPU load.
#   Uncomment to turn this on
#
# shortcircuit USER_IN_WHITELIST       on
# shortcircuit USER_IN_DEF_WHITELIST   on
# shortcircuit USER_IN_ALL_SPAM_TO     on
# shortcircuit SUBJECT_IN_WHITELIST    on

#   the opposite; blacklisted mails can also save CPU
#
# shortcircuit USER_IN_BLACKLIST       on
# shortcircuit USER_IN_BLACKLIST_TO    on
# shortcircuit SUBJECT_IN_BLACKLIST    on

#   if you have taken the time to correctly specify your "trusted_networks",
#   this is another good way to save CPU
#
# shortcircuit ALL_TRUSTED             on

#   and a well-trained bayes DB can save running rules, too
#
# shortcircuit BAYES_99                spam
# shortcircuit BAYES_00                ham
whitelist_from @mymail.ru

endif # Mail::SpamAssassin::Plugin::Shortcircuit

  • Стартуем spamassasin:
/etc/init.d/spamassassin start 
  • Редактируем файл постфикса /etc/postfix/master.cf

- Строку:

..
smtp      inet  n       -       -       -       -       smtpd
..

- Заменяем на:

..
smtp      inet  n       -       -       -       -       smtpd -o content_filter=spamassassin
..

- Перед:

..
dbmail-lmtp     unix    -       -       n       -       -       lmtp
        -o disable_dns_lookups=yes
..

- Добавляем:

..
spamassassin unix   -   n   n   -   -   pipe  user=debian-spamd argv=/usr/bin/spamc -s 5120000 -f -e /usr/sbin/sendmail -oi -f
${sender}${recipient}
..
  • Перезапускаем postfix:
/etc/init.d/postfix restart
  • Проверяем работу почты, все должно работать...



Источники: