Node.js v0.10.1 Мануал

Автоматизациия для полследующих редакций
1 Этап. 
Сохраненная веб страница очищена от примечаний и картинок в libreoffice 4.0.1 и опубликована здесь 
2 Этап.
для автоматизации разметки и удаления лишних ссылок использоан Geany 
для поиска строк типа: = About this Documentation[http://nodejs.org/api/all.html#all_about_this_documentation #] =
и для замены: [http://nodejs.org/api/all.html#all_about_this_documentation #] =
на:  =
использовано регулярное выражение \[http.*\#*\]\s\=
3 Этап

About this Documentation

The goal of this documentation is to comprehensively explain the Node.js API, both from a reference as well as a conceptual point of view. Each section describes a built-in module or high-level concept.

Where appropriate, property types, method arguments, and the arguments provided to event handlers are detailed in a list underneath the topic heading.

Every .html document has a corresponding .json document presenting the same information in a structured manner. This feature is experimental, and added for the benefit of IDEs and other utilities that wish to do programmatic things with the documentation.

Every .html and .json file is generated based on the corresponding .markdown file in the doc/api/ folder in node's source tree. The documentation is generated using the tools/doc/generate.js program. The HTML template is located at doc/template.html.

Stability Index

Throughout the documentation, you will see indications of a section's stability. The Node.js API is still somewhat changing, and as it matures, certain parts are more reliable than others. Some are so proven, and so relied upon, that they are unlikely to ever change at all. Others are brand new and experimental, or known to be hazardous and in the process of being redesigned.

The stability indices are as follows:

Stability: 0 - Deprecated

This feature is known to be problematic, and changes are

planned. Do not rely on it. Use of the feature may cause warnings. Backwards

compatibility should not be expected.

Stability: 1 - Experimental

This feature was introduced recently, and may change or be removed in future versions. Please try it out and provide feedback.

If it addresses a use-case that is important to you, tell the node core team.

Stability: 2 - Unstable

The API is in the process of settling, but has not yet had sufficient real-world testing to be considered stable. Backwards-compatibility will be maintained if reasonable.

Stability: 3 - Stable

The API has proven satisfactory, but cleanup in the underlying code may cause minor changes. Backwards-compatibility is guaranteed.

Stability: 4 - API Frozen

This API has been tested extensively in production and is unlikely to ever have to change.

Stability: 5 - Locked

Unless serious bugs are found, this code will not ever change. Please do not suggest changes in this area; they will be refused.

JSON Output

Stability: 1 - Experimental

Every HTML file in the markdown has a corresponding JSON file with the same data.

This feature is new as of node v0.6.12. It is experimental.

Synopsis

An example of a web server written with Node which responds with 'Hello World':

var http = require('http');

http.createServer(function (request, response) {

response.writeHead(200, {'Content-Type': 'text/plain'});

response.end('Hello World\n');

}).listen(8124);


console.log('Server running at http://127.0.0.1:8124/');

To run the server, put the code into a file called example.js and execute it with the node program

 > node example.js

Server running at http://127.0.0.1:8124/

All of the examples in the documentation can be run similarly.

Global Objects

These objects are available in all modules. Some of these objects aren't actually in the global scope but in the module scope - this will be noted.

global

• {Object} The global namespace object.

In browsers, the top-level scope is the global scope. That means that in browsers if you're in the global scope var something will define a global variable. In Node this is different. The top-level scope is not the global scope; var something inside a Node module will be local to that module.

process

• {Object}

The process object. See the process object section.

console

• {Object}

Used to print to stdout and stderr. See the stdio section.

Class: Buffer

• {Function}

Used to handle binary data. See the buffer section

require()

• {Function}

To require modules. See the Modules section. require isn't actually a global but rather local to each module.

require.resolve()

Use the internal require() machinery to look up the location of a module, but rather than loading the module, just return the resolved filename.

require.cache

• Object

Modules are cached in this object when they are required. By deleting a key value from this object, the next require will reload the module.

require.extensions

• Array

Instruct require on how to handle certain file extensions.

Process files with the extension .sjs as .js:

require.extensions['.sjs'] = require.extensions['.js'];

__filename

• {String}

The filename of the code being executed. This is the resolved absolute path of this code file. For a main program this is not necessarily the same filename used in the command line. The value inside a module is the path to that module file.

Example: running node example.js from /Users/mjr

console.log(__filename);

// /Users/mjr/example.js

__filename isn't actually a global but rather local to each module.

__dirname

• {String}

The name of the directory that the currently executing script resides in.

Example: running node example.js from /Users/mjr

console.log(__dirname);

// /Users/mjr

__dirname isn't actually a global but rather local to each module.

module

• {Object}

A reference to the current module. In particular module.exports is the same as the exports object. module isn't actually a global but rather local to each module.

See the module system documentation for more information.

exports

An object which is shared between all instances of the current module and made accessible through require(). exports is the same as the module.exports object. exports isn't actually a global but rather local to each module.

See the module system documentation for more information.

See the module section for more information.

setTimeout(cb, ms)

Run callback cb after at least ms milliseconds. The actual delay depends on external factors like OS timer granularity and system load.

The timeout must be in the range of 1-2,147,483,647 inclusive. If the value is outside that range, it's changed to 1 millisecond. Broadly speaking, a timer cannot span more than 24.8 days.

Returns an opaque value that represents the timer.

clearTimeout(t)

Stop a timer that was previously created with setTimeout(). The callback will not execute.

setInterval(cb, ms)

Run callback cb repeatedly every ms milliseconds. Note that the actual interval may vary, depending on external factors like OS timer granularity and system load. It's never less than ms but it may be longer.

The interval must be in the range of 1-2,147,483,647 inclusive. If the value is outside that range, it's changed to 1 millisecond. Broadly speaking, a timer cannot span more than 24.8 days.

Returns an opaque value that represents the timer.

clearInterval(t)

Stop a timer that was previously created with setInterval(). The callback will not execute.

The timer functions are global variables. See the timers section.

console

Stability: 4 - API Frozen

• Object

For printing to stdout and stderr. Similar to the console object functions provided by most web browsers, here the output is sent to stdout or stderr.

console.log([data], [...])

Prints to stdout with newline. This function can take multiple arguments in a printf()-like way. Example:

console.log('count: %d', count);

If formatting elements are not found in the first string then util.inspect is used on each argument. See util.format for more information.

console.info([data], [...])

Same as console.log.

console.error([data], [...])

Same as console.log but prints to stderr.

console.warn([data], [...])

Same as console.error.

console.dir(obj)

Uses util.inspect on obj and prints resulting string to stdout.

console.time(label)

Mark a time.

console.timeEnd(label)

Finish timer, record output. Example:

console.time('100-elements');

for (var i = 0; i < 100; i++) {

;

}

console.timeEnd('100-elements');

console.trace(label)

Print a stack trace to stderr of the current position.

console.assert(expression, [message])

Same as assert.ok() where if the expression evaluates as false throw an AssertionError with message.

Timers

Stability: 5 - Locked

All of the timer functions are globals. You do not need to require() this module in order to use them.

setTimeout(callback, delay, [arg], [...])

To schedule execution of a one-time callback after delay milliseconds. Returns a timeoutId for possible use with clearTimeout(). Optionally you can also pass arguments to the callback.

It is important to note that your callback will probably not be called in exactly delay milliseconds - Node.js makes no guarantees about the exact timing of when the callback will fire, nor of the ordering things will fire in. The callback will be called as close as possible to the time specified.

clearTimeout(timeoutId)

Prevents a timeout from triggering.

setInterval(callback, delay, [arg], [...])

To schedule the repeated execution of callback every delay milliseconds. Returns a intervalId for possible use with clearInterval(). Optionally you can also pass arguments to the callback.

clearInterval(intervalId)

Stops a interval from triggering.

unref()

The opaque value returned by setTimeout and setInterval also has the method timer.unref() which will allow you to create a timer that is active but if it is the only item left in the event loop won't keep the program running. If the timer is already unrefd calling unref again will have no effect.

In the case of setTimeout when you unref you create a separate timer that will wakeup the event loop, creating too many of these may adversely effect event loop performance -- use wisely.

ref()

If you had previously unref()d a timer you can call ref() to explicitly request the timer hold the program open. If the timer is already refd calling ref again will have no effect.

setImmediate(callback, [arg], [...])

To schedule the "immediate" execution of callback after I/O events callbacks and before setTimeout and setInterval . Returns an immediateId for possible use with clearImmediate(). Optionally you can also pass arguments to the callback.

Immediates are queued in the order created, and are popped off the queue once per loop iteration. This is different from process.nextTick which will execute process.maxTickDepth queued callbacks per iteration. setImmediate will yield to the event loop after firing a queued callback to make sure I/O is not being starved. While order is preserved for execution, other I/O events may fire between any two scheduled immediate callbacks.

clearImmediate(immediateId)

Stops an immediate from triggering.

Modules

Stability: 5 - Locked

Node has a simple module loading system. In Node, files and modules are in one-to-one correspondence. As an example, foo.js loads the module circle.js in the same directory.

The contents of foo.js:

var circle = require('./circle.js');

console.log( 'The area of a circle of radius 4 is '

+ circle.area(4));

The contents of circle.js: 

var PI = Math.PI;


exports.area = function (r) {

return PI * r * r;

};


exports.circumference = function (r) {

return 2 * PI * r;

};

The module circle.js has exported the functions area() and circumference(). To export an object, add to the special exports object.

Variables local to the module will be private. In this example the variable PI is private to circle.js.

The module system is implemented in the require("module") module.

Cycles

When there are circular require() calls, a module might not be done being executed when it is returned.

Consider this situation:

a.js:

console.log('a starting');

exports.done = false;

var b = require('./b.js');

console.log('in a, b.done = %j', b.done);

exports.done = true;

console.log('a done');

b.js:

console.log('b starting');

exports.done = false;

var a = require('./a.js');

console.log('in b, a.done = %j', a.done);

exports.done = true;

console.log('b done');

main.js:

console.log('main starting');

var a = require('./a.js');

var b = require('./b.js');

console.log('in main, a.done=%j, b.done=%j', a.done, b.done);

When main.js loads a.js, then a.js in turn loads b.js. At that point, b.js tries to load a.js. In order to prevent an infinite loop an unfinished copy of the a.js exports object is returned to the b.js module. b.js then finishes loading, and its exports object is provided to the a.js module.

By the time main.js has loaded both modules, they're both finished. The output of this program would thus be:

$ node main.js

main starting

a starting

b starting

in b, a.done = false

b done

in a, b.done = true

a done

in main, a.done=true, b.done=true

If you have cyclic module dependencies in your program, make sure to plan accordingly.

Core Modules

Node has several modules compiled into the binary. These modules are described in greater detail elsewhere in this documentation.

The core modules are defined in node's source in the lib/ folder.

Core modules are always preferentially loaded if their identifier is passed to require(). For instance, require('http') will always return the built in HTTP module, even if there is a file by that name.

File Modules

If the exact filename is not found, then node will attempt to load the required filename with the added extension of .js, .json, and then .node.

.js files are interpreted as JavaScript text files, and .json files are parsed as JSON text files. .node files are interpreted as compiled addon modules loaded with dlopen.

A module prefixed with '/' is an absolute path to the file. For example, require('/home/marco/foo.js') will load the file at /home/marco/foo.js.

A module prefixed with './' is relative to the file calling require(). That is, circle.js must be in the same directory as foo.js for require('./circle') to find it.

Without a leading '/' or './' to indicate a file, the module is either a "core module" or is loaded from a node_modules folder.

If the given path does not exist, require() will throw an Error with its code property set to 'MODULE_NOT_FOUND'.

Loading from node_modules Folders

If the module identifier passed to require() is not a native module, and does not begin with '/', '../', or './', then node starts at the parent directory of the current module, and adds /node_modules, and attempts to load the module from that location.

If it is not found there, then it moves to the parent directory, and so on, until the root of the tree is reached.

For example, if the file at '/home/ry/projects/foo.js' called require('bar.js'), then node would look in the following locations, in this order:

• /home/ry/projects/node_modules/bar.js
• /home/ry/node_modules/bar.js
• /home/node_modules/bar.js
• /node_modules/bar.js

This allows programs to localize their dependencies, so that they do not clash.

Folders as Modules

It is convenient to organize programs and libraries into self-contained directories, and then provide a single entry point to that library. There are three ways in which a folder may be passed to require() as an argument.

The first is to create a package.json file in the root of the folder, which specifies a main module. An example package.json file might look like this:

{ "name" : "some-library",

"main" : "./lib/some-library.js" }

If this was in a folder at ./some-library, then require('./some-library') would attempt to load ./some-library/lib/some-library.js.

This is the extent of Node's awareness of package.json files.

If there is no package.json file present in the directory, then node will attempt to load an index.js or index.node file out of that directory. For example, if there was no package.json file in the above example, then require('./some-library') would attempt to load:

• ./some-library/index.js
• ./some-library/index.node

Caching

Modules are cached after the first time they are loaded. This means (among other things) that every call to require('foo') will get exactly the same object returned, if it would resolve to the same file.

Multiple calls to require('foo') may not cause the module code to be executed multiple times. This is an important feature. With it, "partially done" objects can be returned, thus allowing transitive dependencies to be loaded even when they would cause cycles.

If you want to have a module execute code multiple times, then export a function, and call that function.

Module Caching Caveats

Modules are cached based on their resolved filename. Since modules may resolve to a different filename based on the location of the calling module (loading from node_modules folders), it is not a guarantee that require('foo') will always return the exact same object, if it would resolve to different files.

The module Object

• {Object}

In each module, the module free variable is a reference to the object representing the current module. In particular module.exports is the same as the exports object. module isn't actually a global but rather local to each module.

module.exports

• Object

The exports object is created by the Module system. Sometimes this is not acceptable, many want their module to be an instance of some class. To do this assign the desired export object to module.exports. For example suppose we were making a module called a.js

var EventEmitter = require('events').EventEmitter;

module.exports = new EventEmitter();

// Do some work, and after some time emit

// the 'ready' event from the module itself.

setTimeout(function() {

module.exports.emit('ready');

}, 1000);

Then in another file we could do

var a = require('./a');

a.on('ready', function() {

console.log('module a is ready');

});

Note that assignment to module.exports must be done immediately. It cannot be done in any callbacks. This does not work:

x.js:

setTimeout(function() {

module.exports = { a: "hello" };

}, 0);

y.js:

var x = require('./x');

console.log(x.a);

module.require(id)

• id String
• Return: Object exports from the resolved module

The module.require method provides a way to load a module as if require() was called from the original module.

Note that in order to do this, you must get a reference to the module object. Since require() returns the exports, and the module is typically only available within a specific module's code, it must be explicitly exported in order to be used.

module.id

• String

The identifier for the module. Typically this is the fully resolved filename.

module.filename

• String

The fully resolved filename to the module.

module.loaded

• Boolean

Whether or not the module is done loading, or is in the process of loading.

module.parent

• Module Object

The module that required this one.

module.children

• Array

The module objects required by this one.

All Together...

To get the exact filename that will be loaded when require() is called, use the require.resolve() function.

Putting together all of the above, here is the high-level algorithm in pseudocode of what require.resolve does:

require(X) from module at path Y

1. If X is a core module,

a. return the core module

b. STOP

2. If X begins with './' or '/' or '../'

a. LOAD_AS_FILE(Y + X)

b. LOAD_AS_DIRECTORY(Y + X)

3. LOAD_NODE_MODULES(X, dirname(Y))

4. THROW "not found"

LOAD_AS_FILE(X)

1. If X is a file, load X as JavaScript text. STOP

2. If X.js is a file, load X.js as JavaScript text. STOP

3. If X.node is a file, load X.node as binary addon. STOP

LOAD_AS_DIRECTORY(X)

1. If X/package.json is a file,

a. Parse X/package.json, and look for "main" field.

b. let M = X + (json main field)

c. LOAD_AS_FILE(M)

2. If X/index.js is a file, load X/index.js as JavaScript text. STOP

3. If X/index.node is a file, load X/index.node as binary addon. STOP

LOAD_NODE_MODULES(X, START)

1. let DIRS=NODE_MODULES_PATHS(START)

2. for each DIR in DIRS:

a. LOAD_AS_FILE(DIR/X)

b. LOAD_AS_DIRECTORY(DIR/X)

NODE_MODULES_PATHS(START)

1. let PARTS = path split(START)

2. let ROOT = index of first instance of "node_modules" in PARTS, or 0

3. let I = count of PARTS - 1

4. let DIRS = []

5. while I > ROOT,

a. if PARTS[I] = "node_modules" CONTINUE

c. DIR = path join(PARTS[0 .. I] + "node_modules")

b. DIRS = DIRS + DIR

c. let I = I - 1

6. return DIRS

Loading from the global folders

If the NODE_PATH environment variable is set to a colon-delimited list of absolute paths, then node will search those paths for modules if they are not found elsewhere. (Note: On Windows, NODE_PATH is delimited by semicolons instead of colons.)

Additionally, node will search in the following locations:

• 1: $HOME/.node_modules
• 2: $HOME/.node_libraries
• 3: $PREFIX/lib/node

Where $HOME is the user's home directory, and $PREFIX is node's configured node_prefix.

These are mostly for historic reasons. You are highly encouraged to place your dependencies locally in node_modules folders. They will be loaded faster, and more reliably.

Accessing the main module

When a file is run directly from Node, require.main is set to its module. That means that you can determine whether a file has been run directly by testing

require.main === module

For a file foo.js, this will be true if run via node foo.js, but false if run by require('./foo').

Because module provides a filename property (normally equivalent to __filename), the entry point of the current application can be obtained by checking require.main.filename.

Addenda: Package Manager Tips

The semantics of Node's require() function were designed to be general enough to support a number of sane directory structures. Package manager programs such as dpkg, rpm, and npm will hopefully find it possible to build native packages from Node modules without modification.

Below we give a suggested directory structure that could work:

Let's say that we wanted to have the folder at /usr/lib/node/<some-package>/<some-version> hold the contents of a specific version of a package.

Packages can depend on one another. In order to install package foo, you may have to install a specific version of package bar. The bar package may itself have dependencies, and in some cases, these dependencies may even collide or form cycles.

Since Node looks up the realpath of any modules it loads (that is, resolves symlinks), and then looks for their dependencies in the node_modules folders as described above, this situation is very simple to resolve with the following architecture:

• /usr/lib/node/foo/1.2.3/ - Contents of the foo package, version 1.2.3.
• /usr/lib/node/bar/4.3.2/ - Contents of the bar package that foo depends on.
• /usr/lib/node/foo/1.2.3/node_modules/bar - Symbolic link to /usr/lib/node/bar/4.3.2/.
• /usr/lib/node/bar/4.3.2/node_modules/* - Symbolic links to the packages that bar depends on.

Thus, even if a cycle is encountered, or if there are dependency conflicts, every module will be able to get a version of its dependency that it can use.

When the code in the foo package does require('bar'), it will get the version that is symlinked into /usr/lib/node/foo/1.2.3/node_modules/bar. Then, when the code in the bar package calls require('quux'), it'll get the version that is symlinked into /usr/lib/node/bar/4.3.2/node_modules/quux.

Furthermore, to make the module lookup process even more optimal, rather than putting packages directly in /usr/lib/node, we could put them in /usr/lib/node_modules/<name>/<version>. Then node will not bother looking for missing dependencies in /usr/node_modules or /node_modules.

In order to make modules available to the node REPL, it might be useful to also add the /usr/lib/node_modules folder to the $NODE_PATH environment variable. Since the module lookups using node_modules folders are all relative, and based on the real path of the files making the calls to require(), the packages themselves can be anywhere.

Addons

Addons are dynamically linked shared objects. They can provide glue to C and C++ libraries. The API (at the moment) is rather complex, involving knowledge of several libraries:

• V8 JavaScript, a C++ library. Used for interfacing with JavaScript: creating objects, calling functions, etc. Documented mostly in the v8.h header file (deps/v8/include/v8.h in the Node source tree), which is also available online.
• libuv, C event loop library. Anytime one needs to wait for a file descriptor to become readable, wait for a timer, or wait for a signal to received one will need to interface with libuv. That is, if you perform any I/O, libuv will need to be used.
• Internal Node libraries. Most importantly is the node::ObjectWrap class which you will likely want to derive from.
• Others. Look in deps/ for what else is available.

Node statically compiles all its dependencies into the executable. When compiling your module, you don't need to worry about linking to any of these libraries.

All of the following examples are available for download and may be used as a starting-point for your own Addon.

Hello world

To get started let's make a small Addon which is the C++ equivalent of the following JavaScript code:

module.exports.hello = function() { return 'world'; };

First we create a file hello.cc:

#include <node.h>

#include <v8.h>

using namespace v8;

Handle<Value> Method(const Arguments& args) {

HandleScope scope;

return scope.Close(String::New("world"));

}

void init(Handle<Object> exports) {

exports->Set(String::NewSymbol("hello"),

FunctionTemplate::New(Method)->GetFunction());

}

NODE_MODULE(hello, init)

Note that all Node addons must export an initialization function:

void Initialize (Handle<Object> exports);

NODE_MODULE(module_name, Initialize)

There is no semi-colon after NODE_MODULE as it's not a function (see node.h).

The module_name needs to match the filename of the final binary (minus the .node suffix).

The source code needs to be built into hello.node, the binary Addon. To do this we create a file called binding.gyp which describes the configuration to build your module in a JSON-like format. This file gets compiled by node-gyp.

{

"targets": [

{

"target_name": "hello",

"sources": [ "hello.cc" ]

}

]

}

The next step is to generate the appropriate project build files for the current platform. Use node-gyp configure for that.

Now you will have either a Makefile (on Unix platforms) or a vcxproj file (on Windows) in the build/ directory. Next invoke the node-gyp build command.

Now you have your compiled .node bindings file! The compiled bindings end up in build/Release/.

You can now use the binary addon in a Node project hello.js by pointing require to the recently built hello.node module:

var addon = require('./build/Release/hello');

console.log(addon.hello()); // 'world'

Please see patterns below for further information or

https://github.com/arturadib/node-qt for an example in production.

Addon patterns

Below are some addon patterns to help you get started. Consult the online v8 reference for help with the various v8 calls, and v8's Embedder's Guide for an explanation of several concepts used such as handles, scopes, function templates, etc.

In order to use these examples you need to compile them using node-gyp. Create the following binding.gyp file:

{

"targets": [

{

"target_name": "addon",

"sources": [ "addon.cc" ]

}

]

}

In cases where there is more than one .cc file, simply add the file name to the sources array, e.g.:

"sources": ["addon.cc", "myexample.cc"]

Now that you have your binding.gyp ready, you can configure and build the addon:

$ node-gyp configure build

Function arguments

The following pattern illustrates how to read arguments from JavaScript function calls and return a result. This is the main and only needed source addon.cc:

#define BUILDING_NODE_EXTENSION

#include <node.h>

using namespace v8;

Handle<Value> Add(const Arguments& args) {

HandleScope scope;

if (args.Length() < 2) {

ThrowException(Exception::TypeError(String::New("Wrong number of arguments")));

return scope.Close(Undefined());

}

if (!args[0]->IsNumber() || !args[1]->IsNumber()) {

ThrowException(Exception::TypeError(String::New("Wrong arguments")));

return scope.Close(Undefined());

}

Local<Number> num = Number::New(args[0]->NumberValue() +

args[1]->NumberValue());

return scope.Close(num);

}

void Init(Handle<Object> exports) {

exports->Set(String::NewSymbol("add"),

FunctionTemplate::New(Add)->GetFunction());

}

NODE_MODULE(addon, Init)

You can test it with the following JavaScript snippet:

var addon = require('./build/Release/addon');

console.log( 'This should be eight:', addon.add(3,5) );

Callbacks

You can pass JavaScript functions to a C++ function and execute them from there. Here's addon.cc:

#define BUILDING_NODE_EXTENSION

#include <node.h>

using namespace v8;

Handle<Value> RunCallback(const Arguments& args) {

HandleScope scope;

Local<Function> cb = Local<Function>::Cast(args[0]);

const unsigned argc = 1;

Local<Value> argv[argc] = { Local<Value>::New(String::New("hello world")) };

cb->Call(Context::GetCurrent()->Global(), argc, argv);

return scope.Close(Undefined());

}

void Init(Handle<Object> exports, Handle<Object> module) {

module->Set(String::NewSymbol("exports"),

FunctionTemplate::New(RunCallback)->GetFunction());

}

NODE_MODULE(addon, Init)

Note that this example uses a two-argument form of Init() that receives the full module object as the second argument. This allows the addon to completely overwrite exports with a single function instead of adding the function as a property of exports.

To test it run the following JavaScript snippet:

var addon = require('./build/Release/addon');

addon(function(msg){

console.log(msg); // 'hello world'

});

Object factory

You can create and return new objects from within a C++ function with this addon.cc pattern, which returns an object with property msg that echoes the string passed to createObject():

#define BUILDING_NODE_EXTENSION

#include <node.h>

using namespace v8;

Handle<Value> CreateObject(const Arguments& args) {

HandleScope scope;

Local<Object> obj = Object::New();

obj->Set(String::NewSymbol("msg"), args[0]->ToString());

return scope.Close(obj);

}

void Init(Handle<Object> exports, Handle<Object> module) {

module->Set(String::NewSymbol("exports"),

FunctionTemplate::New(CreateObject)->GetFunction());

}

NODE_MODULE(addon, Init)

To test it in JavaScript:

var addon = require('./build/Release/addon');

var obj1 = addon('hello');

var obj2 = addon('world');

console.log(obj1.msg+' '+obj2.msg); // 'hello world'

Function factory

This pattern illustrates how to create and return a JavaScript function that wraps a C++ function:

#define BUILDING_NODE_EXTENSION

#include <node.h>

using namespace v8;

Handle<Value> MyFunction(const Arguments& args) {

HandleScope scope;

return scope.Close(String::New("hello world"));

}

Handle<Value> CreateFunction(const Arguments& args) {

HandleScope scope;

Local<FunctionTemplate> tpl = FunctionTemplate::New(MyFunction);

Local<Function> fn = tpl->GetFunction();

fn->SetName(String::NewSymbol("theFunction")); // omit this to make it anonymous

return scope.Close(fn);

}

void Init(Handle<Object> exports, Handle<Object> module) {

module->Set(String::NewSymbol("exports"),

FunctionTemplate::New(CreateFunction)->GetFunction());

}

NODE_MODULE(addon, Init)

To test:

var addon = require('./build/Release/addon');

var fn = addon();

console.log(fn()); // 'hello world'

Wrapping C++ objects

Here we will create a wrapper for a C++ object/class MyObject that can be instantiated in JavaScript through the new operator. First prepare the main module addon.cc:

#define BUILDING_NODE_EXTENSION

#include <node.h>

#include "myobject.h"

using namespace v8;

void InitAll(Handle<Object> exports) {

MyObject::Init(exports);

}

NODE_MODULE(addon, InitAll)

Then in myobject.h make your wrapper inherit from node::ObjectWrap:

#ifndef MYOBJECT_H

#define MYOBJECT_H

#include <node.h>

class MyObject : public node::ObjectWrap {

public:

static void Init(v8::Handle<v8::Object> exports);

private:

MyObject();

~MyObject();

static v8::Handle<v8::Value> New(const v8::Arguments& args);

static v8::Handle<v8::Value> PlusOne(const v8::Arguments& args);

double counter_;

};

#endif

And in myobject.cc implement the various methods that you want to expose. Here we expose the method plusOne by adding it to the constructor's prototype:

#define BUILDING_NODE_EXTENSION

#include <node.h>

#include "myobject.h"

using namespace v8;

MyObject::MyObject() {};

MyObject::~MyObject() {};

void MyObject::Init(Handle<Object> exports) {

// Prepare constructor template

Local<FunctionTemplate> tpl = FunctionTemplate::New(New);

tpl->SetClassName(String::NewSymbol("MyObject"));

tpl->InstanceTemplate()->SetInternalFieldCount(1);

// Prototype

tpl->PrototypeTemplate()->Set(String::NewSymbol("plusOne"),

FunctionTemplate::New(PlusOne)->GetFunction());

Persistent<Function> constructor = Persistent<Function>::New(tpl->GetFunction());

exports->Set(String::NewSymbol("MyObject"), constructor);

}

Handle<Value> MyObject::New(const Arguments& args) {

HandleScope scope;

MyObject* obj = new MyObject();

obj->counter_ = args[0]->IsUndefined() ? 0 : args[0]->NumberValue();

obj->Wrap(args.This());

return args.This();

}

Handle<Value> MyObject::PlusOne(const Arguments& args) {

HandleScope scope;

MyObject* obj = ObjectWrap::Unwrap<MyObject>(args.This());

obj->counter_ += 1;

return scope.Close(Number::New(obj->counter_));

}

Test it with:

var addon = require('./build/Release/addon');

var obj = new addon.MyObject(10);

console.log( obj.plusOne() ); // 11

console.log( obj.plusOne() ); // 12

console.log( obj.plusOne() ); // 13

Factory of wrapped objects

This is useful when you want to be able to create native objects without explicitly instantiating them with the new operator in JavaScript, e.g.

var obj = addon.createObject();

// instead of:

// var obj = new addon.Object();

Let's register our createObject method in addon.cc:

#define BUILDING_NODE_EXTENSION

#include <node.h>

#include "myobject.h"

using namespace v8;

Handle<Value> CreateObject(const Arguments& args) {

HandleScope scope;

return scope.Close(MyObject::NewInstance(args));

}

void InitAll(Handle<Object> exports, Handle<Object> module) {

MyObject::Init();

module->Set(String::NewSymbol("exports"),

FunctionTemplate::New(CreateObject)->GetFunction());

}

NODE_MODULE(addon, InitAll)

In myobject.h we now introduce the static method NewInstance that takes care of instantiating the object (i.e. it does the job of new in JavaScript):

#define BUILDING_NODE_EXTENSION

#ifndef MYOBJECT_H

#define MYOBJECT_H

#include <node.h>

class MyObject : public node::ObjectWrap {

public:

static void Init();

static v8::Handle<v8::Value> NewInstance(const v8::Arguments& args);

private:

MyObject();

~MyObject();

static v8::Persistent<v8::Function> constructor;

static v8::Handle<v8::Value> New(const v8::Arguments& args);

static v8::Handle<v8::Value> PlusOne(const v8::Arguments& args);

double counter_;

};

#endif

The implementation is similar to the above in myobject.cc:

#define BUILDING_NODE_EXTENSION

#include <node.h>

#include "myobject.h"

using namespace v8;

MyObject::MyObject() {};

MyObject::~MyObject() {};

Persistent<Function> MyObject::constructor;

void MyObject::Init() {

// Prepare constructor template

Local<FunctionTemplate> tpl = FunctionTemplate::New(New);

tpl->SetClassName(String::NewSymbol("MyObject"));

tpl->InstanceTemplate()->SetInternalFieldCount(1);

// Prototype

tpl->PrototypeTemplate()->Set(String::NewSymbol("plusOne"),

FunctionTemplate::New(PlusOne)->GetFunction());

constructor = Persistent<Function>::New(tpl->GetFunction());

}

Handle<Value> MyObject::New(const Arguments& args) {

HandleScope scope;

MyObject* obj = new MyObject();

obj->counter_ = args[0]->IsUndefined() ? 0 : args[0]->NumberValue();

obj->Wrap(args.This());

return args.This();

}

Handle<Value> MyObject::NewInstance(const Arguments& args) {

HandleScope scope;

const unsigned argc = 1;

Handle<Value> argv[argc] = { args[0] };

Local<Object> instance = constructor->NewInstance(argc, argv);

return scope.Close(instance);

}

Handle<Value> MyObject::PlusOne(const Arguments& args) {

HandleScope scope;

MyObject* obj = ObjectWrap::Unwrap<MyObject>(args.This());

obj->counter_ += 1;

return scope.Close(Number::New(obj->counter_));

}

Test it with:

var createObject = require('./build/Release/addon');

var obj = createObject(10);

console.log( obj.plusOne() ); // 11

console.log( obj.plusOne() ); // 12

console.log( obj.plusOne() ); // 13

var obj2 = createObject(20);

console.log( obj2.plusOne() ); // 21

console.log( obj2.plusOne() ); // 22

console.log( obj2.plusOne() ); // 23

Passing wrapped objects around

In addition to wrapping and returning C++ objects, you can pass them around by unwrapping them with Node's node::ObjectWrap::Unwrap helper function. In the following addon.cc we introduce a function add() that can take on two MyObject objects:

#define BUILDING_NODE_EXTENSION

#include <node.h>

#include "myobject.h"

using namespace v8;

Handle<Value> CreateObject(const Arguments& args) {

HandleScope scope;

return scope.Close(MyObject::NewInstance(args));

}

Handle<Value> Add(const Arguments& args) {

HandleScope scope;

MyObject* obj1 = node::ObjectWrap::Unwrap<MyObject>(

args[0]->ToObject());

MyObject* obj2 = node::ObjectWrap::Unwrap<MyObject>(

args[1]->ToObject());

double sum = obj1->Val() + obj2->Val();

return scope.Close(Number::New(sum));

}

void InitAll(Handle<Object> exports) {

MyObject::Init();

exports->Set(String::NewSymbol("createObject"),

FunctionTemplate::New(CreateObject)->GetFunction());

exports->Set(String::NewSymbol("add"),

FunctionTemplate::New(Add)->GetFunction());

}

NODE_MODULE(addon, InitAll)

To make things interesting we introduce a public method in myobject.h so we can probe private values after unwrapping the object:

#define BUILDING_NODE_EXTENSION

#ifndef MYOBJECT_H

#define MYOBJECT_H

#include <node.h>

class MyObject : public node::ObjectWrap {

public:

static void Init();

static v8::Handle<v8::Value> NewInstance(const v8::Arguments& args);

double Val() const { return val_; }

private:

MyObject();

~MyObject();

static v8::Persistent<v8::Function> constructor;

static v8::Handle<v8::Value> New(const v8::Arguments& args);

double val_;

};

#endif

The implementation of myobject.cc is similar as before:

#define BUILDING_NODE_EXTENSION

#include <node.h>

#include "myobject.h"

using namespace v8;

MyObject::MyObject() {};

MyObject::~MyObject() {};

Persistent<Function> MyObject::constructor;

void MyObject::Init() {

// Prepare constructor template

Local<FunctionTemplate> tpl = FunctionTemplate::New(New);

tpl->SetClassName(String::NewSymbol("MyObject"));

tpl->InstanceTemplate()->SetInternalFieldCount(1);

constructor = Persistent<Function>::New(tpl->GetFunction());

}

Handle<Value> MyObject::New(const Arguments& args) {

HandleScope scope;

MyObject* obj = new MyObject();

obj->val_ = args[0]->IsUndefined() ? 0 : args[0]->NumberValue();

obj->Wrap(args.This());

return args.This();

}

Handle<Value> MyObject::NewInstance(const Arguments& args) {

HandleScope scope;

const unsigned argc = 1;

Handle<Value> argv[argc] = { args[0] };

Local<Object> instance = constructor->NewInstance(argc, argv);

return scope.Close(instance);

}

Test it with:

var addon = require('./build/Release/addon');

var obj1 = addon.createObject(10);

var obj2 = addon.createObject(20);

var result = addon.add(obj1, obj2);

console.log(result); // 30

process

The process object is a global object and can be accessed from anywhere. It is an instance of EventEmitter.

Event: 'exit'

Emitted when the process is about to exit. This is a good hook to perform constant time checks of the module's state (like for unit tests). The main event loop will no longer be run after the 'exit' callback finishes, so timers may not be scheduled.

Example of listening for exit:

process.on('exit', function() {

setTimeout(function() {

console.log('This will not run');

}, 0);

console.log('About to exit.');

});

Event: 'uncaughtException'

Emitted when an exception bubbles all the way back to the event loop. If a listener is added for this exception, the default action (which is to print a stack trace and exit) will not occur.

Example of listening for uncaughtException:

process.on('uncaughtException', function(err) {

console.log('Caught exception: ' + err);

});

setTimeout(function() {

console.log('This will still run.');

}, 500);

// Intentionally cause an exception, but don't catch it.

nonexistentFunc();

console.log('This will not run.');

Note that uncaughtException is a very crude mechanism for exception handling and may be removed in the future.

Don't use it, use domains instead. If you do use it, restart your application after every unhandled exception!

Do not use it as the node.js equivalent of On Error Resume Next. An unhandled exception means your application - and by extension node.js itself - is in an undefined state. Blindly resuming means anything could happen.

Think of resuming as pulling the power cord when you are upgrading your system. Nine out of ten times nothing happens - but the 10th time, your system is bust.

You have been warned.

Signal Events

Emitted when the processes receives a signal. See sigaction(2) for a list of standard POSIX signal names such as SIGINT, SIGUSR1, etc.

Example of listening for SIGINT:

// Start reading from stdin so we don't exit.

process.stdin.resume();

process.on('SIGINT', function() {

console.log('Got SIGINT. Press Control-D to exit.');

});

An easy way to send the SIGINT signal is with Control-C in most terminal programs.

process.stdout

A Writable Stream to stdout.

Example: the definition of console.log

console.log = function(d) {

process.stdout.write(d + '\n');

};

process.stderr and process.stdout are unlike other streams in Node in that writes to them are usually blocking. They are blocking in the case that they refer to regular files or TTY file descriptors. In the case they refer to pipes, they are non-blocking like other streams.

process.stderr

A writable stream to stderr.

process.stderr and process.stdout are unlike other streams in Node in that writes to them are usually blocking. They are blocking in the case that they refer to regular files or TTY file descriptors. In the case they refer to pipes, they are non-blocking like other streams.

process.stdin

A Readable Stream for stdin. The stdin stream is paused by default, so one must call process.stdin.resume() to read from it.

Example of opening standard input and listening for both events:

process.stdin.resume();

process.stdin.setEncoding('utf8');

process.stdin.on('data', function(chunk) {

process.stdout.write('data: ' + chunk);

});

process.stdin.on('end', function() {

process.stdout.write('end');

});

process.argv

An array containing the command line arguments. The first element will be 'node', the second element will be the name of the JavaScript file. The next elements will be any additional command line arguments.

// print process.argv

process.argv.forEach(function(val, index, array) {

console.log(index + ': ' + val);

});

This will generate:

$ node process-2.js one two=three four

0: node

1: /Users/mjr/work/node/process-2.js

2: one

3: two=three

4: four

process.execPath

This is the absolute pathname of the executable that started the process.

Example:

/usr/local/bin/node

process.abort()

This causes node to emit an abort. This will cause node to exit and generate a core file.

process.chdir(directory)

Changes the current working directory of the process or throws an exception if that fails.

console.log('Starting directory: ' + process.cwd());

try {

process.chdir('/tmp');

console.log('New directory: ' + process.cwd());

}

catch (err) {

console.log('chdir: ' + err);

}

process.cwd()

Returns the current working directory of the process.

console.log('Current directory: ' + process.cwd());

process.env

An object containing the user environment. See environ(7).

process.exit([code])

Ends the process with the specified code. If omitted, exit uses the 'success' code 0.

To exit with a 'failure' code:

process.exit(1);

The shell that executed node should see the exit code as 1.

process.getgid()

Note: this function is only available on POSIX platforms (i.e. not Windows)

Gets the group identity of the process. (See getgid(2).) This is the numerical group id, not the group name.

if (process.getgid) {

console.log('Current gid: ' + process.getgid());

}

process.setgid(id)

Note: this function is only available on POSIX platforms (i.e. not Windows)

Sets the group identity of the process. (See setgid(2).) This accepts either a numerical ID or a groupname string. If a groupname is specified, this method blocks while resolving it to a numerical ID.

if (process.getgid && process.setgid) {

console.log('Current gid: ' + process.getgid());

try {

process.setgid(501);

console.log('New gid: ' + process.getgid());

}

catch (err) {

console.log('Failed to set gid: ' + err);

}

}

process.getuid()

Note: this function is only available on POSIX platforms (i.e. not Windows)

Gets the user identity of the process. (See getuid(2).) This is the numerical userid, not the username.

if (process.getuid) {

console.log('Current uid: ' + process.getuid());

}

process.setuid(id)

Note: this function is only available on POSIX platforms (i.e. not Windows)

Sets the user identity of the process. (See setuid(2).) This accepts either a numerical ID or a username string. If a username is specified, this method blocks while resolving it to a numerical ID.

if (process.getuid && process.setuid) {

console.log('Current uid: ' + process.getuid());

try {

process.setuid(501);

console.log('New uid: ' + process.getuid());

}

catch (err) {

console.log('Failed to set uid: ' + err);

}

}

process.getgroups()

Note: this function is only available on POSIX platforms (i.e. not Windows)

Returns an array with the supplementary group IDs. POSIX leaves it unspecified if the effective group ID is included but node.js ensures it always is.

process.setgroups(groups)

Note: this function is only available on POSIX platforms (i.e. not Windows)

Sets the supplementary group IDs. This is a privileged operation, meaning you need to be root or have the CAP_SETGID capability.

The list can contain group IDs, group names or both.

process.initgroups(user, extra_group)

Note: this function is only available on POSIX platforms (i.e. not Windows)

Reads /etc/group and initializes the group access list, using all groups of which the user is a member. This is a privileged operation, meaning you need to be root or have the CAP_SETGID capability.

user is a user name or user ID. extra_group is a group name or group ID.

Some care needs to be taken when dropping privileges. Example:

console.log(process.getgroups()); // [ 0 ]

process.initgroups('bnoordhuis', 1000); // switch user

console.log(process.getgroups()); // [ 27, 30, 46, 1000, 0 ]

process.setgid(1000); // drop root gid

console.log(process.getgroups()); // [ 27, 30, 46, 1000 ]

process.version

A compiled-in property that exposes NODE_VERSION.

console.log('Version: ' + process.version);

process.versions

A property exposing version strings of node and its dependencies.

console.log(process.versions);

Will output:

{ node: '0.4.12',

v8: '3.1.8.26',

ares: '1.7.4',

ev: '4.4',

openssl: '1.0.0e-fips' }

process.config

An Object containing the JavaScript representation of the configure options that were used to compile the current node executable. This is the same as the "config.gypi" file that was produced when running the ./configure script.

An example of the possible output looks like:

{ target_defaults:

{ cflags: [],

default_configuration: 'Release',

defines: [],

include_dirs: [],

libraries: [] },

variables:

{ host_arch: 'x64',

node_install_npm: 'true',

node_prefix: ,

node_shared_cares: 'false',

node_shared_http_parser: 'false',

node_shared_libuv: 'false',

node_shared_v8: 'false',

node_shared_zlib: 'false',

node_use_dtrace: 'false',

node_use_openssl: 'true',

node_shared_openssl: 'false',

strict_aliasing: 'true',

target_arch: 'x64',

v8_use_snapshot: 'true' } }

process.kill(pid, [signal])

Send a signal to a process. pid is the process id and signal is the string describing the signal to send. Signal names are strings like 'SIGINT' or 'SIGUSR1'. If omitted, the signal will be 'SIGTERM'. See kill(2) for more information.

Note that just because the name of this function is process.kill, it is really just a signal sender, like the kill system call. The signal sent may do something other than kill the target process.

Example of sending a signal to yourself:

process.on('SIGHUP', function() {

console.log('Got SIGHUP signal.');

});

setTimeout(function() {

console.log('Exiting.');

process.exit(0);

}, 100);

process.kill(process.pid, 'SIGHUP');

process.pid

The PID of the process.

console.log('This process is pid ' + process.pid);

process.title

Getter/setter to set what is displayed in 'ps'.

When used as a setter, the maximum length is platform-specific and probably short.

On Linux and OS X, it's limited to the size of the binary name plus the length of the command line arguments because it overwrites the argv memory.

v0.8 allowed for longer process title strings by also overwriting the environ memory but that was potentially insecure/confusing in some (rather obscure) cases.

process.arch

What processor architecture you're running on: 'arm', 'ia32', or 'x64'.

console.log('This processor architecture is ' + process.arch);

process.platform

What platform you're running on: 'darwin', 'freebsd', 'linux', 'sunos' or 'win32'

console.log('This platform is ' + process.platform);

process.memoryUsage()

Returns an object describing the memory usage of the Node process measured in bytes.

var util = require('util');

console.log(util.inspect(process.memoryUsage()));

This will generate:

{ rss: 4935680,

heapTotal: 1826816,

heapUsed: 650472 }

heapTotal and heapUsed refer to V8's memory usage.

process.nextTick(callback)

On the next loop around the event loop call this callback. This is not a simple alias to setTimeout(fn, 0), it's much more efficient. It typically runs before any other I/O events fire, but there are some exceptions. See process.maxTickDepth below.

process.nextTick(function() {

console.log('nextTick callback');

});

This is important in developing APIs where you want to give the user the chance to assign event handlers after an object has been constructed, but before any I/O has occurred.

function MyThing(options) {

this.setupOptions(options);

process.nextTick(function() {

this.startDoingStuff();

}.bind(this));

}

var thing = new MyThing();

thing.getReadyForStuff();

// thing.startDoingStuff() gets called now, not before.

It is very important for APIs to be either 100% synchronous or 100% asynchronous. Consider this example:

// WARNING! DO NOT USE! BAD UNSAFE HAZARD!

function maybeSync(arg, cb) {

if (arg) {

cb();

return;

}

fs.stat('file', cb);

}

This API is hazardous. If you do this:

maybeSync(true, function() {

foo();

});

bar();

then it's not clear whether foo() or bar() will be called first.

This approach is much better:

function definitelyAsync(arg, cb) {

if (arg) {

process.nextTick(cb);

return;

}

fs.stat('file', cb);

}

process.maxTickDepth

• Number Default = 1000

Callbacks passed to process.nextTick will usually be called at the end of the current flow of execution, and are thus approximately as fast as calling a function synchronously. Left unchecked, this would starve the event loop, preventing any I/O from occurring.

Consider this code:

process.nextTick(function foo() {

process.nextTick(foo);

});

In order to avoid the situation where Node is blocked by an infinite loop of recursive series of nextTick calls, it defers to allow some I/O to be done every so often.

The process.maxTickDepth value is the maximum depth of nextTick-calling nextTick-callbacks that will be evaluated before allowing other forms of I/O to occur.

process.umask([mask])

Sets or reads the process's file mode creation mask. Child processes inherit the mask from the parent process. Returns the old mask if mask argument is given, otherwise returns the current mask.

var oldmask, newmask = 0644;

oldmask = process.umask(newmask);

console.log('Changed umask from: ' + oldmask.toString(8) +

' to ' + newmask.toString(8));

process.uptime()

Number of seconds Node has been running.

process.hrtime()

Returns the current high-resolution real time in a [seconds, nanoseconds] tuple Array. It is relative to an arbitrary time in the past. It is not related to the time of day and therefore not subject to clock drift. The primary use is for measuring performance between intervals.

You may pass in the result of a previous call to process.hrtime() to get a diff reading, useful for benchmarks and measuring intervals:

var time = process.hrtime();

// [ 1800216, 25 ]

setTimeout(function() {

var diff = process.hrtime(time);

// [ 1, 552 ]

console.log('benchmark took %d nanoseconds', diff[0] * 1e9 + diff[1]);

// benchmark took 1000000527 nanoseconds

}, 1000);

util

Stability: 5 - Locked

These functions are in the module 'util'. Use require('util') to access them.

util.format(format, [...])

Returns a formatted string using the first argument as a printf-like format.

The first argument is a string that contains zero or more placeholders. Each placeholder is replaced with the converted value from its corresponding argument. Supported placeholders are:

• %s - String.
• %d - Number (both integer and float).
• %j - JSON.
• % - single percent sign ('%'). This does not consume an argument.

If the placeholder does not have a corresponding argument, the placeholder is not replaced.

util.format('%s:%s', 'foo'); // 'foo:%s'

If there are more arguments than placeholders, the extra arguments are converted to strings with util.inspect() and these strings are concatenated, delimited by a space.

util.format('%s:%s', 'foo', 'bar', 'baz'); // 'foo:bar baz'

If the first argument is not a format string then util.format() returns a string that is the concatenation of all its arguments separated by spaces. Each argument is converted to a string with util.inspect().

util.format(1, 2, 3); // '1 2 3'

util.debug(string)

A synchronous output function. Will block the process and output string immediately to stderr.

require('util').debug('message on stderr');

util.error([...])

Same as util.debug() except this will output all arguments immediately to stderr.

util.puts([...])

A synchronous output function. Will block the process and output all arguments to stdout with newlines after each argument.

util.print([...])

A synchronous output function. Will block the process, cast each argument to a string then output to stdout. Does not place newlines after each argument.

util.log(string)

Output with timestamp on stdout.

require('util').log('Timestamped message.');

util.inspect(object, [options])

Return a string representation of object, which is useful for debugging.

An optional options object may be passed that alters certain aspects of the formatted string:

• showHidden - if true then the object's non-enumerable properties will be shown too. Defaults to false.
• depth - tells inspect how many times to recurse while formatting the object. This is useful for inspecting large complicated objects. Defaults to 2. To make it recurse indefinitely pass null.
• colors - if true, then the output will be styled with ANSI color codes. Defaults to false. Colors are customizable, see below.
• customInspect - if false, then custom inspect() functions defined on the objects being inspected won't be called. Defaults to true.

Example of inspecting all properties of the util object:

var util = require('util');

console.log(util.inspect(util, { showHidden: true, depth: null }));

Customizing util.inspect colors

Color output (if enabled) of util.inspect is customizable globally via util.inspect.styles and util.inspect.colors objects.

util.inspect.styles is a map assigning each style a color from util.inspect.colors. Highlighted styles and their default values are: number (yellow) boolean (yellow) string (green) date (magenta) regexp (red) null (bold) undefined (grey) special - only function at this time (cyan) * name (intentionally no styling)

Predefined color codes are: white, grey, black, blue, cyan, green, magenta, red and yellow. There are also bold, italic, underline and inverse codes.

Objects also may define their own inspect(depth) function which util.inspect() will invoke and use the result of when inspecting the object:

var util = require('util');

var obj = { name: 'nate' };

obj.inspect = function(depth) {

return '{' + this.name + '}';

};

util.inspect(obj);

// "{nate}"

util.isArray(object)

Returns true if the given "object" is an Array. false otherwise.

var util = require('util');

util.isArray([])

// true

util.isArray(new Array)

// true

util.isArray({})

// false

util.isRegExp(object)

Returns true if the given "object" is a RegExp. false otherwise.

var util = require('util');

util.isRegExp(/some regexp/)

// true

util.isRegExp(new RegExp('another regexp'))

// true

util.isRegExp({})

// false

util.isDate(object)

Returns true if the given "object" is a Date. false otherwise.

var util = require('util');

util.isDate(new Date())

// true

util.isDate(Date())

// false (without 'new' returns a String)

util.isDate({})

// false

util.isError(object)

Returns true if the given "object" is an Error. false otherwise.

var util = require('util');

util.isError(new Error())

// true

util.isError(new TypeError())

// true

util.isError({ name: 'Error', message: 'an error occurred' })

// false

util.pump(readableStream, writableStream, [callback])

Stability: 0 - Deprecated: Use readableStream.pipe(writableStream)

Read the data from readableStream and send it to the writableStream. When writableStream.write(data) returns false readableStream will be paused until the drain event occurs on the writableStream. callback gets an error as its only argument and is called when writableStream is closed or when an error occurs.

util.inherits(constructor, superConstructor)

Inherit the prototype methods from one constructor into another. The prototype of constructor will be set to a new object created from superConstructor.

As an additional convenience, superConstructor will be accessible through the constructor.super_ property.

var util = require("util");

var events = require("events");

function MyStream() {

events.EventEmitter.call(this);

}

util.inherits(MyStream, events.EventEmitter);

MyStream.prototype.write = function(data) {

this.emit("data", data);

}

var stream = new MyStream();

console.log(stream instanceof events.EventEmitter); // true

console.log(MyStream.super_ === events.EventEmitter); // true

stream.on("data", function(data) {

console.log('Received data: "' + data + '"');

})

stream.write("It works!"); // Received data: "It works!"

Events

Stability: 4 - API Frozen

Many objects in Node emit events: a net.Server emits an event each time a peer connects to it, a fs.readStream emits an event when the file is opened. All objects which emit events are instances of events.EventEmitter. You can access this module by doing: require("events");

Typically, event names are represented by a camel-cased string, however, there aren't any strict restrictions on that, as any string will be accepted.

Functions can then be attached to objects, to be executed when an event is emitted. These functions are called listeners.

Class: events.EventEmitter

To access the EventEmitter class, require('events').EventEmitter.

When an EventEmitter instance experiences an error, the typical action is to emit an 'error' event. Error events are treated as a special case in node. If there is no listener for it, then the default action is to print a stack trace and exit the program.

All EventEmitters emit the event 'newListener' when new listeners are added and 'removeListener' when a listener is removed.

emitter.on(event, listener)

Adds a listener to the end of the listeners array for the specified event.

server.on('connection', function (stream) {

console.log('someone connected!');

});

emitter.once(event, listener)

Adds a one time listener for the event. This listener is invoked only the next time the event is fired, after which it is removed.

server.once('connection', function (stream) {

console.log('Ah, we have our first user!');

});

emitter.removeListener(event, listener)

Remove a listener from the listener array for the specified event. Caution: changes array indices in the listener array behind the listener.

var callback = function(stream) {

console.log('someone connected!');

};

server.on('connection', callback);

// ...

server.removeListener('connection', callback);

emitter.removeAllListeners([event])

Removes all listeners, or those of the specified event.

emitter.setMaxListeners(n)

By default EventEmitters will print a warning if more than 10 listeners are added for a particular event. This is a useful default which helps finding memory leaks. Obviously not all Emitters should be limited to 10. This function allows that to be increased. Set to zero for unlimited.

emitter.listeners(event)

Returns an array of listeners for the specified event.

server.on('connection', function (stream) {

console.log('someone connected!');

});

console.log(util.inspect(server.listeners('connection'))); // [ [Function] ]

emitter.emit(event, [arg1], [arg2], [...])

Execute each of the listeners in order with the supplied arguments.

Class Method: EventEmitter.listenerCount(emitter, event)

Return the number of listeners for a given event.

Event: 'newListener'

• event String The event name
• listener Function The event handler function

This event is emitted any time someone adds a new listener.

Event: 'removeListener'

• event String The event name
• listener Function The event handler function

This event is emitted any time someone removes a listener.

Domain

Stability: 2 - Unstable

Domains provide a way to handle multiple different IO operations as a single group. If any of the event emitters or callbacks registered to a domain emit an error event, or throw an error, then the domain object will be notified, rather than losing the context of the error in the process.on('uncaughtException') handler, or causing the program to exit with an error code.

This feature is new in Node version 0.8. It is a first pass, and is expected to change significantly in future versions. Please use it and provide feedback.

Due to their experimental nature, the Domains features are disabled unless the domain module is loaded at least once. No domains are created or registered by default. This is by design, to prevent adverse effects on current programs. It is expected to be enabled by default in future Node.js versions.

Additions to Error objects

Any time an Error object is routed through a domain, a few extra fields are added to it.

• error.domain The domain that first handled the error.
• error.domainEmitter The event emitter that emitted an 'error' event with the error object.
• error.domainBound The callback function which was bound to the domain, and passed an error as its first argument.
• error.domainThrown A boolean indicating whether the error was thrown, emitted, or passed to a bound callback function.

Implicit Binding

If domains are in use, then all new EventEmitter objects (including Stream objects, requests, responses, etc.) will be implicitly bound to the active domain at the time of their creation.

Additionally, callbacks passed to lowlevel event loop requests (such as to fs.open, or other callback-taking methods) will automatically be bound to the active domain. If they throw, then the domain will catch the error.

In order to prevent excessive memory usage, Domain objects themselves are not implicitly added as children of the active domain. If they were, then it would be too easy to prevent request and response objects from being properly garbage collected.

If you want to nest Domain objects as children of a parent Domain, then you must explicitly add them, and then dispose of them later.

Implicit binding routes thrown errors and 'error' events to the Domain's error event, but does not register the EventEmitter on the Domain, so domain.dispose() will not shut down the EventEmitter. Implicit binding only takes care of thrown errors and 'error' events.

Explicit Binding

Sometimes, the domain in use is not the one that ought to be used for a specific event emitter. Or, the event emitter could have been created in the context of one domain, but ought to instead be bound to some other domain.

For example, there could be one domain in use for an HTTP server, but perhaps we would like to have a separate domain to use for each request.

That is possible via explicit binding.

For example:

// create a top-level domain for the server

var serverDomain = domain.create();

serverDomain.run(function() {

// server is created in the scope of serverDomain

http.createServer(function(req, res) {

// req and res are also created in the scope of serverDomain

// however, we'd prefer to have a separate domain for each request.

// create it first thing, and add req and res to it.

var reqd = domain.create();

reqd.add(req);

reqd.add(res);

reqd.on('error', function(er) {

console.error('Error', er, req.url);

try {

res.writeHead(500);

res.end('Error occurred, sorry.');

res.on('close', function() {

// forcibly shut down any other things added to this domain

reqd.dispose();

});

} catch (er) {

console.error('Error sending 500', er, req.url);

// tried our best. clean up anything remaining.

reqd.dispose();

}

});

}).listen(1337);

});

domain.create()

• return: Domain

Returns a new Domain object.

Class: Domain

The Domain class encapsulates the functionality of routing errors and uncaught exceptions to the active Domain object.

Domain is a child class of EventEmitter. To handle the errors that it catches, listen to its error event.

domain.run(fn)

• fn Function

Run the supplied function in the context of the domain, implicitly binding all event emitters, timers, and lowlevel requests that are created in that context.

This is the most basic way to use a domain.

Example:

var d = domain.create();

d.on('error', function(er) {

console.error('Caught error!', er);

});

d.run(function() {

process.nextTick(function() {

setTimeout(function() { // simulating some various async stuff

fs.open('non-existent file', 'r', function(er, fd) {

if (er) throw er;

// proceed...

});

}, 100);

});

});

In this example, the d.on('error') handler will be triggered, rather than crashing the program.

domain.members

• Array

An array of timers and event emitters that have been explicitly added to the domain.

domain.add(emitter)

• emitter EventEmitter | Timer emitter or timer to be added to the domain

Explicitly adds an emitter to the domain. If any event handlers called by the emitter throw an error, or if the emitter emits an error event, it will be routed to the domain's error event, just like with implicit binding.

This also works with timers that are returned from setInterval and setTimeout. If their callback function throws, it will be caught by the domain 'error' handler.

If the Timer or EventEmitter was already bound to a domain, it is removed from that one, and bound to this one instead.

domain.remove(emitter)

• emitter EventEmitter | Timer emitter or timer to be removed from the domain

The opposite of domain.add(emitter). Removes domain handling from the specified emitter.

domain.bind(callback)

• callback Function The callback function
• return: Function The bound function

The returned function will be a wrapper around the supplied callback function. When the returned function is called, any errors that are thrown will be routed to the domain's error event.

Example

var d = domain.create();

function readSomeFile(filename, cb) {

fs.readFile(filename, 'utf8', d.bind(function(er, data) {

// if this throws, it will also be passed to the domain

return cb(er, data ? JSON.parse(data) : null);

}));

}

d.on('error', function(er) {

// an error occurred somewhere.

// if we throw it now, it will crash the program

// with the normal line number and stack message.

});

domain.intercept(callback)

• callback Function The callback function
• return: Function The intercepted function

This method is almost identical to domain.bind(callback). However, in addition to catching thrown errors, it will also intercept Error objects sent as the first argument to the function.

In this way, the common if (er) return callback(er); pattern can be replaced with a single error handler in a single place.

Example

var d = domain.create();

function readSomeFile(filename, cb) {

fs.readFile(filename, 'utf8', d.intercept(function(data) {

// note, the first argument is never passed to the

// callback since it is assumed to be the 'Error' argument

// and thus intercepted by the domain.

// if this throws, it will also be passed to the domain

// so the error-handling logic can be moved to the 'error'

// event on the domain instead of being repeated throughout

// the program.

return cb(null, JSON.parse(data));

}));

}

d.on('error', function(er) {

// an error occurred somewhere.

// if we throw it now, it will crash the program

// with the normal line number and stack message.

});

domain.dispose()

The dispose method destroys a domain, and makes a best effort attempt to clean up any and all IO that is associated with the domain. Streams are aborted, ended, closed, and/or destroyed. Timers are cleared. Explicitly bound callbacks are no longer called. Any error events that are raised as a result of this are ignored.

The intention of calling dispose is generally to prevent cascading errors when a critical part of the Domain context is found to be in an error state.

Once the domain is disposed the dispose event will emit.

Note that IO might still be performed. However, to the highest degree possible, once a domain is disposed, further errors from the emitters in that set will be ignored. So, even if some remaining actions are still in flight, Node.js will not communicate further about them.

Buffer

Stability: 3 - Stable

Pure JavaScript is Unicode friendly but not nice to binary data. When dealing with TCP streams or the file system, it's necessary to handle octet streams. Node has several strategies for manipulating, creating, and consuming octet streams.

Raw data is stored in instances of the Buffer class. A Buffer is similar to an array of integers but corresponds to a raw memory allocation outside the V8 heap. A Buffer cannot be resized.

The Buffer class is a global, making it very rare that one would need to ever require('buffer').

Converting between Buffers and JavaScript string objects requires an explicit encoding method. Here are the different string encodings.

• 'ascii' - for 7 bit ASCII data only. This encoding method is very fast, and will strip the high bit if set.
  Note that when converting from string to buffer, this encoding converts a null character ('\0' or '\u0000') into 0x20 (character code of a space). If you want to convert a null character into 0x00, you should use 'utf8'.
• 'utf8' - Multibyte encoded Unicode characters. Many web pages and other document formats use UTF-8.
• 'utf16le' - 2 or 4 bytes, little endian encoded Unicode characters. Surrogate pairs (U+10000 to U+10FFFF) are supported.
• 'ucs2' - Alias of 'utf16le'.
• 'base64' - Base64 string encoding.
• 'binary' - A way of encoding raw binary data into strings by using only the first 8 bits of each character. This encoding method is deprecated and should be avoided in favor of Buffer objects where possible. This encoding will be removed in future versions of Node.
• 'hex' - Encode each byte as two hexadecimal characters.

A Buffer object can also be used with typed arrays. The buffer object is cloned to an ArrayBuffer that is used as the backing store for the typed array. The memory of the buffer and the ArrayBuffer is not shared.

NOTE: Node.js v0.8 simply retained a reference to the buffer in array.buffer instead of cloning it.

While more efficient, it introduces subtle incompatibilities with the typed arrays specification. ArrayBuffer#slice() makes a copy of the slice while Buffer#slice() creates a view.

Class: Buffer

The Buffer class is a global type for dealing with binary data directly. It can be constructed in a variety of ways.

new Buffer(size)

• size Number

Allocates a new buffer of size octets.

new Buffer(array)

• array Array

Allocates a new buffer using an array of octets.

new Buffer(str, [encoding])

• str String - string to encode.
• encoding String - encoding to use, Optional.

Allocates a new buffer containing the given str. encoding defaults to 'utf8'.

Class Method: Buffer.isEncoding(encoding)

• encoding String The encoding string to test

Returns true if the encoding is a valid encoding argument, or false otherwise.

buf.write(string, [offset], [length], [encoding])

• string String - data to be written to buffer
• offset Number, Optional, Default: 0
• length Number, Optional, Default: buffer.length - offset
• encoding String, Optional, Default: 'utf8'

Writes string to the buffer at offset using the given encoding. offset defaults to 0, encoding defaults to 'utf8'. length is the number of bytes to write. Returns number of octets written. If buffer did not contain enough space to fit the entire string, it will write a partial amount of the string. length defaults to buffer.length - offset. The method will not write partial characters.

buf = new Buffer(256);

len = buf.write('\u00bd + \u00bc = \u00be', 0);

console.log(len + " bytes: " + buf.toString('utf8', 0, len));

The number of characters written (which may be different than the number of bytes written) is set in Buffer._charsWritten and will be overwritten the next time buf.write() is called.

buf.toString([encoding], [start], [end])

• encoding String, Optional, Default: 'utf8'
• start Number, Optional, Default: 0
• end Number, Optional, Default: buffer.length

Decodes and returns a string from buffer data encoded with encoding (defaults to 'utf8') beginning at start (defaults to 0) and ending at end (defaults to buffer.length).

See buffer.write() example, above.

buf.toJSON()

Returns a JSON-representation of the Buffer instance, which is identical to the output for JSON Arrays. JSON.stringify implicitly calls this function when stringifying a Buffer instance.

Example:

var buf = new Buffer('test');

var json = JSON.stringify(buf);

console.log(json);

// '[116,101,115,116]'

var copy = new Buffer(JSON.parse(json));

console.log(copy);

// <Buffer 74 65 73 74>

buf[index]

Get and set the octet at index. The values refer to individual bytes, so the legal range is between 0x00 and 0xFF hex or 0 and 255.

Example: copy an ASCII string into a buffer, one byte at a time:

str = "node.js";

buf = new Buffer(str.length);

for (var i = 0; i < str.length ; i++) {

buf[i] = str.charCodeAt(i);

}

console.log(buf);

// node.js

Class Method: Buffer.isBuffer(obj)

• obj Object
• Return: Boolean

Tests if obj is a Buffer.

Class Method: Buffer.byteLength(string, [encoding])

• string String
• encoding String, Optional, Default: 'utf8'
• Return: Number

Gives the actual byte length of a string. encoding defaults to 'utf8'. This is not the same as String.prototype.length since that returns the number of characters in a string.

Example:

str = '\u00bd + \u00bc = \u00be';

console.log(str + ": " + str.length + " characters, " +

Buffer.byteLength(str, 'utf8') + " bytes");

// ½ + ¼ = ¾: 9 characters, 12 bytes

Class Method: Buffer.concat(list, [totalLength])

• list Array List of Buffer objects to concat
• totalLength Number Total length of the buffers when concatenated

Returns a buffer which is the result of concatenating all the buffers in the list together.

If the list has no items, or if the totalLength is 0, then it returns a zero-length buffer.

If the list has exactly one item, then the first item of the list is returned.

If the list has more than one item, then a new Buffer is created.

If totalLength is not provided, it is read from the buffers in the list. However, this adds an additional loop to the function, so it is faster to provide the length explicitly.

buf.length

• Number

The size of the buffer in bytes. Note that this is not necessarily the size of the contents. length refers to the amount of memory allocated for the buffer object. It does not change when the contents of the buffer are changed.

buf = new Buffer(1234);

console.log(buf.length);

buf.write("some string", 0, "ascii");

console.log(buf.length);

// 1234

// 1234

buf.copy(targetBuffer, [targetStart], [sourceStart], [sourceEnd])

• targetBuffer Buffer object - Buffer to copy into
• targetStart Number, Optional, Default: 0
• sourceStart Number, Optional, Default: 0
• sourceEnd Number, Optional, Default: buffer.length

Does copy between buffers. The source and target regions can be overlapped. targetStart and sourceStart default to 0. sourceEnd defaults to buffer.length.

All values passed that are undefined/NaN or are out of bounds are set equal to their respective defaults.

Example: build two Buffers, then copy buf1 from byte 16 through byte 19 into buf2, starting at the 8th byte in buf2.

buf1 = new Buffer(26);

buf2 = new Buffer(26);

for (var i = 0 ; i < 26 ; i++) {

buf1[i] = i + 97; // 97 is ASCII a

buf2[i] = 33; // ASCII !

}

buf1.copy(buf2, 8, 16, 20);

console.log(buf2.toString('ascii', 0, 25));

// !!!!!!!!qrst!!!!!!!!!!!!!

buf.slice([start], [end])

• start Number, Optional, Default: 0
• end Number, Optional, Default: buffer.length

Returns a new buffer which references the same memory as the old, but offset and cropped by the start (defaults to 0) and end (defaults to buffer.length) indexes. Negative indexes start from the end of the buffer.

Modifying the new buffer slice will modify memory in the original buffer!

Example: build a Buffer with the ASCII alphabet, take a slice, then modify one byte from the original Buffer.

var buf1 = new Buffer(26);

for (var i = 0 ; i < 26 ; i++) {

buf1[i] = i + 97; // 97 is ASCII a

}

var buf2 = buf1.slice(0, 3);

console.log(buf2.toString('ascii', 0, buf2.length));

buf1[0] = 33;

console.log(buf2.toString('ascii', 0, buf2.length));

// abc

// !bc

buf.readUInt8(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads an unsigned 8 bit integer from the buffer at the specified offset.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Example:

var buf = new Buffer(4);

buf[0] = 0x3;

buf[1] = 0x4;

buf[2] = 0x23;

buf[3] = 0x42;

for (ii = 0; ii < buf.length; ii++) {

console.log(buf.readUInt8(ii));

}

// 0x3

// 0x4

// 0x23

// 0x42

buf.readUInt16BE(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads an unsigned 16 bit integer from the buffer at the specified offset with specified endian format.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Example:

var buf = new Buffer(4);

buf[0] = 0x3;

buf[1] = 0x4;

buf[2] = 0x23;

buf[3] = 0x42;

console.log(buf.readUInt16BE(0));

console.log(buf.readUInt16LE(0));

console.log(buf.readUInt16BE(1));

console.log(buf.readUInt16LE(1));

console.log(buf.readUInt16BE(2));

console.log(buf.readUInt16LE(2));

// 0x0304

// 0x0403

// 0x0423

// 0x2304

// 0x2342

// 0x4223

buf.readUInt32BE(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads an unsigned 32 bit integer from the buffer at the specified offset with specified endian format.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Example:

var buf = new Buffer(4);

buf[0] = 0x3;

buf[1] = 0x4;

buf[2] = 0x23;

buf[3] = 0x42;

console.log(buf.readUInt32BE(0));

console.log(buf.readUInt32LE(0));

// 0x03042342

// 0x42230403

buf.readInt8(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads a signed 8 bit integer from the buffer at the specified offset.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Works as buffer.readUInt8, except buffer contents are treated as two's complement signed values.

buf.readInt16BE(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads a signed 16 bit integer from the buffer at the specified offset with specified endian format.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Works as buffer.readUInt16*, except buffer contents are treated as two's complement signed values.

buf.readInt32BE(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads a signed 32 bit integer from the buffer at the specified offset with specified endian format.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Works as buffer.readUInt32*, except buffer contents are treated as two's complement signed values.

buf.readFloatBE(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads a 32 bit float from the buffer at the specified offset with specified endian format.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Example:

var buf = new Buffer(4);

buf[0] = 0x00;

buf[1] = 0x00;

buf[2] = 0x80;

buf[3] = 0x3f;

console.log(buf.readFloatLE(0));

// 0x01

buf.readDoubleBE(offset, [noAssert])

• offset Number
• noAssert Boolean, Optional, Default: false
• Return: Number

Reads a 64 bit double from the buffer at the specified offset with specified endian format.

Set noAssert to true to skip validation of offset. This means that offset may be beyond the end of the buffer. Defaults to false.

Example:

var buf = new Buffer(8);

buf[0] = 0x55;

buf[1] = 0x55;

buf[2] = 0x55;

buf[3] = 0x55;

buf[4] = 0x55;

buf[5] = 0x55;

buf[6] = 0xd5;

buf[7] = 0x3f;

console.log(buf.readDoubleLE(0));

// 0.3333333333333333

buf.writeUInt8(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset. Note, value must be a valid unsigned 8 bit integer.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Example:

var buf = new Buffer(4);

buf.writeUInt8(0x3, 0);

buf.writeUInt8(0x4, 1);

buf.writeUInt8(0x23, 2);

buf.writeUInt8(0x42, 3);

console.log(buf);

// <Buffer 03 04 23 42>

buf.writeUInt16BE(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset with specified endian format. Note, value must be a valid unsigned 16 bit integer.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Example:

var buf = new Buffer(4);

buf.writeUInt16BE(0xdead, 0);

buf.writeUInt16BE(0xbeef, 2);

console.log(buf);

buf.writeUInt16LE(0xdead, 0);

buf.writeUInt16LE(0xbeef, 2);

console.log(buf);

// <Buffer de ad be ef>

// <Buffer ad de ef be>

buf.writeUInt32BE(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset with specified endian format. Note, value must be a valid unsigned 32 bit integer.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Example:

var buf = new Buffer(4);

buf.writeUInt32BE(0xfeedface, 0);

console.log(buf);

buf.writeUInt32LE(0xfeedface, 0);

console.log(buf);

// <Buffer fe ed fa ce>

// <Buffer ce fa ed fe>

buf.writeInt8(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset. Note, value must be a valid signed 8 bit integer.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Works as buffer.writeUInt8, except value is written out as a two's complement signed integer into buffer.

buf.writeInt16BE(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset with specified endian format. Note, value must be a valid signed 16 bit integer.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Works as buffer.writeUInt16*, except value is written out as a two's complement signed integer into buffer.

buf.writeInt32BE(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset with specified endian format. Note, value must be a valid signed 32 bit integer.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Works as buffer.writeUInt32*, except value is written out as a two's complement signed integer into buffer.

buf.writeFloatBE(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset with specified endian format. Note, behavior is unspecified if value is not a 32 bit float.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Example:

var buf = new Buffer(4);

buf.writeFloatBE(0xcafebabe, 0);

console.log(buf);

buf.writeFloatLE(0xcafebabe, 0);

console.log(buf);

// <Buffer 4f 4a fe bb>

// <Buffer bb fe 4a 4f>

buf.writeDoubleBE(value, offset, [noAssert])

• value Number
• offset Number
• noAssert Boolean, Optional, Default: false

Writes value to the buffer at the specified offset with specified endian format. Note, value must be a valid 64 bit double.

Set noAssert to true to skip validation of value and offset. This means that value may be too large for the specific function and offset may be beyond the end of the buffer leading to the values being silently dropped. This should not be used unless you are certain of correctness. Defaults to false.

Example:

var buf = new Buffer(8);

buf.writeDoubleBE(0xdeadbeefcafebabe, 0);

console.log(buf);

buf.writeDoubleLE(0xdeadbeefcafebabe, 0);

console.log(buf);

// <Buffer 43 eb d5 b7 dd f9 5f d7>

// <Buffer d7 5f f9 dd b7 d5 eb 43>

buf.fill(value, [offset], [end])

• value
• offset Number, Optional
• end Number, Optional

Fills the buffer with the specified value. If the offset (defaults to 0) and end (defaults to buffer.length) are not given it will fill the entire buffer.

var b = new Buffer(50);

b.fill("h");

buffer.INSPECT_MAX_BYTES

• Number, Default: 50

How many bytes will be returned when buffer.inspect() is called. This can be overridden by user modules.

Note that this is a property on the buffer module returned by require('buffer'), not on the Buffer global, or a buffer instance.

Class: SlowBuffer

This class is primarily for internal use. JavaScript programs should use Buffer instead of using SlowBuffer.

In order to avoid the overhead of allocating many C++ Buffer objects for small blocks of memory in the lifetime of a server, Node allocates memory in 8Kb (8192 byte) chunks. If a buffer is smaller than this size, then it will be backed by a parent SlowBuffer object. If it is larger than this, then Node will allocate a SlowBuffer slab for it directly.

Stream

Stability: 2 - Unstable

A stream is an abstract interface implemented by various objects in Node. For example a request to an HTTP server is a stream, as is stdout. Streams are readable, writable, or both. All streams are instances of EventEmitter

You can load the Stream base classes by doing require('stream'). There are base classes provided for Readable streams, Writable streams, Duplex streams, and Transform streams.

Compatibility

In earlier versions of Node, the Readable stream interface was simpler, but also less powerful and less useful.

• Rather than waiting for you to call the read() method, 'data' events would start emitting immediately. If you needed to do some I/O to decide how to handle data, then you had to store the chunks in some kind of buffer so that they would not be lost.
• The pause() method was advisory, rather than guaranteed. This meant that you still had to be prepared to receive 'data' events even when the stream was in a paused state.

In Node v0.10, the Readable class described below was added. For backwards compatibility with older Node programs, Readable streams switch into "old mode" when a 'data' event handler is added, or when the pause() or resume() methods are called. The effect is that, even if you are not using the new read() method and 'readable' event, you no longer have to worry about losing 'data' chunks.

Most programs will continue to function normally. However, this introduces an edge case in the following conditions:

• No 'data' event handler is added.
• The pause() and resume() methods are never called.

For example, consider the following code:

// WARNING! BROKEN!

net.createServer(function(socket) {

// we add an 'end' method, but never consume the data

socket.on('end', function() {

// It will never get here.

socket.end('I got your message (but didnt read it)\n');

});

}).listen(1337);

In versions of node prior to v0.10, the incoming message data would be simply discarded. However, in Node v0.10 and beyond, the socket will remain paused forever.

The workaround in this situation is to call the resume() method to trigger "old mode" behavior:

// Workaround

net.createServer(function(socket) {

socket.on('end', function() {

socket.end('I got your message (but didnt read it)\n');

});

// start the flow of data, discarding it.

socket.resume();

}).listen(1337);

In addition to new Readable streams switching into old-mode, pre-v0.10 style streams can be wrapped in a Readable class using the wrap() method.

Class: stream.Readable

A Readable Stream has the following methods, members, and events.

Note that stream.Readable is an abstract class designed to be extended with an underlying implementation of the _read(size) method. (See below.)

new stream.Readable([options])

• options Object
  • highWaterMark Number The maximum number of bytes to store in the internal buffer before ceasing to read from the underlying resource. Default=16kb
  • encoding String If specified, then buffers will be decoded to strings using the specified encoding. Default=null
  • objectMode Boolean Whether this stream should behave as a stream of objects. Meaning that stream.read(n) returns a single value instead of a Buffer of size n

In classes that extend the Readable class, make sure to call the constructor so that the buffering settings can be properly initialized.

readable._read(size)

• size Number Number of bytes to read asynchronously

Note: This function should NOT be called directly. It should be implemented by child classes, and called by the internal Readable class methods only.

All Readable stream implementations must provide a _read method to fetch data from the underlying resource.

This method is prefixed with an underscore because it is internal to the class that defines it, and should not be called directly by user programs. However, you are expected to override this method in your own extension classes.

When data is available, put it into the read queue by calling readable.push(chunk). If push returns false, then you should stop reading. When _read is called again, you should start pushing more data.

The size argument is advisory. Implementations where a "read" is a single call that returns data can use this to know how much data to fetch. Implementations where that is not relevant, such as TCP or TLS, may ignore this argument, and simply provide data whenever it becomes available. There is no need, for example to "wait" until size bytes are available before calling stream.push(chunk).

readable.push(chunk)

• chunk Buffer | null | String Chunk of data to push into the read queue
• return Boolean Whether or not more pushes should be performed

Note: This function should be called by Readable implementors, NOT by consumers of Readable subclasses. The _read() function will not be called again until at least one push(chunk) call is made. If no data is available, then you MAY call push() (an empty string) to allow a future _read call, without adding any data to the queue.

The Readable class works by putting data into a read queue to be pulled out later by calling the read() method when the 'readable' event fires.

The push() method will explicitly insert some data into the read queue. If it is called with null then it will signal the end of the data.

In some cases, you may be wrapping a lower-level source which has some sort of pause/resume mechanism, and a data callback. In those cases, you could wrap the low-level source object by doing something like this:

// source is an object with readStop() and readStart() methods,

// and an `ondata` member that gets called when it has data, and

// an `onend` member that gets called when the data is over.

var stream = new Readable();

source.ondata = function(chunk) {

// if push() returns false, then we need to stop reading from source

if (!stream.push(chunk))

source.readStop();

};

source.onend = function() {

stream.push(null);

};

// _read will be called when the stream wants to pull more data in

// the advisory size argument is ignored in this case.

stream._read = function(n) {

source.readStart();

};

readable.unshift(chunk)

• chunk Buffer | null | String Chunk of data to unshift onto the read queue
• return Boolean Whether or not more pushes should be performed

This is the corollary of readable.push(chunk). Rather than putting the data at the end of the read queue, it puts it at the front of the read queue.

This is useful in certain use-cases where a stream is being consumed by a parser, which needs to "un-consume" some data that it has optimistically pulled out of the source.

// A parser for a simple data protocol.

// The "header" is a JSON object, followed by 2 \n characters, and

// then a message body.

//

// Note: This can be done more simply as a Transform stream. See below.

function SimpleProtocol(source, options) {

if (!(this instanceof SimpleProtocol))

return new SimpleProtocol(options);

Readable.call(this, options);

this._inBody = false;

this._sawFirstCr = false;

// source is a readable stream, such as a socket or file

this._source = source;

var self = this;

source.on('end', function() {

self.push(null);

});

// give it a kick whenever the source is readable

// read(0) will not consume any bytes

source.on('readable', function() {

self.read(0);

});

this._rawHeader = [];

this.header = null;

}

SimpleProtocol.prototype = Object.create(

Readable.prototype, { constructor: { value: SimpleProtocol }});

SimpleProtocol.prototype._read = function(n) {

if (!this._inBody) {

var chunk = this._source.read();

// if the source doesn't have data, we don't have data yet.

if (chunk === null)

return this.push();

// check if the chunk has a \n\n

var split = -1;

for (var i = 0; i < chunk.length; i++) {

if (chunk[i] === 10) { // '\n'

if (this._sawFirstCr) {

split = i;

break;

} else {

this._sawFirstCr = true;

}

} else {

this._sawFirstCr = false;

}

}

if (split === -1) {

// still waiting for the \n\n

// stash the chunk, and try again.

this._rawHeader.push(chunk);

this.push();

} else {

this._inBody = true;

var h = chunk.slice(0, split);

this._rawHeader.push(h);

var header = Buffer.concat(this._rawHeader).toString();

try {

this.header = JSON.parse(header);

} catch (er) {

this.emit('error', new Error('invalid simple protocol data'));

return;

}

// now, because we got some extra data, unshift the rest

// back into the read queue so that our consumer will see it.

var b = chunk.slice(split);

this.unshift(b);

// and let them know that we are done parsing the header.

this.emit('header', this.header);

}

} else {

// from there on, just provide the data to our consumer.

// careful not to push(null), since that would indicate EOF.

var chunk = this._source.read();

if (chunk) this.push(chunk);

}

};

// Usage:

var parser = new SimpleProtocol(source);

// Now parser is a readable stream that will emit 'header'

// with the parsed header data.

readable.wrap(stream)

• stream Stream An "old style" readable stream

If you are using an older Node library that emits 'data' events and has a pause() method that is advisory only, then you can use the wrap() method to create a Readable stream that uses the old stream as its data source.

For example:

var OldReader = require('./old-api-module.js').OldReader;

var oreader = new OldReader;

var Readable = require('stream').Readable;

var myReader = new Readable().wrap(oreader);

myReader.on('readable', function() {

myReader.read(); // etc.

});

Event: 'readable'

When there is data ready to be consumed, this event will fire.

When this event emits, call the read() method to consume the data.

Event: 'end'

Emitted when the stream has received an EOF (FIN in TCP terminology). Indicates that no more 'data' events will happen. If the stream is also writable, it may be possible to continue writing.

Event: 'data'

The 'data' event emits either a Buffer (by default) or a string if setEncoding() was used.

Note that adding a 'data' event listener will switch the Readable stream into "old mode", where data is emitted as soon as it is available, rather than waiting for you to call read() to consume it.

Event: 'error'

Emitted if there was an error receiving data.

Event: 'close'

Emitted when the underlying resource (for example, the backing file descriptor) has been closed. Not all streams will emit this.

readable.setEncoding(encoding)

Makes the 'data' event emit a string instead of a Buffer. encoding can be 'utf8', 'utf16le' ('ucs2'), 'ascii', or 'hex'.

The encoding can also be set by specifying an encoding field to the constructor.

readable.read([size])

• size Number | null Optional number of bytes to read.
• Return: Buffer | String | null

Note: This function SHOULD be called by Readable stream users.

Call this method to consume data once the 'readable' event is emitted.

The size argument will set a minimum number of bytes that you are interested in. If not set, then the entire content of the internal buffer is returned.

If there is no data to consume, or if there are fewer bytes in the internal buffer than the size argument, then null is returned, and a future 'readable' event will be emitted when more is available.

Calling stream.read(0) will always return null, and will trigger a refresh of the internal buffer, but otherwise be a no-op.

readable.pipe(destination, [options])

• destination Writable Stream
• options Object Optional
  • end Boolean Default=true

Connects this readable stream to destination WriteStream. Incoming data on this stream gets written to destination. Properly manages back-pressure so that a slow destination will not be overwhelmed by a fast readable stream.

This function returns the destination stream.

For example, emulating the Unix cat command:

process.stdin.pipe(process.stdout);

By default end() is called on the destination when the source stream emits end, so that destination is no longer writable. Pass { end: false } as options to keep the destination stream open.

This keeps writer open so that "Goodbye" can be written at the end.

reader.pipe(writer, { end: false });

reader.on("end", function() {

writer.end("Goodbye\n");

});

Note that process.stderr and process.stdout are never closed until the process exits, regardless of the specified options.

readable.unpipe([destination])

• destination Writable Stream Optional

Undo a previously established pipe(). If no destination is provided, then all previously established pipes are removed.

readable.pause()

Switches the readable stream into "old mode", where data is emitted using a 'data' event rather than being buffered for consumption via the read() method.

Ceases the flow of data. No 'data' events are emitted while the stream is in a paused state.

readable.resume()

Switches the readable stream into "old mode", where data is emitted using a 'data' event rather than being buffered for consumption via the read() method.

Resumes the incoming 'data' events after a pause().

Class: stream.Writable

A Writable Stream has the following methods, members, and events.

Note that stream.Writable is an abstract class designed to be extended with an underlying implementation of the _write(chunk, encoding, cb) method. (See below.)

new stream.Writable([options])

• options Object
  • highWaterMark Number Buffer level when write() starts returning false. Default=16kb
  • decodeStrings Boolean Whether or not to decode strings into Buffers before passing them to _write(). Default=true

In classes that extend the Writable class, make sure to call the constructor so that the buffering settings can be properly initialized.

writable._write(chunk, encoding, callback)

• chunk Buffer | String The chunk to be written. Will always be a buffer unless the decodeStrings option was set to false.
• encoding String If the chunk is a string, then this is the encoding type. Ignore chunk is a buffer. Note that chunk will always be a buffer unless the decodeStrings option is explicitly set to false.
• callback Function Call this function (optionally with an error argument) when you are done processing the supplied chunk.

All Writable stream implementations must provide a _write method to send data to the underlying resource.

Note: This function MUST NOT be called directly. It should be implemented by child classes, and called by the internal Writable class methods only.

Call the callback using the standard callback(error) pattern to signal that the write completed successfully or with an error.

If the decodeStrings flag is set in the constructor options, then chunk may be a string rather than a Buffer, and encoding will indicate the sort of string that it is. This is to support implementations that have an optimized handling for certain string data encodings. If you do not explicitly set the decodeStrings option to false, then you can safely ignore the encoding argument, and assume that chunk will always be a Buffer.

This method is prefixed with an underscore because it is internal to the class that defines it, and should not be called directly by user programs. However, you are expected to override this method in your own extension classes.

writable.write(chunk, [encoding], [callback])

• chunk Buffer | String Data to be written
• encoding String Optional. If chunk is a string, then encoding defaults to 'utf8'
• callback Function Optional. Called when this chunk is successfully written.
• Returns Boolean

Writes chunk to the stream. Returns true if the data has been flushed to the underlying resource. Returns false to indicate that the buffer is full, and the data will be sent out in the future. The 'drain' event will indicate when the buffer is empty again.

The specifics of when write() will return false, is determined by the highWaterMark option provided to the constructor.

writable.end([chunk], [encoding], [callback])

• chunk Buffer | String Optional final data to be written
• encoding String Optional. If chunk is a string, then encoding defaults to 'utf8'
• callback Function Optional. Called when the final chunk is successfully written.

Call this method to signal the end of the data being written to the stream.

Event: 'drain'

Emitted when the stream's write queue empties and it's safe to write without buffering again. Listen for it when stream.write() returns false.

Event: 'close'

Emitted when the underlying resource (for example, the backing file descriptor) has been closed. Not all streams will emit this.

Event: 'finish'

When end() is called and there are no more chunks to write, this event is emitted.

Event: 'pipe'

• source Readable Stream

Emitted when the stream is passed to a readable stream's pipe method.

Event 'unpipe'

• source Readable Stream

Emitted when a previously established pipe() is removed using the source Readable stream's unpipe() method.

Class: stream.Duplex

A "duplex" stream is one that is both Readable and Writable, such as a TCP socket connection.

Note that stream.Duplex is an abstract class designed to be extended with an underlying implementation of the _read(size) and _write(chunk, encoding, callback) methods as you would with a Readable or Writable stream class.

Since JavaScript doesn't have multiple prototypal inheritance, this class prototypally inherits from Readable, and then parasitically from Writable. It is thus up to the user to implement both the lowlevel _read(n) method as well as the lowlevel _write(chunk, encoding, cb) method on extension duplex classes.

new stream.Duplex(options)

• options Object Passed to both Writable and Readable constructors. Also has the following fields:
  • allowHalfOpen Boolean Default=true. If set to false, then the stream will automatically end the readable side when the writable side ends and vice versa.

In classes that extend the Duplex class, make sure to call the constructor so that the buffering settings can be properly initialized.

Class: stream.Transform

A "transform" stream is a duplex stream where the output is causally connected in some way to the input, such as a zlib stream or a crypto stream.

There is no requirement that the output be the same size as the input, the same number of chunks, or arrive at the same time. For example, a Hash stream will only ever have a single chunk of output which is provided when the input is ended. A zlib stream will either produce much smaller or much larger than its input.

Rather than implement the _read() and _write() methods, Transform classes must implement the _transform() method, and may optionally also implement the _flush() method. (See below.)

new stream.Transform([options])

• options Object Passed to both Writable and Readable constructors.

In classes that extend the Transform class, make sure to call the constructor so that the buffering settings can be properly initialized.

transform._transform(chunk, encoding, callback)

• chunk Buffer | String The chunk to be transformed. Will always be a buffer unless the decodeStrings option was set to false.
• encoding String If the chunk is a string, then this is the encoding type. (Ignore if decodeStrings chunk is a buffer.)
• callback Function Call this function (optionally with an error argument) when you are done processing the supplied chunk.

Note: This function MUST NOT be called directly. It should be implemented by child classes, and called by the internal Transform class methods only.

All Transform stream implementations must provide a _transform method to accept input and produce output.

_transform should do whatever has to be done in this specific Transform class, to handle the bytes being written, and pass them off to the readable portion of the interface. Do asynchronous I/O, process things, and so on.

Call transform.push(outputChunk) 0 or more times to generate output from this input chunk, depending on how much data you want to output as a result of this chunk.

Call the callback function only when the current chunk is completely consumed. Note that there may or may not be output as a result of any particular input chunk.

This method is prefixed with an underscore because it is internal to the class that defines it, and should not be called directly by user programs. However, you are expected to override this method in your own extension classes.

transform._flush(callback)

• callback Function Call this function (optionally with an error argument) when you are done flushing any remaining data.

Note: This function MUST NOT be called directly. It MAY be implemented by child classes, and if so, will be called by the internal Transform class methods only.

In some cases, your transform operation may need to emit a bit more data at the end of the stream. For example, a Zlib compression stream will store up some internal state so that it can optimally compress the output. At the end, however, it needs to do the best it can with what is left, so that the data will be complete.

In those cases, you can implement a _flush method, which will be called at the very end, after all the written data is consumed, but before emitting end to signal the end of the readable side. Just like with _transform, call transform.push(chunk) zero or more times, as appropriate, and call callback when the flush operation is complete.

This method is prefixed with an underscore because it is internal to the class that defines it, and should not be called directly by user programs. However, you are expected to override this method in your own extension classes.

Example: SimpleProtocol parser

The example above of a simple protocol parser can be implemented much more simply by using the higher level Transform stream class.

In this example, rather than providing the input as an argument, it would be piped into the parser, which is a more idiomatic Node stream approach.

function SimpleProtocol(options) {

if (!(this instanceof SimpleProtocol))

return new SimpleProtocol(options);

Transform.call(this, options);

this._inBody = false;

this._sawFirstCr = false;

this._rawHeader = [];

this.header = null;

}

SimpleProtocol.prototype = Object.create(

Transform.prototype, { constructor: { value: SimpleProtocol }});

SimpleProtocol.prototype._transform = function(chunk, encoding, done) {

if (!this._inBody) {

// check if the chunk has a \n\n

var split = -1;

for (var i = 0; i < chunk.length; i++) {

if (chunk[i] === 10) { // '\n'

if (this._sawFirstCr) {

split = i;

break;

} else {

this._sawFirstCr = true;

}

} else {

this._sawFirstCr = false;

}

}

if (split === -1) {

// still waiting for the \n\n

// stash the chunk, and try again.

this._rawHeader.push(chunk);

} else {

this._inBody = true;

var h = chunk.slice(0, split);

this._rawHeader.push(h);

var header = Buffer.concat(this._rawHeader).toString();

try {

this.header = JSON.parse(header);

} catch (er) {

this.emit('error', new Error('invalid simple protocol data'));

return;

}

// and let them know that we are done parsing the header.

this.emit('header', this.header);

// now, because we got some extra data, emit this first.

this.push(chunk.slice(split));

}

} else {

// from there on, just provide the data to our consumer as-is.

this.push(chunk);

}

done();

};

var parser = new SimpleProtocol();

source.pipe(parser)

// Now parser is a readable stream that will emit 'header'

// with the parsed header data.

Class: stream.PassThrough

This is a trivial implementation of a Transform stream that simply passes the input bytes across to the output. Its purpose is mainly for examples and testing, but there are occasionally use cases where it can come in handy.

Crypto

Stability: 2 - Unstable; API changes are being discussed for

future versions. Breaking changes will be minimized. See below.

Use require('crypto') to access this module.

The crypto module offers a way of encapsulating secure credentials to be used as part of a secure HTTPS net or http connection.

It also offers a set of wrappers for OpenSSL's hash, hmac, cipher, decipher, sign and verify methods.

crypto.getCiphers()

Returns an array with the names of the supported ciphers.

Example:

var ciphers = crypto.getCiphers();

console.log(ciphers); // ['AES128-SHA', 'AES256-SHA', ...]

crypto.getHashes()

Returns an array with the names of the supported hash algorithms.

Example:

var hashes = crypto.getHashes();

console.log(hashes); // ['sha', 'sha1', 'sha1WithRSAEncryption', ...]

crypto.createCredentials(details)

Creates a credentials object, with the optional details being a dictionary with keys:

• pfx : A string or buffer holding the PFX or PKCS12 encoded private key, certificate and CA certificates
• key : A string holding the PEM encoded private key
• passphrase : A string of passphrase for the private key or pfx
• cert : A string holding the PEM encoded certificate
• ca : Either a string or list of strings of PEM encoded CA certificates to trust.
• crl : Either a string or list of strings of PEM encoded CRLs (Certificate Revocation List)
• ciphers: A string describing the ciphers to use or exclude. Consult http://www.openssl.org/docs/apps/ciphers.html#CIPHER_LIST_FORMAT for details on the format.

If no 'ca' details are given, then node.js will use the default publicly trusted list of CAs as given in

http://mxr.mozilla.org/mozilla/source/security/nss/lib/ckfw/builtins/certdata.txt.

crypto.createHash(algorithm)

Creates and returns a hash object, a cryptographic hash with the given algorithm which can be used to generate hash digests.

algorithm is dependent on the available algorithms supported by the version of OpenSSL on the platform. Examples are 'sha1', 'md5', 'sha256', 'sha512', etc. On recent releases, openssl list-message-digest-algorithms will display the available digest algorithms.

Example: this program that takes the sha1 sum of a file

var filename = process.argv[2];

var crypto = require('crypto');

var fs = require('fs');

var shasum = crypto.createHash('sha1');

var s = fs.ReadStream(filename);

s.on('data', function(d) {

shasum.update(d);

});

s.on('end', function() {

var d = shasum.digest('hex');

console.log(d + ' ' + filename);

});

Class: Hash

The class for creating hash digests of data.

It is a stream that is both readable and writable. The written data is used to compute the hash. Once the writable side of the stream is ended, use the read() method to get the computed hash digest. The legacy update and digest methods are also supported.

Returned by crypto.createHash.

hash.update(data, [input_encoding])

Updates the hash content with the given data, the encoding of which is given in input_encoding and can be 'utf8', 'ascii' or 'binary'. If no encoding is provided, then a buffer is expected.

This can be called many times with new data as it is streamed.

hash.digest([encoding])

Calculates the digest of all of the passed data to be hashed. The encoding can be 'hex', 'binary' or 'base64'. If no encoding is provided, then a buffer is returned.

Note: hash object can not be used after digest() method has been called.

crypto.createHmac(algorithm, key)

Creates and returns a hmac object, a cryptographic hmac with the given algorithm and key.

It is a stream that is both readable and writable. The written data is used to compute the hmac. Once the writable side of the stream is ended, use the read() method to get the computed digest. The legacy update and digest methods are also supported.

algorithm is dependent on the available algorithms supported by OpenSSL - see createHash above. key is the hmac key to be used.

Class: Hmac

Class for creating cryptographic hmac content.

Returned by crypto.createHmac.

hmac.update(data)

Update the hmac content with the given data. This can be called many times with new data as it is streamed.

hmac.digest([encoding])

Calculates the digest of all of the passed data to the hmac. The encoding can be 'hex', 'binary' or 'base64'. If no encoding is provided, then a buffer is returned.

Note: hmac object can not be used after digest() method has been called.

crypto.createCipher(algorithm, password)

Creates and returns a cipher object, with the given algorithm and password.

algorithm is dependent on OpenSSL, examples are 'aes192', etc. On recent releases, openssl list-cipher-algorithms will display the available cipher algorithms. password is used to derive key and IV, which must be a 'binary' encoded string or a buffer.

It is a stream that is both readable and writable. The written data is used to compute the hash. Once the writable side of the stream is ended, use the read() method to get the computed hash digest. The legacy update and digest methods are also supported.

crypto.createCipheriv(algorithm, key, iv)

Creates and returns a cipher object, with the given algorithm, key and iv.

algorithm is the same as the argument to createCipher(). key is the raw key used by the algorithm. iv is an initialization vector.

key and iv must be 'binary' encoded strings or buffers.

Class: Cipher

Class for encrypting data.

Returned by crypto.createCipher and crypto.createCipheriv.

Cipher objects are stream that are both readable and writable. The written plain text data is used to produce the encrypted data on the readable side. The legacy update and final methods are also supported.

cipher.update(data, [input_encoding], [output_encoding])

Updates the cipher with data, the encoding of which is given in input_encoding and can be 'utf8', 'ascii' or 'binary'. If no encoding is provided, then a buffer is expected.

The output_encoding specifies the output format of the enciphered data, and can be 'binary', 'base64' or 'hex'. If no encoding is provided, then a buffer is returned.

Returns the enciphered contents, and can be called many times with new data as it is streamed.

cipher.final([output_encoding])

Returns any remaining enciphered contents, with output_encoding being one of: 'binary', 'base64' or 'hex'. If no encoding is provided, then a buffer is returned.

Note: cipher object can not be used after final() method has been called.

cipher.setAutoPadding(auto_padding=true)

You can disable automatic padding of the input data to block size. If auto_padding is false, the length of the entire input data must be a multiple of the cipher's block size or final will fail. Useful for non-standard padding, e.g. using 0x0 instead of PKCS padding. You must call this before cipher.final.

crypto.createDecipher(algorithm, password)

Creates and returns a decipher object, with the given algorithm and key. This is the mirror of the createCipher() above.

crypto.createDecipheriv(algorithm, key, iv)

Creates and returns a decipher object, with the given algorithm, key and iv. This is the mirror of the createCipheriv() above.

Class: Decipher

Class for decrypting data.

Returned by crypto.createDecipher and crypto.createDecipheriv.

Decipher objects are stream that are both readable and writable. The written enciphered data is used to produce the plain-text data on the the readable side. The legacy update and final methods are also supported.

decipher.update(data, [input_encoding], [output_encoding])

Updates the decipher with data, which is encoded in 'binary', 'base64' or 'hex'. If no encoding is provided, then a buffer is expected.

The output_decoding specifies in what format to return the deciphered plaintext: 'binary', 'ascii' or 'utf8'. If no encoding is provided, then a buffer is returned.

decipher.final([output_encoding])

Returns any remaining plaintext which is deciphered, with output_encoding being one of: 'binary', 'ascii' or 'utf8'. If no encoding is provided, then a buffer is returned.

Note: decipher object can not be used after final() method has been called.

decipher.setAutoPadding(auto_padding=true)

You can disable auto padding if the data has been encrypted without standard block padding to prevent decipher.final from checking and removing it. Can only work if the input data's length is a multiple of the ciphers block size. You must call this before streaming data to decipher.update.

crypto.createSign(algorithm)

Creates and returns a signing object, with the given algorithm. On recent OpenSSL releases, openssl list-public-key-algorithms will display the available signing algorithms. Examples are 'RSA-SHA256'.

Class: Sign

Class for generating signatures.

Returned by crypto.createSign.

Sign objects are writable stream. The written data is used to generate the signature. Once all of the data has been written, the sign method will return the signature. The legacy update method is also supported.

sign.update(data)

Updates the sign object with data. This can be called many times with new data as it is streamed.

sign.sign(private_key, [output_format])

Calculates the signature on all the updated data passed through the sign. private_key is a string containing the PEM encoded private key for signing.

Returns the signature in output_format which can be 'binary', 'hex' or 'base64'. If no encoding is provided, then a buffer is returned.

Note: sign object can not be used after sign() method has been called.

crypto.createVerify(algorithm)

Creates and returns a verification object, with the given algorithm. This is the mirror of the signing object above.

Class: Verify

Class for verifying signatures.

Returned by crypto.createVerify.

Verify objects are writable stream. The written data is used to validate against the supplied signature. Once all of the data has been written, the verify method will return true if the supplied signature is valid. The legacy update method is also supported.

verifier.update(data)

Updates the verifier object with data. This can be called many times with new data as it is streamed.

verifier.verify(object, signature, [signature_format])

Verifies the signed data by using the object and signature. object is a string containing a PEM encoded object, which can be one of RSA public key, DSA public key, or X.509 certificate. signature is the previously calculated signature for the data, in the signature_format which can be 'binary', 'hex' or 'base64'. If no encoding is specified, then a buffer is expected.

Returns true or false depending on the validity of the signature for the data and public key.

Note: verifier object can not be used after verify() method has been called.

crypto.createDiffieHellman(prime_length)

Creates a Diffie-Hellman key exchange object and generates a prime of the given bit length. The generator used is 2.

crypto.createDiffieHellman(prime, [encoding])

Creates a Diffie-Hellman key exchange object using the supplied prime. The generator used is 2. Encoding can be 'binary', 'hex', or 'base64'. If no encoding is specified, then a buffer is expected.

Class: DiffieHellman

The class for creating Diffie-Hellman key exchanges.

Returned by crypto.createDiffieHellman.

diffieHellman.generateKeys([encoding])

Generates private and public Diffie-Hellman key values, and returns the public key in the specified encoding. This key should be transferred to the other party. Encoding can be 'binary', 'hex', or 'base64'. If no encoding is provided, then a buffer is returned.

diffieHellman.computeSecret(other_public_key, [input_encoding], [output_encoding])

Computes the shared secret using other_public_key as the other party's public key and returns the computed shared secret. Supplied key is interpreted using specified input_encoding, and secret is encoded using specified output_encoding. Encodings can be 'binary', 'hex', or 'base64'. If the input encoding is not provided, then a buffer is expected.

If no output encoding is given, then a buffer is returned.

diffieHellman.getPrime([encoding])

Returns the Diffie-Hellman prime in the specified encoding, which can be 'binary', 'hex', or 'base64'. If no encoding is provided, then a buffer is returned.

diffieHellman.getGenerator([encoding])

Returns the Diffie-Hellman prime in the specified encoding, which can be 'binary', 'hex', or 'base64'. If no encoding is provided, then a buffer is returned.

diffieHellman.getPublicKey([encoding])

Returns the Diffie-Hellman public key in the specified encoding, which can be 'binary', 'hex', or 'base64'. If no encoding is provided, then a buffer is returned.

diffieHellman.getPrivateKey([encoding])

Returns the Diffie-Hellman private key in the specified encoding, which can be 'binary', 'hex', or 'base64'. If no encoding is provided, then a buffer is returned.

diffieHellman.setPublicKey(public_key, [encoding])

Sets the Diffie-Hellman public key. Key encoding can be 'binary', 'hex' or 'base64'. If no encoding is provided, then a buffer is expected.

diffieHellman.setPrivateKey(private_key, [encoding])

Sets the Diffie-Hellman private key. Key encoding can be 'binary', 'hex' or 'base64'. If no encoding is provided, then a buffer is expected.

crypto.getDiffieHellman(group_name)

Creates a predefined Diffie-Hellman key exchange object. The supported groups are: 'modp1', 'modp2', 'modp5' (defined in RFC 2412) and 'modp14', 'modp15', 'modp16', 'modp17', 'modp18' (defined in RFC 3526). The returned object mimics the interface of objects created by crypto.createDiffieHellman() above, but will not allow to change the keys (with diffieHellman.setPublicKey() for example). The advantage of using this routine is that the parties don't have to generate nor exchange group modulus beforehand, saving both processor and communication time.

Example (obtaining a shared secret):

var crypto = require('crypto');

var alice = crypto.getDiffieHellman('modp5');

var bob = crypto.getDiffieHellman('modp5');

alice.generateKeys();

bob.generateKeys();

var alice_secret = alice.computeSecret(bob.getPublicKey(), null, 'hex');

var bob_secret = bob.computeSecret(alice.getPublicKey(), null, 'hex');

/* alice_secret and bob_secret should be the same */

console.log(alice_secret == bob_secret);

crypto.pbkdf2(password, salt, iterations, keylen, callback)

Asynchronous PBKDF2 applies pseudorandom function HMAC-SHA1 to derive a key of given length from the given password, salt and iterations. The callback gets two arguments (err, derivedKey).

crypto.pbkdf2Sync(password, salt, iterations, keylen)

Synchronous PBKDF2 function. Returns derivedKey or throws error.

crypto.randomBytes(size, [callback])

Generates cryptographically strong pseudo-random data. Usage:

// async

crypto.randomBytes(256, function(ex, buf) {

if (ex) throw ex;

console.log('Have %d bytes of random data: %s', buf.length, buf);

});

// sync

try {

var buf = crypto.randomBytes(256);

console.log('Have %d bytes of random data: %s', buf.length, buf);

} catch (ex) {

// handle error

}

crypto.pseudoRandomBytes(size, [callback])

Generates non-cryptographically strong pseudo-random data. The data returned will be unique if it is sufficiently long, but is not necessarily unpredictable. For this reason, the output of this function should never be used where unpredictability is important, such as in the generation of encryption keys.

Usage is otherwise identical to crypto.randomBytes.

crypto.DEFAULT_ENCODING

The default encoding to use for functions that can take either strings or buffers. The default value is 'buffer', which makes it default to using Buffer objects. This is here to make the crypto module more easily compatible with legacy programs that expected 'binary' to be the default encoding.

Note that new programs will probably expect buffers, so only use this as a temporary measure.

Recent API Changes

The Crypto module was added to Node before there was the concept of a unified Stream API, and before there were Buffer objects for handling binary data.

As such, the streaming classes don't have the typical methods found on other Node classes, and many methods accepted and returned Binary-encoded strings by default rather than Buffers. This was changed to use Buffers by default instead.

This is a breaking change for some use cases, but not all.

For example, if you currently use the default arguments to the Sign class, and then pass the results to the Verify class, without ever inspecting the data, then it will continue to work as before. Where you once got a binary string and then presented the binary string to the Verify object, you'll now get a Buffer, and present the Buffer to the Verify object.

However, if you were doing things with the string data that will not work properly on Buffers (such as, concatenating them, storing in databases, etc.), or you are passing binary strings to the crypto functions without an encoding argument, then you will need to start providing encoding arguments to specify which encoding you'd like to use. To switch to the previous style of using binary strings by default, set the crypto.DEFAULT_ENCODING field to 'binary'. Note that new programs will probably expect buffers, so only use this as a temporary measure.

TLS (SSL)

Stability: 3 - Stable

Use require('tls') to access this module.

The tls module uses OpenSSL to provide Transport Layer Security and/or Secure Socket Layer: encrypted stream communication.

TLS/SSL is a public/private key infrastructure. Each client and each server must have a private key. A private key is created like this

openssl genrsa -out ryans-key.pem 1024

All severs and some clients need to have a certificate. Certificates are public keys signed by a Certificate Authority or self-signed. The first step to getting a certificate is to create a "Certificate Signing Request" (CSR) file. This is done with:

openssl req -new -key ryans-key.pem -out ryans-csr.pem

To create a self-signed certificate with the CSR, do this:

openssl x509 -req -in ryans-csr.pem -signkey ryans-key.pem -out ryans-cert.pem

Alternatively you can send the CSR to a Certificate Authority for signing.

(TODO: docs on creating a CA, for now interested users should just look at test/fixtures/keys/Makefile in the Node source code)

To create .pfx or .p12, do this:

openssl pkcs12 -export -in agent5-cert.pem -inkey agent5-key.pem \

-certfile ca-cert.pem -out agent5.pfx

• in: certificate
• inkey: private key
• certfile: all CA certs concatenated in one file like cat ca1-cert.pem ca2-cert.pem > ca-cert.pem

Client-initiated renegotiation attack mitigation

The TLS protocol lets the client renegotiate certain aspects of the TLS session. Unfortunately, session renegotiation requires a disproportional amount of server-side resources, which makes it a potential vector for denial-of-service attacks.

To mitigate this, renegotiations are limited to three times every 10 minutes. An error is emitted on the CleartextStream instance when the threshold is exceeded. The limits are configurable:

• tls.CLIENT_RENEG_LIMIT: renegotiation limit, default is 3.
• tls.CLIENT_RENEG_WINDOW: renegotiation window in seconds, default is
  10 minutes.

Don't change the defaults unless you know what you are doing.

To test your server, connect to it with openssl s_client -connect address:port and tap R<CR> (that's the letter R followed by a carriage return) a few times.

NPN and SNI

NPN (Next Protocol Negotiation) and SNI (Server Name Indication) are TLS handshake extensions allowing you:

• NPN - to use one TLS server for multiple protocols (HTTP, SPDY)
• SNI - to use one TLS server for multiple hostnames with different SSL certificates.

tls.createServer(options, [secureConnectionListener])

Creates a new tls.Server. The connectionListener argument is automatically set as a listener for the secureConnection event. The options object has these possibilities:

• pfx: A string or Buffer containing the private key, certificate and CA certs of the server in PFX or PKCS12 format. (Mutually exclusive with the key, cert and ca options.)
• key: A string or Buffer containing the private key of the server in PEM format. (Required)
• passphrase: A string of passphrase for the private key or pfx.
• cert: A string or Buffer containing the certificate key of the server in PEM format. (Required)
• ca: An array of strings or Buffers of trusted certificates. If this is omitted several well known "root" CAs will be used, like VeriSign. These are used to authorize connections.
• crl : Either a string or list of strings of PEM encoded CRLs (Certificate Revocation List)
• ciphers: A string describing the ciphers to use or exclude.
  To mitigate BEAST attacks it is recommended that you use this option in conjunction with the honorCipherOrder option described below to prioritize the non-CBC cipher.
  Defaults to ECDHE-RSA-AES128-SHA256:AES128-GCM-SHA256:RC4:HIGH:!MD5:!aNULL:!EDH. Consult the OpenSSL cipher list format documentation for details on the format.
  ECDHE-RSA-AES128-SHA256 and AES128-GCM-SHA256 are used when node.js is linked against OpenSSL 1.0.1 or newer and the client speaks TLS 1.2, RC4 is used as a secure fallback.
  NOTE: Previous revisions of this section suggested AES256-SHA as an acceptable cipher. Unfortunately, AES256-SHA is a CBC cipher and therefore susceptible to BEAST attacks. Do not use it.
• handshakeTimeout: Abort the connection if the SSL/TLS handshake does not finish in this many milliseconds. The default is 120 seconds.
  A 'clientError' is emitted on the tls.Server object whenever a handshake times out.
• honorCipherOrder : When choosing a cipher, use the server's preferences instead of the client preferences.
  Note that if SSLv2 is used, the server will send its list of preferences to the client, and the client chooses the cipher.
  Although, this option is disabled by default, it is recommended that you use this option in conjunction with the ciphers option to mitigate BEAST attacks.
• requestCert: If true the server will request a certificate from clients that connect and attempt to verify that certificate. Default: false.
• rejectUnauthorized: If true the server will reject any connection which is not authorized with the list of supplied CAs. This option only has an effect if requestCert is true. Default: false.
• NPNProtocols: An array or Buffer of possible NPN protocols. (Protocols should be ordered by their priority).
• SNICallback: A function that will be called if client supports SNI TLS extension. Only one argument will be passed to it: servername. And SNICallback should return SecureContext instance. (You can use crypto.createCredentials(...).context to get proper SecureContext). If SNICallback wasn't provided - default callback with high-level API will be used (see below).
• sessionIdContext: A string containing a opaque identifier for session resumption. If requestCert is true, the default is MD5 hash value generated from command-line. Otherwise, the default is not provided.

Here is a simple example echo server:

var tls = require('tls');

var fs = require('fs');

var options = {

key: fs.readFileSync('server-key.pem'),

cert: fs.readFileSync('server-cert.pem'),

// This is necessary only if using the client certificate authentication.

requestCert: true,

// This is necessary only if the client uses the self-signed certificate.

ca: [ fs.readFileSync('client-cert.pem') ]

};

var server = tls.createServer(options, function(cleartextStream) {

console.log('server connected',

cleartextStream.authorized ? 'authorized' : 'unauthorized');

cleartextStream.write("welcome!\n");

cleartextStream.setEncoding('utf8');

cleartextStream.pipe(cleartextStream);

});

server.listen(8000, function() {

console.log('server bound');

});

Or

var tls = require('tls');

var fs = require('fs');

var options = {

pfx: fs.readFileSync('server.pfx'),

// This is necessary only if using the client certificate authentication.

requestCert: true,

};

var server = tls.createServer(options, function(cleartextStream) {

console.log('server connected',

cleartextStream.authorized ? 'authorized' : 'unauthorized');

cleartextStream.write("welcome!\n");

cleartextStream.setEncoding('utf8');

cleartextStream.pipe(cleartextStream);

});

server.listen(8000, function() {

console.log('server bound');

});

You can test this server by connecting to it with openssl s_client:

openssl s_client -connect 127.0.0.1:8000

tls.SLAB_BUFFER_SIZE

Size of slab buffer used by all tls servers and clients. Default: 10 * 1024 * 1024.

Don't change the defaults unless you know what you are doing.

tls.connect(port, [host], [options], [callback])

Creates a new client connection to the given port and host (old API) or options.port and options.host. (If host is omitted, it defaults to localhost.) options should be an object which specifies:

• host: Host the client should connect to
• port: Port the client should connect to
• socket: Establish secure connection on a given socket rather than creating a new socket. If this option is specified, host and port are ignored.
• pfx: A string or Buffer containing the private key, certificate and CA certs of the server in PFX or PKCS12 format.
• key: A string or Buffer containing the private key of the client in PEM format.
• passphrase: A string of passphrase for the private key or pfx.
• cert: A string or Buffer containing the certificate key of the client in PEM format.
• ca: An array of strings or Buffers of trusted certificates. If this is omitted several well known "root" CAs will be used, like VeriSign. These are used to authorize connections.
• rejectUnauthorized: If true, the server certificate is verified against the list of supplied CAs. An 'error' event is emitted if verification fails. Default: true.
• NPNProtocols: An array of string or Buffer containing supported NPN protocols. Buffer should have following format: 0x05hello0x05world, where first byte is next protocol name's length. (Passing array should usually be much simpler: ['hello', 'world'].)
• servername: Servername for SNI (Server Name Indication) TLS extension.

The callback parameter will be added as a listener for the [[#Event:_.27secureConnect.27|secureConnect] event.

tls.connect() returns a CleartextStream object.

Here is an example of a client of echo server as described previously:

var tls = require('tls');

var fs = require('fs');

var options = {

// These are necessary only if using the client certificate authentication

key: fs.readFileSync('client-key.pem'),

cert: fs.readFileSync('client-cert.pem'),

// This is necessary only if the server uses the self-signed certificate

ca: [ fs.readFileSync('server-cert.pem') ]

};

var cleartextStream = tls.connect(8000, options, function() {

console.log('client connected',

cleartextStream.authorized ? 'authorized' : 'unauthorized');

process.stdin.pipe(cleartextStream);

process.stdin.resume();

});

cleartextStream.setEncoding('utf8');

cleartextStream.on('data', function(data) {

console.log(data);

});

cleartextStream.on('end', function() {

server.close();

});

Or

var tls = require('tls');

var fs = require('fs');

var options = {

pfx: fs.readFileSync('client.pfx')

};

var cleartextStream = tls.connect(8000, options, function() {

console.log('client connected',

cleartextStream.authorized ? 'authorized' : 'unauthorized');

process.stdin.pipe(cleartextStream);

process.stdin.resume();

});

cleartextStream.setEncoding('utf8');

cleartextStream.on('data', function(data) {

console.log(data);

});

cleartextStream.on('end', function() {

server.close();

});

tls.createSecurePair([credentials], [isServer], [requestCert], [rejectUnauthorized])

Creates a new secure pair object with two streams, one of which reads/writes encrypted data, and one reads/writes cleartext data. Generally the encrypted one is piped to/from an incoming encrypted data stream, and the cleartext one is used as a replacement for the initial encrypted stream.

• credentials: A credentials object from crypto.createCredentials( ... )
• isServer: A boolean indicating whether this tls connection should be opened as a server or a client.
• requestCert: A boolean indicating whether a server should request a certificate from a connecting client. Only applies to server connections.
• rejectUnauthorized: A boolean indicating whether a server should automatically reject clients with invalid certificates. Only applies to servers with requestCert enabled.

tls.createSecurePair() returns a SecurePair object with [cleartext][] and encrypted stream properties.

Class: SecurePair

Returned by tls.createSecurePair.

Event: 'secure'

The event is emitted from the SecurePair once the pair has successfully established a secure connection.

Similarly to the checking for the server 'secureConnection' event, pair.cleartext.authorized should be checked to confirm whether the certificate used properly authorized.

Class: tls.Server

This class is a subclass of net.Server and has the same methods on it. Instead of accepting just raw TCP connections, this accepts encrypted connections using TLS or SSL.

Event: 'secureConnection'

function (cleartextStream) {}

This event is emitted after a new connection has been successfully handshaked. The argument is a instance of CleartextStream. It has all the common stream methods and events.

cleartextStream.authorized is a boolean value which indicates if the client has verified by one of the supplied certificate authorities for the server. If cleartextStream.authorized is false, then cleartextStream.authorizationError is set to describe how authorization failed. Implied but worth mentioning: depending on the settings of the TLS server, you unauthorized connections may be accepted. cleartextStream.npnProtocol is a string containing selected NPN protocol. cleartextStream.servername is a string containing servername requested with SNI.

Event: 'clientError'

function (exception, securePair) { }

When a client connection emits an 'error' event before secure connection is established - it will be forwarded here.

securePair is the tls.SecurePair that the error originated from.

Event: 'newSession'

function (sessionId, sessionData) { }

Emitted on creation of TLS session. May be used to store sessions in external storage.

Event: 'resumeSession'

function (sessionId, callback) { }

Emitted when client wants to resume previous TLS session. Event listener may perform lookup in external storage using given sessionId, and invoke callback(null, sessionData) once finished. If session can't be resumed (i.e. doesn't exist in storage) one may call callback(null, null). Calling callback(err) will terminate incoming connection and destroy socket.

server.listen(port, [host], [callback])

Begin accepting connections on the specified port and host. If the host is omitted, the server will accept connections directed to any IPv4 address (INADDR_ANY).

This function is asynchronous. The last parameter callback will be called when the server has been bound.

See net.Server for more information.

server.close()

Stops the server from accepting new connections. This function is asynchronous, the server is finally closed when the server emits a 'close' event.

server.address()

Returns the bound address, the address family name and port of the server as reported by the operating system. See net.Server.address() for more information.

server.addContext(hostname, credentials)

Add secure context that will be used if client request's SNI hostname is matching passed hostname (wildcards can be used). credentials can contain key, cert and ca.

server.maxConnections

Set this property to reject connections when the server's connection count gets high.

server.connections

The number of concurrent connections on the server.

Class: CryptoStream

This is an encrypted stream.

cryptoStream.bytesWritten

A proxy to the underlying socket's bytesWritten accessor, this will return the total bytes written to the socket, including the TLS overhead.

Class: tls.CleartextStream

This is a stream on top of the Encrypted stream that makes it possible to read/write an encrypted data as a cleartext data.

This instance implements a duplex stream interfaces. It has all the common stream methods and events.

A ClearTextStream is the clear member of a SecurePair object.

Event: 'secureConnect'

This event is emitted after a new connection has been successfully handshaked. The listener will be called no matter if the server's certificate was authorized or not. It is up to the user to test cleartextStream.authorized to see if the server certificate was signed by one of the specified CAs. If cleartextStream.authorized === false then the error can be found in cleartextStream.authorizationError. Also if NPN was used - you can check cleartextStream.npnProtocol for negotiated protocol.

cleartextStream.authorized

A boolean that is true if the peer certificate was signed by one of the specified CAs, otherwise false

cleartextStream.authorizationError

The reason why the peer's certificate has not been verified. This property becomes available only when cleartextStream.authorized === false.

cleartextStream.getPeerCertificate()

Returns an object representing the peer's certificate. The returned object has some properties corresponding to the field of the certificate.

Example:

{ subject:

{ C: 'UK',

ST: 'Acknack Ltd',

L: 'Rhys Jones',

O: 'node.js',

OU: 'Test TLS Certificate',

CN: 'localhost' },

issuer:

{ C: 'UK',

ST: 'Acknack Ltd',

L: 'Rhys Jones',

O: 'node.js',

OU: 'Test TLS Certificate',

CN: 'localhost' },

valid_from: 'Nov 11 09:52:22 2009 GMT',

valid_to: 'Nov 6 09:52:22 2029 GMT',

fingerprint: '2A:7A:C2:DD:E5:F9:CC:53:72:35:99:7A:02:5A:71:38:52:EC:8A:DF' }

If the peer does not provide a certificate, it returns null or an empty object.

cleartextStream.getCipher()

Returns an object representing the cipher name and the SSL/TLS protocol version of the current connection.

Example: { name: 'AES256-SHA', version: 'TLSv1/SSLv3' }

See SSL_CIPHER_get_name() and SSL_CIPHER_get_version() in http://www.openssl.org/docs/ssl/ssl.html#DEALING_WITH_CIPHERS for more information.

cleartextStream.address()

Returns the bound address, the address family name and port of the underlying socket as reported by the operating system. Returns an object with three properties, e.g. { port: 12346, family: 'IPv4', address: '127.0.0.1' }

cleartextStream.remoteAddress

The string representation of the remote IP address. For example, '74.125.127.100' or '2001:4860:a005::68'.

cleartextStream.remotePort

The numeric representation of the remote port. For example, 443.

StringDecoder

Stability: 3 - Stable

To use this module, do require('string_decoder'). StringDecoder decodes a buffer to a string. It is a simple interface to buffer.toString() but provides additional support for utf8.

var StringDecoder = require('string_decoder').StringDecoder;

var decoder = new StringDecoder('utf8');

var cent = new Buffer([0xC2, 0xA2]);

console.log(decoder.write(cent));

var euro = new Buffer([0xE2, 0x82, 0xAC]);

console.log(decoder.write(euro));

Class: StringDecoder

Accepts a single argument, encoding which defaults to utf8.

decoder.write(buffer)

Returns a decoded string.

decoder.end()

Returns any trailing bytes that were left in the buffer.

File System

Stability: 3 - Stable

File I/O is provided by simple wrappers around standard POSIX functions. To use this module do require('fs'). All the methods have asynchronous and synchronous forms.

The asynchronous form always take a completion callback as its last argument. The arguments passed to the completion callback depend on the method, but the first argument is always reserved for an exception. If the operation was completed successfully, then the first argument will be null or undefined.

When using the synchronous form any exceptions are immediately thrown. You can use try/catch to handle exceptions or allow them to bubble up.

Here is an example of the asynchronous version:

var fs = require('fs');

fs.unlink('/tmp/hello', function (err) {

if (err) throw err;

console.log('successfully deleted /tmp/hello');

});

Here is the synchronous version:

var fs = require('fs');

fs.unlinkSync('/tmp/hello')

console.log('successfully deleted /tmp/hello');

With the asynchronous methods there is no guaranteed ordering. So the following is prone to error:

fs.rename('/tmp/hello', '/tmp/world', function (err) {

if (err) throw err;

console.log('renamed complete');

});

fs.stat('/tmp/world', function (err, stats) {

if (err) throw err;

console.log('stats: ' + JSON.stringify(stats));

});

It could be that fs.stat is executed before fs.rename. The correct way to do this is to chain the callbacks.

fs.rename('/tmp/hello', '/tmp/world', function (err) {

if (err) throw err;

fs.stat('/tmp/world', function (err, stats) {

if (err) throw err;

console.log('stats: ' + JSON.stringify(stats));

});

});

In busy processes, the programmer is strongly encouraged to use the asynchronous versions of these calls. The synchronous versions will block the entire process until they complete--halting all connections.

Relative path to filename can be used, remember however that this path will be relative to process.cwd().

Most fs functions let you omit the callback argument. If you do, a default callback is used that ignores errors, but prints a deprecation warning.

IMPORTANT: Omitting the callback is deprecated. v0.12 will throw the errors as exceptions.

fs.rename(oldPath, newPath, callback)

Asynchronous rename(2). No arguments other than a possible exception are given to the completion callback.

fs.renameSync(oldPath, newPath)

Synchronous rename(2).

fs.ftruncate(fd, len, callback)

Asynchronous ftruncate(2). No arguments other than a possible exception are given to the completion callback.

fs.ftruncateSync(fd, len)

Synchronous ftruncate(2).

fs.truncate(path, len, callback)

Asynchronous truncate(2). No arguments other than a possible exception are given to the completion callback.

fs.truncateSync(path, len)

Synchronous truncate(2).

fs.chown(path, uid, gid, callback)

Asynchronous chown(2). No arguments other than a possible exception are given to the completion callback.

fs.chownSync(path, uid, gid)

Synchronous chown(2).

fs.fchown(fd, uid, gid, callback)

Asynchronous fchown(2). No arguments other than a possible exception are given to the completion callback.

fs.fchownSync(fd, uid, gid)

Synchronous fchown(2).

fs.lchown(path, uid, gid, callback)

Asynchronous lchown(2). No arguments other than a possible exception are given to the completion callback.

fs.lchownSync(path, uid, gid)

Synchronous lchown(2).

fs.chmod(path, mode, callback)

Asynchronous chmod(2). No arguments other than a possible exception are given to the completion callback.

fs.chmodSync(path, mode)

Synchronous chmod(2).

fs.fchmod(fd, mode, callback)

Asynchronous fchmod(2). No arguments other than a possible exception are given to the completion callback.

fs.fchmodSync(fd, mode)

Synchronous fchmod(2).

fs.lchmod(path, mode, callback)

Asynchronous lchmod(2). No arguments other than a possible exception are given to the completion callback.

Only available on Mac OS X.

fs.lchmodSync(path, mode)

Synchronous lchmod(2).

fs.stat(path, callback)

Asynchronous stat(2). The callback gets two arguments (err, stats) where stats is a fs.Stats object. See the fs.Stats section below for more information.

fs.lstat(path, callback)

Asynchronous lstat(2). The callback gets two arguments (err, stats) where stats is a fs.Stats object. lstat() is identical to stat(), except that if path is a symbolic link, then the link itself is stat-ed, not the file that it refers to.

fs.fstat(fd, callback)

Asynchronous fstat(2). The callback gets two arguments (err, stats) where stats is a fs.Stats object. fstat() is identical to stat(), except that the file to be stat-ed is specified by the file descriptor fd.

fs.statSync(path)

Synchronous stat(2). Returns an instance of fs.Stats.

fs.lstatSync(path)

Synchronous lstat(2). Returns an instance of fs.Stats.

fs.fstatSync(fd)

Synchronous fstat(2). Returns an instance of fs.Stats.

fs.link(srcpath, dstpath, callback)

Asynchronous link(2). No arguments other than a possible exception are given to the completion callback.

fs.linkSync(srcpath, dstpath)

Synchronous link(2).

fs.symlink(srcpath, dstpath, [type], callback)

Asynchronous symlink(2). No arguments other than a possible exception are given to the completion callback. type argument can be either 'dir', 'file', or 'junction' (default is 'file'). It is only used on Windows (ignored on other platforms). Note that Windows junction points require the destination path to be absolute. When using 'junction', the destination argument will automatically be normalized to absolute path.

fs.symlinkSync(srcpath, dstpath, [type])

Synchronous symlink(2).

fs.readlink(path, callback)

Asynchronous readlink(2). The callback gets two arguments (err, linkString).

fs.readlinkSync(path)

Synchronous readlink(2). Returns the symbolic link's string value.

fs.realpath(path, [cache], callback)

Asynchronous realpath(2). The callback gets two arguments (err, resolvedPath). May use process.cwd to resolve relative paths. cache is an object literal of mapped paths that can be used to force a specific path resolution or avoid additional fs.stat calls for known real paths.

Example:

var cache = {'/etc':'/private/etc'};

fs.realpath('/etc/passwd', cache, function (err, resolvedPath) {

if (err) throw err;

console.log(resolvedPath);

});

fs.realpathSync(path, [cache])

Synchronous realpath(2). Returns the resolved path.

fs.unlink(path, callback)

Asynchronous unlink(2). No arguments other than a possible exception are given to the completion callback.

fs.unlinkSync(path)

Synchronous unlink(2).

fs.rmdir(path, callback)

Asynchronous rmdir(2). No arguments other than a possible exception are given to the completion callback.

fs.rmdirSync(path)

Synchronous rmdir(2).

fs.mkdir(path, [mode], callback)

Asynchronous mkdir(2). No arguments other than a possible exception are given to the completion callback. mode defaults to 0777.

fs.mkdirSync(path, [mode])

Synchronous mkdir(2).

fs.readdir(path, callback)

Asynchronous readdir(3). Reads the contents of a directory. The callback gets two arguments (err, files) where files is an array of the names of the files in the directory excluding '.' and '..'.

fs.readdirSync(path)

Synchronous readdir(3). Returns an array of filenames excluding '.' and '..'.

fs.close(fd, callback)

Asynchronous close(2). No arguments other than a possible exception are given to the completion callback.

fs.closeSync(fd)

Synchronous close(2).

fs.open(path, flags, [mode], callback)

Asynchronous file open. See open(2). flags can be:

• 'r' - Open file for reading. An exception occurs if the file does not exist.
• 'r+' - Open file for reading and writing. An exception occurs if the file does not exist.
• 'rs' - Open file for reading in synchronous mode. Instructs the operating system to bypass the local file system cache.
  This is primarily useful for opening files on NFS mounts as it allows you to skip the potentially stale local cache. It has a very real impact on I/O performance so don't use this mode unless you need it.
  Note that this doesn't turn fs.open() into a synchronous blocking call. If that's what you want then you should be using fs.openSync()
• 'rs+' - Open file for reading and writing, telling the OS to open it synchronously. See notes for 'rs' about using this with caution.
• 'w' - Open file for writing. The file is created (if it does not exist) or truncated (if it exists).
• 'wx' - Like 'w' but opens the file in exclusive mode.
• 'w+' - Open file for reading and writing. The file is created (if it does not exist) or truncated (if it exists).
• 'wx+' - Like 'w+' but opens the file in exclusive mode.
• 'a' - Open file for appending. The file is created if it does not exist.
• 'ax' - Like 'a' but opens the file in exclusive mode.
• 'a+' - Open file for reading and appending. The file is created if it does not exist.
• 'ax+' - Like 'a+' but opens the file in exclusive mode.

mode defaults to 0666. The callback gets two arguments (err, fd).

Exclusive mode (O_EXCL) ensures that path is newly created. fs.open() fails if a file by that name already exists. On POSIX systems, symlinks are not followed. Exclusive mode may or may not work with network file systems.

fs.openSync(path, flags, [mode])

Synchronous open(2).

fs.utimesSync(path, atime, mtime)

Change file timestamps of the file referenced by the supplied path.

fs.futimesSync(fd, atime, mtime)

Change the file timestamps of a file referenced by the supplied file descriptor.

fs.fsync(fd, callback)

Asynchronous fsync(2). No arguments other than a possible exception are given to the completion callback.

fs.fsyncSync(fd)

Synchronous fsync(2).

fs.write(fd, buffer, offset, length, position, callback)

Write buffer to the file specified by fd.

offset and length determine the part of the buffer to be written.

position refers to the offset from the beginning of the file where this data should be written. If position is null, the data will be written at the current position. See pwrite(2).

The callback will be given three arguments (err, written, buffer) where written specifies how many bytes were written from buffer.

Note that it is unsafe to use fs.write multiple times on the same file without waiting for the callback. For this scenario, fs.createWriteStream is strongly recommended.

fs.writeSync(fd, buffer, offset, length, position)

Synchronous version of fs.write(). Returns the number of bytes written.

fs.read(fd, buffer, offset, length, position, callback)

Read data from the file specified by fd.

buffer is the buffer that the data will be written to.

offset is offset within the buffer where reading will start.

length is an integer specifying the number of bytes to read.

position is an integer specifying where to begin reading from in the file. If position is null, data will be read from the current file position.

The callback is given the three arguments, (err, bytesRead, buffer).

fs.readSync(fd, buffer, offset, length, position)

Synchronous version of fs.read. Returns the number of bytesRead.

fs.readFile(filename, [options], callback)

• filename String
• options Object
  • encoding String | Null default = null
  • flag String default = 'r'
• callback Function

Asynchronously reads the entire contents of a file. Example:

fs.readFile('/etc/passwd', function (err, data) {

if (err) throw err;

console.log(data);

});

The callback is passed two arguments (err, data), where data is the contents of the file.

If no encoding is specified, then the raw buffer is returned.

fs.readFileSync(filename, [options])

Synchronous version of fs.readFile. Returns the contents of the filename.

If the encoding option is specified then this function returns a string. Otherwise it returns a buffer.

fs.writeFile(filename, data, [options], callback)

• filename String
• data String | Buffer
• options Object
  • encoding String | Null default = 'utf8'
  • mode Number default = 438 (aka 0666 in Octal)
  • flag String default = 'w'
• callback Function

Asynchronously writes data to a file, replacing the file if it already exists. data can be a string or a buffer.

The encoding option is ignored if data is a buffer. It defaults to 'utf8'.

Example:

fs.writeFile('message.txt', 'Hello Node', function (err) {

if (err) throw err;

console.log('It\'s saved!');

});

fs.writeFileSync(filename, data, [options])

The synchronous version of fs.writeFile.

fs.appendFile(filename, data, [options], callback)

• filename String
• data String | Buffer
• options Object
  • encoding String | Null default = 'utf8'
  • mode Number default = 438 (aka 0666 in Octal)
  • flag String default = 'a'
• callback Function

Asynchronously append data to a file, creating the file if it not yet exists. data can be a string or a buffer.

Example:

fs.appendFile('message.txt', 'data to append', function (err) {

if (err) throw err;

console.log('The "data to append" was appended to file!');

});

fs.appendFileSync(filename, data, [options])

The synchronous version of fs.appendFile.

fs.watchFile(filename, [options], listener)

Stability: 2 - Unstable. Use fs.watch instead, if possible.

Watch for changes on filename. The callback listener will be called each time the file is accessed.

The second argument is optional. The options if provided should be an object containing two members a boolean, persistent, and interval. persistent indicates whether the process should continue to run as long as files are being watched. interval indicates how often the target should be polled, in milliseconds. The default is { persistent: true, interval: 5007 }.

The listener gets two arguments the current stat object and the previous stat object:

fs.watchFile('message.text', function (curr, prev) {

console.log('the current mtime is: ' + curr.mtime);

console.log('the previous mtime was: ' + prev.mtime);

});

These stat objects are instances of fs.Stat.

If you want to be notified when the file was modified, not just accessed you need to compare curr.mtime and prev.mtime.

fs.unwatchFile(filename, [listener])

Stability: 2 - Unstable. Use fs.watch instead, if available.

Stop watching for changes on filename. If listener is specified, only that particular listener is removed. Otherwise, all listeners are removed and you have effectively stopped watching filename.

Calling fs.unwatchFile() with a filename that is not being watched is a no-op, not an error.

fs.watch(filename, [options], [listener])

Stability: 2 - Unstable.

Watch for changes on filename, where filename is either a file or a directory. The returned object is a fs.FSWatcher.

The second argument is optional. The options if provided should be an object containing a boolean member persistent, which indicates whether the process should continue to run as long as files are being watched. The default is { persistent: true }.

The listener callback gets two arguments (event, filename). event is either 'rename' or 'change', and filename is the name of the file which triggered the event.

Caveats

The fs.watch API is not 100% consistent across platforms, and is unavailable in some situations.

Availability

This feature depends on the underlying operating system providing a way to be notified of filesystem changes.

• On Linux systems, this uses inotify.
• On BSD systems (including OS X), this uses kqueue.
• On SunOS systems (including Solaris and SmartOS), this uses event ports.
• On Windows systems, this feature depends on ReadDirectoryChangesW.

If the underlying functionality is not available for some reason, then fs.watch will not be able to function. For example, watching files or directories on network file systems (NFS, SMB, etc.) often doesn't work reliably or at all.

You can still use fs.watchFile, which uses stat polling, but it is slower and less reliable.

Filename Argument

Providing filename argument in the callback is not supported on every platform (currently it's only supported on Linux and Windows). Even on supported platforms filename is not always guaranteed to be provided. Therefore, don't assume that filename argument is always provided in the callback, and have some fallback logic if it is null.

fs.watch('somedir', function (event, filename) {

console.log('event is: ' + event);

if (filename) {

console.log('filename provided: ' + filename);

} else {

console.log('filename not provided');

}

});

fs.exists(path, callback)

Test whether or not the given path exists by checking with the file system. Then call the callback argument with either true or false. Example:

fs.exists('/etc/passwd', function (exists) {

util.debug(exists ? "it's there" : "no passwd!");

});

fs.existsSync(path)

Synchronous version of fs.exists.

Class: fs.Stats

Objects returned from fs.stat(), fs.lstat() and fs.fstat() and their synchronous counterparts are of this type.

• stats.isFile()
• stats.isDirectory()
• stats.isBlockDevice()
• stats.isCharacterDevice()
• stats.isSymbolicLink() (only valid with fs.lstat())
• stats.isFIFO()
• stats.isSocket()

For a regular file util.inspect(stats) would return a string very similar to this:

{ dev: 2114,

ino: 48064969,

mode: 33188,

nlink: 1,

uid: 85,

gid: 100,

rdev: 0,

size: 527,

blksize: 4096,

blocks: 8,

atime: Mon, 10 Oct 2011 23:24:11 GMT,

mtime: Mon, 10 Oct 2011 23:24:11 GMT,

ctime: Mon, 10 Oct 2011 23:24:11 GMT }

Please note that atime, mtime and ctime are instances of Date object and to compare the values of these objects you should use appropriate methods. For most general uses getTime() will return the number of milliseconds elapsed since 1 January 1970 00:00:00 UTC and this integer should be sufficient for any comparison, however there additional methods which can be used for displaying fuzzy information. More details can be found in the MDN JavaScript Reference page.

fs.createReadStream(path, [options])

Returns a new ReadStream object (See Readable Stream).

options is an object with the following defaults:

{ flags: 'r',

encoding: null,

fd: null,

mode: 0666,

bufferSize: 64 * 1024,

autoClose: true

}

options can include start and end values to read a range of bytes from the file instead of the entire file. Both start and end are inclusive and start at 0. The encoding can be 'utf8', 'ascii', or 'base64'.

If autoClose is false, then the file descriptor won't be closed, even if there's an error. It is your responsiblity to close it and make sure there's no file descriptor leak. If autoClose is set to true (default behavior), on error or end the file descriptor will be closed automatically.

An example to read the last 10 bytes of a file which is 100 bytes long:

fs.createReadStream('sample.txt', {start: 90, end: 99});

Class: fs.ReadStream

ReadStream is a Readable Stream.

Event: 'open'

• fd Integer file descriptor used by the ReadStream.

Emitted when the ReadStream's file is opened.

fs.createWriteStream(path, [options])

Returns a new WriteStream object (See Writable Stream).

options is an object with the following defaults:

{ flags: 'w',

encoding: null,

mode: 0666 }

options may also include a start option to allow writing data at some position past the beginning of the file. Modifying a file rather than replacing it may require a flags mode of r+ rather than the default mode w.

fs.WriteStream

WriteStream is a Writable Stream.

Event: 'open'

• fd Integer file descriptor used by the WriteStream.

Emitted when the WriteStream's file is opened.

file.bytesWritten

The number of bytes written so far. Does not include data that is still queued for writing.

Class: fs.FSWatcher

Objects returned from fs.watch() are of this type.

watcher.close()

Stop watching for changes on the given fs.FSWatcher.

Event: 'change'

• event String The type of fs change
• filename String The filename that changed (if relevant/available)

Emitted when something changes in a watched directory or file. See more details in fs.watch.

Event: 'error'

• error Error object

Emitted when an error occurs.

Path

Stability: 3 - Stable

This module contains utilities for handling and transforming file paths. Almost all these methods perform only string transformations. The file system is not consulted to check whether paths are valid.

Use require('path') to use this module. The following methods are provided:

path.normalize(p)

Normalize a string path, taking care of '..' and '.' parts.

When multiple slashes are found, they're replaced by a single one; when the path contains a trailing slash, it is preserved. On Windows backslashes are used.

Example:

path.normalize('/foo/bar//baz/asdf/quux/..')

// returns

'/foo/bar/baz/asdf'

path.join([path1], [path2], [...])

Join all arguments together and normalize the resulting path.

Arguments must be strings. In v0.8, non-string arguments were silently ignored. In v0.10 and up, an exception is thrown.

Example:

path.join('/foo', 'bar', 'baz/asdf', 'quux', '..')

// returns

'/foo/bar/baz/asdf'

path.join('foo', {}, 'bar')

// returns

'foo/bar'

path.resolve([from ...], to)

Resolves to to an absolute path.

If to isn't already absolute from arguments are prepended in right to left order, until an absolute path is found. If after using all from paths still no absolute path is found, the current working directory is used as well. The resulting path is normalized, and trailing slashes are removed unless the path gets resolved to the root directory. Non-string arguments are ignored.

Another way to think of it is as a sequence of cd commands in a shell.

path.resolve('foo/bar', '/tmp/file/', '..', 'a/../subfile')

Is similar to:

cd foo/bar

cd /tmp/file/

cd ..

cd a/../subfile

pwd

The difference is that the different paths don't need to exist and may also be files.

Examples:

path.resolve('/foo/bar', './baz')

// returns

'/foo/bar/baz'

path.resolve('/foo/bar', '/tmp/file/')

// returns

'/tmp/file'

path.resolve('wwwroot', 'static_files/png/', '../gif/image.gif')

// if currently in /home/myself/node, it returns

'/home/myself/node/wwwroot/static_files/gif/image.gif'

path.relative(from, to)

Solve the relative path from from to to.

At times we have two absolute paths, and we need to derive the relative path from one to the other. This is actually the reverse transform of path.resolve, which means we see that:

path.resolve(from, path.relative(from, to)) == path.resolve(to)

Examples:

path.relative('C:\\orandea\\test\\aaa', 'C:\\orandea\\impl\\bbb')

// returns

'..\\..\\impl\\bbb'

path.relative('/data/orandea/test/aaa', '/data/orandea/impl/bbb')

// returns

'../../impl/bbb'

path.dirname(p)

Return the directory name of a path. Similar to the Unix dirname command.

Example:

path.dirname('/foo/bar/baz/asdf/quux')

// returns

'/foo/bar/baz/asdf'

path.basename(p, [ext])

Return the last portion of a path. Similar to the Unix basename command.

Example:

path.basename('/foo/bar/baz/asdf/quux.html')

// returns

'quux.html'

path.basename('/foo/bar/baz/asdf/quux.html', '.html')

// returns

'quux'

path.extname(p)

Return the extension of the path, from the last '.' to end of string in the last portion of the path. If there is no '.' in the last portion of the path or the first character of it is '.', then it returns an empty string. Examples:

path.extname('index.html')

// returns

'.html'

path.extname('index.')

// returns

'.'

path.extname('index')

// returns

path.sep

The platform-specific file separator. '\\' or '/'.

An example on *nix:

'foo/bar/baz'.split(path.sep)

// returns

['foo', 'bar', 'baz']

An example on Windows:

'foo\\bar\\baz'.split(path.sep)

// returns

['foo', 'bar', 'baz']

path.delimiter

The platform-specific path delimiter, ; or ':'.

An example on *nix:

console.log(process.env.PATH)

// '/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin'

process.env.PATH.split(path.delimiter)

// returns

['/usr/bin', '/bin', '/usr/sbin', '/sbin', '/usr/local/bin']

An example on Windows:

console.log(process.env.PATH)

// 'C:\Windows\system32;C:\Windows;C:\Program Files\nodejs\'

process.env.PATH.split(path.delimiter)

// returns

['C:\Windows\system32', 'C:\Windows', 'C:\Program Files\nodejs\']

net

Stability: 3 - Stable

The net module provides you with an asynchronous network wrapper. It contains methods for creating both servers and clients (called streams). You can include this module with require('net');

net.createServer([options], [connectionListener])

Creates a new TCP server. The connectionListener argument is automatically set as a listener for the 'connection' event.

options is an object with the following defaults:

{ allowHalfOpen: false

}

If allowHalfOpen is true, then the socket won't automatically send a FIN packet when the other end of the socket sends a FIN packet. The socket becomes non-readable, but still writable. You should call the end() method explicitly. See 'end' event for more information.

Here is an example of an echo server which listens for connections on port 8124:

var net = require('net');

var server = net.createServer(function(c) { //'connection' listener

console.log('server connected');

c.on('end', function() {

console.log('server disconnected');

});

c.write('hello\r\n');

c.pipe(c);

});

server.listen(8124, function() { //'listening' listener

console.log('server bound');

});

Test this by using telnet:

telnet localhost 8124

To listen on the socket /tmp/echo.sock the third line from the last would just be changed to

server.listen('/tmp/echo.sock', function() { //'listening' listener

Use nc to connect to a UNIX domain socket server:

nc -U /tmp/echo.sock

net.createConnection(options, [connectionListener])

Constructs a new socket object and opens the socket to the given location. When the socket is established, the 'connect' event will be emitted.

For TCP sockets, options argument should be an object which specifies:

• port: Port the client should connect to (Required).
• host: Host the client should connect to. Defaults to 'localhost'.
• localAddress: Local interface to bind to for network connections.

For UNIX domain sockets, options argument should be an object which specifies:

• path: Path the client should connect to (Required).

Common options are:

• allowHalfOpen: if true, the socket won't automatically send a FIN packet when the other end of the socket sends a FIN packet. Defaults to false. See 'end' event for more information.

The connectListener parameter will be added as an listener for the 'connect' event.

Here is an example of a client of echo server as described previously:

var net = require('net');

var client = net.connect({port: 8124},

function() { //'connect' listener

console.log('client connected');

client.write('world!\r\n');

});

client.on('data', function(data) {

console.log(data.toString());

client.end();

});

client.on('end', function() {

console.log('client disconnected');

});

To connect on the socket /tmp/echo.sock the second line would just be changed to

var client = net.connect({path: '/tmp/echo.sock'},

net.createConnection(port, [host], [connectListener])

Creates a TCP connection to port on host. If host is omitted, 'localhost' will be assumed. The connectListener parameter will be added as an listener for the 'connect' event.

net.createConnection(path, [connectListener])

Creates unix socket connection to path. The connectListener parameter will be added as an listener for the 'connect' event.

Class: net.Server

This class is used to create a TCP or UNIX server. A server is a net.Socket that can listen for new incoming connections.

server.listen(port, [host], [backlog], [callback])

Begin accepting connections on the specified port and host. If the host is omitted, the server will accept connections directed to any IPv4 address (INADDR_ANY). A port value of zero will assign a random port.

Backlog is the maximum length of the queue of pending connections. The actual length will be determined by your OS through sysctl settings such as tcp_max_syn_backlog and somaxconn on linux. The default value of this parameter is 511 (not 512).

This function is asynchronous. When the server has been bound, 'listening' event will be emitted. The last parameter callback will be added as an listener for the 'listening' event.

One issue some users run into is getting EADDRINUSE errors. This means that another server is already running on the requested port. One way of handling this would be to wait a second and then try again. This can be done with

server.on('error', function (e) {

if (e.code == 'EADDRINUSE') {

console.log('Address in use, retrying...');

setTimeout(function () {

server.close();

server.listen(PORT, HOST);

}, 1000);

}

});

(Note: All sockets in Node set SO_REUSEADDR already)

server.listen(path, [callback])

Start a UNIX socket server listening for connections on the given path.

This function is asynchronous. When the server has been bound, 'listening' event will be emitted. The last parameter callback will be added as an listener for the 'listening' event.

server.listen(handle, [callback])

• handle Object
• callback Function

The handle object can be set to either a server or socket (anything with an underlying _handle member), or a {fd: <n>} object.

This will cause the server to accept connections on the specified handle, but it is presumed that the file descriptor or handle has already been bound to a port or domain socket.

Listening on a file descriptor is not supported on Windows.

This function is asynchronous. When the server has been bound, 'listening' event will be emitted. the last parameter callback will be added as an listener for the 'listening' event.

server.close([callback])

Stops the server from accepting new connections and keeps existing connections. This function is asynchronous, the server is finally closed when all connections are ended and the server emits a 'close' event. Optionally, you can pass a callback to listen for the 'close' event.

server.address()

Returns the bound address, the address family name and port of the server as reported by the operating system. Useful to find which port was assigned when giving getting an OS-assigned address. Returns an object with three properties, e.g. { port: 12346, family: 'IPv4', address: '127.0.0.1' }

Example:

var server = net.createServer(function (socket) {

socket.end("goodbye\n");

});

// grab a random port.

server.listen(function() {

address = server.address();

console.log("opened server on %j", address);

});

Don't call server.address() until the 'listening' event has been emitted.

server.unref()

Calling unref on a server will allow the program to exit if this is the only active server in the event system. If the server is already unrefd calling unref again will have no effect.

server.ref()

Opposite of unref, calling ref on a previously unrefd server will not let the program exit if it's the only server left (the default behavior). If the server is refd calling ref again will have no effect.

server.maxConnections

Set this property to reject connections when the server's connection count gets high.

It is not recommended to use this option once a socket has been sent to a child with child_process.fork().

server.connections

This function is deprecated; please use [server.getConnections()][] instead. The number of concurrent connections on the server.

This becomes null when sending a socket to a child with child_process.fork(). To poll forks and get current number of active connections use asynchronous server.getConnections instead.

net.Server is an EventEmitter with the following events:

server.getConnections(callback)

Asynchronously get the number of concurrent connections on the server. Works when sockets were sent to forks.

Callback should take two arguments err and count.

Event: 'listening'

Emitted when the server has been bound after calling server.listen.

Event: 'connection'

• Socket object The connection object

Emitted when a new connection is made. socket is an instance of net.Socket.

Event: 'close'

Emitted when the server closes. Note that if connections exist, this event is not emitted until all connections are ended.

Event: 'error'

• Error Object

Emitted when an error occurs. The 'close' event will be called directly following this event. See example in discussion of server.listen.

Class: net.Socket

This object is an abstraction of a TCP or UNIX socket. net.Socket instances implement a duplex Stream interface. They can be created by the user and used as a client (with connect()) or they can be created by Node and passed to the user through the 'connection' event of a server.

new net.Socket([options])

Construct a new socket object.

options is an object with the following defaults:

{ fd: null

type: null

allowHalfOpen: false

}

fd allows you to specify the existing file descriptor of socket. type specified underlying protocol. It can be 'tcp4', 'tcp6', or 'unix'. About allowHalfOpen, refer to createServer() and 'end' event.

socket.connect(path, [connectListener])

Opens the connection for a given socket. If port and host are given, then the socket will be opened as a TCP socket, if host is omitted, localhost will be assumed. If a path is given, the socket will be opened as a unix socket to that path.

Normally this method is not needed, as net.createConnection opens the socket. Use this only if you are implementing a custom Socket.

This function is asynchronous. When the 'connect' event is emitted the socket is established. If there is a problem connecting, the 'connect' event will not be emitted, the 'error' event will be emitted with the exception.

The connectListener parameter will be added as an listener for the 'connect' event.

socket.bufferSize

net.Socket has the property that socket.write() always works. This is to help users get up and running quickly. The computer cannot always keep up with the amount of data that is written to a socket - the network connection simply might be too slow. Node will internally queue up the data written to a socket and send it out over the wire when it is possible. (Internally it is polling on the socket's file descriptor for being writable).

The consequence of this internal buffering is that memory may grow. This property shows the number of characters currently buffered to be written. (Number of characters is approximately equal to the number of bytes to be written, but the buffer may contain strings, and the strings are lazily encoded, so the exact number of bytes is not known.)

Users who experience large or growing bufferSize should attempt to "throttle" the data flows in their program with pause() and resume().

socket.setEncoding([encoding])

Set the encoding for the socket as a Readable Stream. See stream.setEncoding() for more information.

socket.write(data, [encoding], [callback])

Sends data on the socket. The second parameter specifies the encoding in the case of a string--it defaults to UTF8 encoding.

Returns true if the entire data was flushed successfully to the kernel buffer. Returns false if all or part of the data was queued in user memory. 'drain' will be emitted when the buffer is again free.

The optional callback parameter will be executed when the data is finally written out - this may not be immediately.

socket.end([data], [encoding])

Half-closes the socket. i.e., it sends a FIN packet. It is possible the server will still send some data.

If data is specified, it is equivalent to calling socket.write(data, encoding) followed by socket.end().

socket.destroy()

Ensures that no more I/O activity happens on this socket. Only necessary in case of errors (parse error or so).

socket.pause()

Pauses the reading of data. That is, 'data' events will not be emitted. Useful to throttle back an upload.

socket.resume()

Resumes reading after a call to pause().

socket.setTimeout(timeout, [callback])

Sets the socket to timeout after timeout milliseconds of inactivity on the socket. By default net.Socket do not have a timeout.

When an idle timeout is triggered the socket will receive a 'timeout' event but the connection will not be severed. The user must manually end() or destroy() the socket.

If timeout is 0, then the existing idle timeout is disabled.

The optional callback parameter will be added as a one time listener for the 'timeout' event.

socket.setNoDelay([noDelay])

Disables the Nagle algorithm. By default TCP connections use the Nagle algorithm, they buffer data before sending it off. Setting true for noDelay will immediately fire off data each time socket.write() is called. noDelay defaults to true.

socket.setKeepAlive([enable], [initialDelay])

Enable/disable keep-alive functionality, and optionally set the initial delay before the first keepalive probe is sent on an idle socket. enable defaults to false.

Set initialDelay (in milliseconds) to set the delay between the last data packet received and the first keepalive probe. Setting 0 for initialDelay will leave the value unchanged from the default (or previous) setting. Defaults to 0.

socket.address()

Returns the bound address, the address family name and port of the socket as reported by the operating system. Returns an object with three properties, e.g. { port: 12346, family: 'IPv4', address: '127.0.0.1' }

socket.unref()

Calling unref on a socket will allow the program to exit if this is the only active socket in the event system. If the socket is already unrefd calling unref again will have no effect.

socket.ref()

Opposite of unref, calling ref on a previously unrefd socket will not let the program exit if it's the only socket left (the default behavior). If the socket is refd calling ref again will have no effect.

socket.remoteAddress

The string representation of the remote IP address. For example, '74.125.127.100' or '2001:4860:a005::68'.

socket.remotePort

The numeric representation of the remote port. For example, 80 or 21.

socket.localAddress

The string representation of the local IP address the remote client is connecting on. For example, if you are listening on '0.0.0.0' and the client connects on '192.168.1.1', the value would be '192.168.1.1'.

socket.localPort

The numeric representation of the local port. For example, 80 or 21.

socket.bytesRead

The amount of received bytes.

socket.bytesWritten

The amount of bytes sent.

net.Socket instances are EventEmitter with the following events:

Event: 'connect'

Emitted when a socket connection is successfully established. See connect().

Event: 'data'

• Buffer object

Emitted when data is received. The argument data will be a Buffer or String. Encoding of data is set by socket.setEncoding(). (See the Readable Stream section for more information.)

Note that the data will be lost if there is no listener when a Socket emits a 'data' event.

Event: 'end'

Emitted when the other end of the socket sends a FIN packet.

By default (allowHalfOpen == false) the socket will destroy its file descriptor once it has written out its pending write queue. However, by setting allowHalfOpen == true the socket will not automatically end() its side allowing the user to write arbitrary amounts of data, with the caveat that the user is required to end() their side now.

Event: 'timeout'

Emitted if the socket times out from inactivity. This is only to notify that the socket has been idle. The user must manually close the connection.

See also: socket.setTimeout()

Event: 'drain'

Emitted when the write buffer becomes empty. Can be used to throttle uploads.

See also: the return values of socket.write()

Event: 'error'

• Error object

Emitted when an error occurs. The 'close' event will be called directly following this event.

Event: 'close'

• had_error Boolean true if the socket had a transmission error

Emitted once the socket is fully closed. The argument had_error is a boolean which says if the socket was closed due to a transmission error.

net.isIP(input)

Tests if input is an IP address. Returns 0 for invalid strings, returns 4 for IP version 4 addresses, and returns 6 for IP version 6 addresses.

net.isIPv4(input)

Returns true if input is a version 4 IP address, otherwise returns false.

net.isIPv6(input)

Returns true if input is a version 6 IP address, otherwise returns false.

UDP / Datagram Sockets

Stability: 3 - Stable

Datagram sockets are available through require('dgram').

Important note: the behavior of dgram.Socket#bind() has changed in v0.10 and is always asynchronous now. If you have code that looks like this:

var s = dgram.createSocket('udp4');

s.bind(1234);

s.addMembership('224.0.0.114');

You have to change it to this:

var s = dgram.createSocket('udp4');

s.bind(1234, function() {

s.addMembership('224.0.0.114');

});

dgram.createSocket(type, [callback])

• type String. Either 'udp4' or 'udp6'
• callback Function. Attached as a listener to message events. Optional
• Returns: Socket object

Creates a datagram Socket of the specified types. Valid types are udp4 and udp6.

Takes an optional callback which is added as a listener for message events.

Call socket.bind if you want to receive datagrams. socket.bind() will bind to the "all interfaces" address on a random port (it does the right thing for both udp4 and udp6 sockets). You can then retrieve the address and port with socket.address().address and socket.address().port.

Class: dgram.Socket

The dgram Socket class encapsulates the datagram functionality. It should be created via dgram.createSocket(type, [callback]).

Event: 'message'

• msg Buffer object. The message
• rinfo Object. Remote address information

Emitted when a new datagram is available on a socket. msg is a Buffer and rinfo is an object with the sender's address information and the number of bytes in the datagram.

Event: 'listening'

Emitted when a socket starts listening for datagrams. This happens as soon as UDP sockets are created.

Event: 'close'

Emitted when a socket is closed with close(). No new message events will be emitted on this socket.

Event: 'error'

• exception Error object

Emitted when an error occurs.

socket.send(buf, offset, length, port, address, [callback])

• buf Buffer object. Message to be sent
• offset Integer. Offset in the buffer where the message starts.
• length Integer. Number of bytes in the message.
• port Integer. destination port
• address String. destination IP
• callback Function. Callback when message is done being delivered. Optional.

For UDP sockets, the destination port and IP address must be specified. A string may be supplied for the address parameter, and it will be resolved with DNS. An optional callback may be specified to detect any DNS errors and when buf may be re-used. Note that DNS lookups will delay the time that a send takes place, at least until the next tick. The only way to know for sure that a send has taken place is to use the callback.

If the socket has not been previously bound with a call to bind, it's assigned a random port number and bound to the "all interfaces" address (0.0.0.0 for udp4 sockets, ::0 for udp6 sockets).

Example of sending a UDP packet to a random port on localhost;

var dgram = require('dgram');

var message = new Buffer("Some bytes");

var client = dgram.createSocket("udp4");

client.send(message, 0, message.length, 41234, "localhost", function(err, bytes) {

client.close();

});

A Note about UDP datagram size

The maximum size of an IPv4/v6 datagram depends on the MTU (Maximum Transmission Unit) and on the Payload Length field size.

• The Payload Length field is 16 bits wide, which means that a normal payload cannot be larger than 64K octets including internet header and data (65,507 bytes = 65,535 − 8 bytes UDP header − 20 bytes IP header); this is generally true for loopback interfaces, but such long datagrams are impractical for most hosts and networks.
• The MTU is the largest size a given link layer technology can support for datagrams. For any link, IPv4 mandates a minimum MTU of 68 octets, while the recommended MTU for IPv4 is 576 (typically recommended as the MTU for dial-up type applications), whether they arrive whole or in fragments.
  For IPv6, the minimum MTU is 1280 octets, however, the mandatory minimum fragment reassembly buffer size is 1500 octets. The value of 68 octets is very small, since most current link layer technologies have a minimum MTU of 1500 (like Ethernet).

Note that it's impossible to know in advance the MTU of each link through which a packet might travel, and that generally sending a datagram greater than the (receiver) MTU won't work (the packet gets silently dropped, without informing the source that the data did not reach its intended recipient).

socket.bind(port, [address], [callback])

• port Integer
• address String, Optional
• callback Function, Optional

For UDP sockets, listen for datagrams on a named port and optional address. If address is not specified, the OS will try to listen on all addresses.

The callback argument, if provided, is added as a one-shot 'listening' event listener.

Example of a UDP server listening on port 41234:

var dgram = require("dgram");

var server = dgram.createSocket("udp4");

server.on("message", function (msg, rinfo) {

console.log("server got: " + msg + " from " +

rinfo.address + ":" + rinfo.port);

});

server.on("listening", function () {

var address = server.address();

console.log("server listening " +

address.address + ":" + address.port);

});

server.bind(41234);

// server listening 0.0.0.0:41234

socket.close()

Close the underlying socket and stop listening for data on it.

socket.address()

Returns an object containing the address information for a socket. For UDP sockets, this object will contain address , family and port.

socket.setBroadcast(flag)

• flag Boolean

Sets or clears the SO_BROADCAST socket option. When this option is set, UDP packets may be sent to a local interface's broadcast address.

socket.setTTL(ttl)

• ttl Integer

Sets the IP_TTL socket option. TTL stands for "Time to Live," but in this context it specifies the number of IP hops that a packet is allowed to go through. Each router or gateway that forwards a packet decrements the TTL. If the TTL is decremented to 0 by a router, it will not be forwarded. Changing TTL values is typically done for network probes or when multicasting.

The argument to setTTL() is a number of hops between 1 and 255. The default on most systems is 64.

socket.setMulticastTTL(ttl)

• ttl Integer

Sets the IP_MULTICAST_TTL socket option. TTL stands for "Time to Live," but in this context it specifies the number of IP hops that a packet is allowed to go through, specifically for multicast traffic. Each router or gateway that forwards a packet decrements the TTL. If the TTL is decremented to 0 by a router, it will not be forwarded.

The argument to setMulticastTTL() is a number of hops between 0 and 255. The default on most systems is 1.

socket.setMulticastLoopback(flag)

• flag Boolean

Sets or clears the IP_MULTICAST_LOOP socket option. When this option is set, multicast packets will also be received on the local interface.

socket.addMembership(multicastAddress, [multicastInterface])

• multicastAddress String
• multicastInterface String, Optional

Tells the kernel to join a multicast group with IP_ADD_MEMBERSHIP socket option.

If multicastInterface is not specified, the OS will try to add membership to all valid interfaces.

socket.dropMembership(multicastAddress, [multicastInterface])

• multicastAddress String
• multicastInterface String, Optional

Opposite of addMembership - tells the kernel to leave a multicast group with IP_DROP_MEMBERSHIP socket option. This is automatically called by the kernel when the socket is closed or process terminates, so most apps will never need to call this.

If multicastInterface is not specified, the OS will try to drop membership to all valid interfaces.

socket.unref()

Calling unref on a socket will allow the program to exit if this is the only active socket in the event system. If the socket is already unrefd calling unref again will have no effect.

socket.ref()

Opposite of unref, calling ref on a previously unrefd socket will not let the program exit if it's the only socket left (the default behavior). If the socket is refd calling ref again will have no effect.

DNS

Stability: 3 - Stable

Use require('dns') to access this module. All methods in the dns module use C-Ares except for dns.lookup which uses getaddrinfo(3) in a thread pool. C-Ares is much faster than getaddrinfo but the system resolver is more constant with how other programs operate. When a user does net.connect(80, 'google.com') or http.get({ host: 'google.com' }) the dns.lookup method is used. Users who need to do a large number of look ups quickly should use the methods that go through C-Ares.

Here is an example which resolves 'www.google.com' then reverse resolves the IP addresses which are returned.

var dns = require('dns');

dns.resolve4('www.google.com', function (err, addresses) {

if (err) throw err;

console.log('addresses: ' + JSON.stringify(addresses));

addresses.forEach(function (a) {

dns.reverse(a, function (err, domains) {

if (err) {

throw err;

}

console.log('reverse for ' + a + ': ' + JSON.stringify(domains));

});

});

});

dns.lookup(domain, [family], callback)

Resolves a domain (e.g. 'google.com') into the first found A (IPv4) or AAAA (IPv6) record. The family can be the integer 4 or 6. Defaults to null that indicates both Ip v4 and v6 address family.

The callback has arguments (err, address, family). The address argument is a string representation of a IP v4 or v6 address. The family argument is either the integer 4 or 6 and denotes the family of address (not necessarily the value initially passed to lookup).

On error, err is an Error object, where err.code is the error code. Keep in mind that err.code will be set to 'ENOENT' not only when the domain does not exist but also when the lookup fails in other ways such as no available file descriptors.

dns.resolve(domain, [rrtype], callback)

Resolves a domain (e.g. 'google.com') into an array of the record types specified by rrtype. Valid rrtypes are 'A' (IPV4 addresses, default), 'AAAA' (IPV6 addresses), 'MX' (mail exchange records), 'TXT' (text records), 'SRV' (SRV records), 'PTR' (used for reverse IP lookups), 'NS' (name server records) and 'CNAME' (canonical name records).

The callback has arguments (err, addresses). The type of each item in addresses is determined by the record type, and described in the documentation for the corresponding lookup methods below.

On error, err is an Error object, where err.code is one of the error codes listed below.

dns.resolve4(domain, callback)

The same as dns.resolve(), but only for IPv4 queries (A records). addresses is an array of IPv4 addresses (e.g. ['74.125.79.104', '74.125.79.105', '74.125.79.106']).

dns.resolve6(domain, callback)

The same as dns.resolve4() except for IPv6 queries (an AAAA query).

dns.resolveMx(domain, callback)

The same as dns.resolve(), but only for mail exchange queries (MX records).

addresses is an array of MX records, each with a priority and an exchange attribute (e.g. [{'priority': 10, 'exchange': 'mx.example.com'},...]).

dns.resolveTxt(domain, callback)

The same as dns.resolve(), but only for text queries (TXT records). addresses is an array of the text records available for domain (e.g., ['v=spf1 ip4:0.0.0.0 ~all']).

dns.resolveSrv(domain, callback)

The same as dns.resolve(), but only for service records (SRV records). addresses is an array of the SRV records available for domain. Properties of SRV records are priority, weight, port, and name (e.g., [{'priority': 10, {'weight': 5, 'port': 21223, 'name': 'service.example.com'}, ...]).

dns.resolveNs(domain, callback)

The same as dns.resolve(), but only for name server records (NS records). addresses is an array of the name server records available for domain (e.g., ['ns1.example.com', 'ns2.example.com']).

dns.resolveCname(domain, callback)

The same as dns.resolve(), but only for canonical name records (CNAME records). addresses is an array of the canonical name records available for domain (e.g., ['bar.example.com']).

dns.reverse(ip, callback)

Reverse resolves an ip address to an array of domain names.

The callback has arguments (err, domains).

On error, err is an Error object, where err.code is one of the error codes listed below.

Error codes

Each DNS query can return one of the following error codes:

• dns.NODATA: DNS server returned answer with no data.
• dns.FORMERR: DNS server claims query was misformatted.
• dns.SERVFAIL: DNS server returned general failure.
• dns.NOTFOUND: Domain name not found.
• dns.NOTIMP: DNS server does not implement requested operation.
• dns.REFUSED: DNS server refused query.
• dns.BADQUERY: Misformatted DNS query.
• dns.BADNAME: Misformatted domain name.
• dns.BADFAMILY: Unsupported address family.
• dns.BADRESP: Misformatted DNS reply.
• dns.CONNREFUSED: Could not contact DNS servers.
• dns.TIMEOUT: Timeout while contacting DNS servers.
• dns.EOF: End of file.
• dns.FILE: Error reading file.
• dns.NOMEM: Out of memory.
• dns.DESTRUCTION: Channel is being destroyed.
• dns.BADSTR: Misformatted string.
• dns.BADFLAGS: Illegal flags specified.
• dns.NONAME: Given hostname is not numeric.
• dns.BADHINTS: Illegal hints flags specified.
• dns.NOTINITIALIZED: c-ares library initialization not yet performed.
• dns.LOADIPHLPAPI: Error loading iphlpapi.dll.
• dns.ADDRGETNETWORKPARAMS: Could not find GetNetworkParams function.
• dns.CANCELLED: DNS query cancelled.

HTTP

Stability: 3 - Stable

To use the HTTP server and client one must require('http').

The HTTP interfaces in Node are designed to support many features of the protocol which have been traditionally difficult to use. In particular, large, possibly chunk-encoded, messages. The interface is careful to never buffer entire requests or responses--the user is able to stream data.

HTTP message headers are represented by an object like this:

{ 'content-length': '123',

'content-type': 'text/plain',

'connection': 'keep-alive',

'accept': '*/*' }

Keys are lowercased. Values are not modified.

In order to support the full spectrum of possible HTTP applications, Node's HTTP API is very low-level. It deals with stream handling and message parsing only. It parses a message into headers and body but it does not parse the actual headers or the body.

http.STATUS_CODES

• Object

A collection of all the standard HTTP response status codes, and the short description of each. For example, http.STATUS_CODES[404] === 'Not Found'.

http.createServer([requestListener])

Returns a new web server object.

The requestListener is a function which is automatically added to the 'request' event.

http.createClient([port], [host])

This function is deprecated;

please use #http_http_request_options_callback instead. Constructs a new HTTP client. port and host refer to the server to be connected to.

Class: http.Server

This is an EventEmitter with the following events:

Event: 'request'

function (request, response) { }

Emitted each time there is a request. Note that there may be multiple requests per connection (in the case of keep-alive connections). request is an instance of http.IncomingMessage and response is an instance of http.ServerResponse

Event: 'connection'

function (socket) { }

When a new TCP stream is established. socket is an object of type net.Socket. Usually users will not want to access this event. The socket can also be accessed at request.connection.

Event: 'close'

function () { }

Emitted when the server closes.

Event: 'checkContinue'

function (request, response) { }

Emitted each time a request with an http Expect: 100-continue is received. If this event isn't listened for, the server will automatically respond with a 100 Continue as appropriate.

Handling this event involves calling response.writeContinue if the client should continue to send the request body, or generating an appropriate HTTP response (e.g., 400 Bad Request) if the client should not continue to send the request body.

Note that when this event is emitted and handled, the request event will not be emitted.

Event: 'connect'

function (request, socket, head) { }

Emitted each time a client requests a http CONNECT method. If this event isn't listened for, then clients requesting a CONNECT method will have their connections closed.

• request is the arguments for the http request, as it is in the request event.
• socket is the network socket between the server and client.
• head is an instance of Buffer, the first packet of the tunneling stream, this may be empty.

After this event is emitted, the request's socket will not have a data event listener, meaning you will need to bind to it in order to handle data sent to the server on that socket.

Event: 'upgrade'

function (request, socket, head) { }

Emitted each time a client requests a http upgrade. If this event isn't listened for, then clients requesting an upgrade will have their connections closed.

• request is the arguments for the http request, as it is in the request event.
• socket is the network socket between the server and client.
• head is an instance of Buffer, the first packet of the upgraded stream, this may be empty.

After this event is emitted, the request's socket will not have a data event listener, meaning you will need to bind to it in order to handle data sent to the server on that socket.

Event: 'clientError'

function (exception, socket) { }

If a client connection emits an 'error' event - it will forwarded here.

socket is the net.Socket object that the error originated from.

server.listen(port, [hostname], [backlog], [callback])

Begin accepting connections on the specified port and hostname. If the hostname is omitted, the server will accept connections directed to any IPv4 address (INADDR_ANY).

To listen to a unix socket, supply a filename instead of port and hostname.

Backlog is the maximum length of the queue of pending connections. The actual length will be determined by your OS through sysctl settings such as tcp_max_syn_backlog and somaxconn on linux. The default value of this parameter is 511 (not 512).

This function is asynchronous. The last parameter callback will be added as a listener for the 'listening' event. See also net.Server.listen(port).

server.listen(path, [callback])

Start a UNIX socket server listening for connections on the given path.

This function is asynchronous. The last parameter callback will be added as a listener for the 'listening' event. See also net.Server.listen(path).

server.listen(handle, [callback])

• handle Object
• callback Function

The handle object can be set to either a server or socket (anything with an underlying _handle member), or a {fd: <n>} object.

This will cause the server to accept connections on the specified handle, but it is presumed that the file descriptor or handle has already been bound to a port or domain socket.

Listening on a file descriptor is not supported on Windows.

This function is asynchronous. The last parameter callback will be added as a listener for the 'listening' event. See also net.Server.listen().

server.close([callback])

Stops the server from accepting new connections. See net.Server.close().

server.maxHeadersCount

Limits maximum incoming headers count, equal to 1000 by default. If set to 0 - no limit will be applied.

server.setTimeout(msecs, callback)

• msecs Number
• callback Function

Sets the timeout value for sockets, and emits a 'timeout' event on the Server object, passing the socket as an argument, if a timeout occurs.

If there is a 'timeout' event listener on the Server object, then it will be called with the timed-out socket as an argument.

By default, the Server's timeout value is 2 minutes, and sockets are destroyed automatically if they time out. However, if you assign a callback to the Server's 'timeout' event, then you are responsible for handling socket timeouts.

server.timeout

• Number Default = 120000 (2 minutes)

The number of milliseconds of inactivity before a socket is presumed to have timed out.

Note that the socket timeout logic is set up on connection, so changing this value only affects new connections to the server, not any existing connections.

Set to 0 to disable any kind of automatic timeout behavior on incoming connections.

Class: http.ServerResponse

This object is created internally by a HTTP server--not by the user. It is passed as the second parameter to the 'request' event.

The response implements the Writable Stream interface. This is an EventEmitter with the following events:

Event: 'close'

function () { }

Indicates that the underlaying connection was terminated before response.end() was called or able to flush.

response.writeContinue()

Sends a HTTP/1.1 100 Continue message to the client, indicating that the request body should be sent. See the 'checkContinue' event on Server.

response.writeHead(statusCode, [reasonPhrase], [headers])

Sends a response header to the request. The status code is a 3-digit HTTP status code, like 404. The last argument, headers, are the response headers. Optionally one can give a human-readable reasonPhrase as the second argument.

Example:

var body = 'hello world';

response.writeHead(200, {

'Content-Length': body.length,

'Content-Type': 'text/plain' });

This method must only be called once on a message and it must be called before response.end() is called.

If you call response.write() or response.end() before calling this, the implicit/mutable headers will be calculated and call this function for you.

Note: that Content-Length is given in bytes not characters. The above example works because the string 'hello world' contains only single byte characters. If the body contains higher coded characters then Buffer.byteLength() should be used to determine the number of bytes in a given encoding. And Node does not check whether Content-Length and the length of the body which has been transmitted are equal or not.

response.setTimeout(msecs, callback)

• msecs Number
• callback Function

Sets the Socket's timeout value to msecs. If a callback is provided, then it is added as a listener on the 'timeout' event on the response object.

If no 'timeout' listener is added to the request, the response, or the server, then sockets are destroyed when they time out. If you assign a handler on the request, the response, or the server's 'timeout' events, then it is your responsibility to handle timed out sockets.

response.statusCode

When using implicit headers (not calling response.writeHead() explicitly), this property controls the status code that will be sent to the client when the headers get flushed.

Example:

response.statusCode = 404;

After response header was sent to the client, this property indicates the status code which was sent out.

response.setHeader(name, value)

Sets a single header value for implicit headers. If this header already exists in the to-be-sent headers, its value will be replaced. Use an array of strings here if you need to send multiple headers with the same name.

Example:

response.setHeader("Content-Type", "text/html");

or

response.setHeader("Set-Cookie", ["type=ninja", "language=javascript"]);

response.headersSent

Boolean (read-only). True if headers were sent, false otherwise.

response.sendDate

When true, the Date header will be automatically generated and sent in the response if it is not already present in the headers. Defaults to true.

This should only be disabled for testing; HTTP requires the Date header in responses.

response.getHeader(name)

Reads out a header that's already been queued but not sent to the client. Note that the name is case insensitive. This can only be called before headers get implicitly flushed.

Example:

var contentType = response.getHeader('content-type');

response.removeHeader(name)

Removes a header that's queued for implicit sending.

Example:

response.removeHeader("Content-Encoding");

response.write(chunk, [encoding])

If this method is called and response.writeHead() has not been called, it will switch to implicit header mode and flush the implicit headers.

This sends a chunk of the response body. This method may be called multiple times to provide successive parts of the body.

chunk can be a string or a buffer. If chunk is a string, the second parameter specifies how to encode it into a byte stream. By default the encoding is 'utf8'.

Note: This is the raw HTTP body and has nothing to do with higher-level multi-part body encodings that may be used.

The first time response.write() is called, it will send the buffered header information and the first body to the client. The second time response.write() is called, Node assumes you're going to be streaming data, and sends that separately. That is, the response is buffered up to the first chunk of body.

Returns true if the entire data was flushed successfully to the kernel buffer. Returns false if all or part of the data was queued in user memory. 'drain' will be emitted when the buffer is again free.

response.addTrailers(headers)

This method adds HTTP trailing headers (a header but at the end of the message) to the response.

Trailers will only be emitted if chunked encoding is used for the response; if it is not (e.g., if the request was HTTP/1.0), they will be silently discarded.

Note that HTTP requires the Trailer header to be sent if you intend to emit trailers, with a list of the header fields in its value. E.g.,

response.writeHead(200, { 'Content-Type': 'text/plain',

'Trailer': 'Content-MD5' });

response.write(fileData);

response.addTrailers({'Content-MD5': "7895bf4b8828b55ceaf47747b4bca667"});

response.end();

response.end([data], [encoding])

This method signals to the server that all of the response headers and body have been sent; that server should consider this message complete. The method, response.end(), MUST be called on each response.

If data is specified, it is equivalent to calling response.write(data, encoding) followed by response.end().

http.request(options, callback)

Node maintains several connections per server to make HTTP requests. This function allows one to transparently issue requests.

options can be an object or a string. If options is a string, it is automatically parsed with url.parse().

Options:

• host: A domain name or IP address of the server to issue the request to. Defaults to 'localhost'.
• hostname: To support url.parse() hostname is preferred over host
• port: Port of remote server. Defaults to 80.
• localAddress: Local interface to bind for network connections.
• socketPath: Unix Domain Socket (use one of host:port or socketPath)
• method: A string specifying the HTTP request method. Defaults to 'GET'.
• path: Request path. Defaults to '/'. Should include query string if any. E.G. '/index.html?page=12'
• headers: An object containing request headers.
• auth: Basic authentication i.e. 'user:password' to compute an Authorization header.
• agent: Controls Agent behavior. When an Agent is used request will default to Connection: keep-alive. Possible values:
  • undefined (default): use global Agent for this host and port.
  • Agent object: explicitly use the passed in Agent.
  • false: opts out of connection pooling with an Agent, defaults request to Connection: close.

http.request() returns an instance of the http.ClientRequest class. The ClientRequest instance is a writable stream. If one needs to upload a file with a POST request, then write to the ClientRequest object.

Example:

var options = {

hostname: 'www.google.com',

port: 80,

path: '/upload',

method: 'POST'

};

var req = http.request(options, function(res) {

console.log('STATUS: ' + res.statusCode);

console.log('HEADERS: ' + JSON.stringify(res.headers));

res.setEncoding('utf8');

res.on('data', function (chunk) {

console.log('BODY: ' + chunk);

});

});

req.on('error', function(e) {

console.log('problem with request: ' + e.message);

});

// write data to request body

req.write('data\n');

req.write('data\n');

req.end();

Note that in the example req.end() was called. With http.request() one must always call req.end() to signify that you're done with the request - even if there is no data being written to the request body.

If any error is encountered during the request (be that with DNS resolution, TCP level errors, or actual HTTP parse errors) an 'error' event is emitted on the returned request object.

There are a few special headers that should be noted.

• Sending a 'Connection: keep-alive' will notify Node that the connection to the server should be persisted until the next request.
• Sending a 'Content-length' header will disable the default chunked encoding.
• Sending an 'Expect' header will immediately send the request headers. Usually, when sending 'Expect: 100-continue', you should both set a timeout and listen for the continue event. See RFC2616 Section 8.2.3 for more information.
• Sending an Authorization header will override using the auth option to compute basic authentication.

http.get(options, callback)

Since most requests are GET requests without bodies, Node provides this convenience method. The only difference between this method and http.request() is that it sets the method to GET and calls req.end() automatically.

Example:

http.get("http://www.google.com/index.html", function(res) {

console.log("Got response: " + res.statusCode);

}).on('error', function(e) {

console.log("Got error: " + e.message);

});

Class: http.Agent

In node 0.5.3+ there is a new implementation of the HTTP Agent which is used for pooling sockets used in HTTP client requests.

Previously, a single agent instance helped pool for a single host+port. The current implementation now holds sockets for any number of hosts.

The current HTTP Agent also defaults client requests to using Connection:keep-alive. If no pending HTTP requests are waiting on a socket to become free the socket is closed. This means that node's pool has the benefit of keep-alive when under load but still does not require developers to manually close the HTTP clients using keep-alive.

Sockets are removed from the agent's pool when the socket emits either a "close" event or a special "agentRemove" event. This means that if you intend to keep one HTTP request open for a long time and don't want it to stay in the pool you can do something along the lines of:

http.get(options, function(res) {

// Do stuff

}).on("socket", function (socket) {

socket.emit("agentRemove");

});

Alternatively, you could just opt out of pooling entirely using agent:false:

http.get({hostname:'localhost', port:80, path:'/', agent:false}, function (res) {

// Do stuff

})

agent.maxSockets

By default set to 5. Determines how many concurrent sockets the agent can have open per host.

agent.sockets

An object which contains arrays of sockets currently in use by the Agent. Do not modify.

agent.requests

An object which contains queues of requests that have not yet been assigned to sockets. Do not modify.

http.globalAgent

Global instance of Agent which is used as the default for all http client requests.

Class: http.ClientRequest

This object is created internally and returned from http.request(). It represents an in-progress request whose header has already been queued. The header is still mutable using the setHeader(name, value), getHeader(name), removeHeader(name) API. The actual header will be sent along with the first data chunk or when closing the connection.

To get the response, add a listener for 'response' to the request object. 'response' will be emitted from the request object when the response headers have been received. The 'response' event is executed with one argument which is an instance of http.IncomingMessage.

During the 'response' event, one can add listeners to the response object; particularly to listen for the 'data' event. Note that the 'response' event is called before any part of the response body is received, so there is no need to worry about racing to catch the first part of the body. As long as a listener for 'data' is added during the 'response' event, the entire body will be caught.

// Good

request.on('response', function (response) {

response.on('data', function (chunk) {

console.log('BODY: ' + chunk);

});

});

// Bad - misses all or part of the body

request.on('response', function (response) {

setTimeout(function () {

response.on('data', function (chunk) {

console.log('BODY: ' + chunk);

});

}, 10);

});

Note: Node does not check whether Content-Length and the length of the body which has been transmitted are equal or not.

The request implements the Writable Stream interface. This is an EventEmitter with the following events:

Event 'response'

function (response) { }

Emitted when a response is received to this request. This event is emitted only once. The response argument will be an instance of http.IncomingMessage.

Options:

• host: A domain name or IP address of the server to issue the request to.
• port: Port of remote server.
• socketPath: Unix Domain Socket (use one of host:port or socketPath)

Event: 'socket'

function (socket) { }

Emitted after a socket is assigned to this request.

Event: 'connect'

function (response, socket, head) { }

Emitted each time a server responds to a request with a CONNECT method. If this event isn't being listened for, clients receiving a CONNECT method will have their connections closed.

A client server pair that show you how to listen for the connect event.

var http = require('http');

var net = require('net');

var url = require('url');

// Create an HTTP tunneling proxy

var proxy = http.createServer(function (req, res) {

res.writeHead(200, {'Content-Type': 'text/plain'});

res.end('okay');

});

proxy.on('connect', function(req, cltSocket, head) {

// connect to an origin server

var srvUrl = url.parse('http://' + req.url);

var srvSocket = net.connect(srvUrl.port, srvUrl.hostname, function() {

cltSocket.write('HTTP/1.1 200 Connection Established\r\n' +

'Proxy-agent: Node-Proxy\r\n' +

'\r\n');

srvSocket.write(head);

srvSocket.pipe(cltSocket);

cltSocket.pipe(srvSocket);

});

});

// now that proxy is running

proxy.listen(1337, '127.0.0.1', function() {

// make a request to a tunneling proxy

var options = {

port: 1337,

hostname: '127.0.0.1',

method: 'CONNECT',

path: 'www.google.com:80'

};

var req = http.request(options);

req.end();

req.on('connect', function(res, socket, head) {

console.log('got connected!');

// make a request over an HTTP tunnel

socket.write('GET / HTTP/1.1\r\n' +

'Host: www.google.com:80\r\n' +

'Connection: close\r\n' +

'\r\n');

socket.on('data', function(chunk) {

console.log(chunk.toString());

});

socket.on('end', function() {

proxy.close();

});

});

});

Event: 'upgrade'

function (response, socket, head) { }

Emitted each time a server responds to a request with an upgrade. If this event isn't being listened for, clients receiving an upgrade header will have their connections closed.

A client server pair that show you how to listen for the upgrade event.

var http = require('http');

// Create an HTTP server

var srv = http.createServer(function (req, res) {

res.writeHead(200, {'Content-Type': 'text/plain'});

res.end('okay');

});

srv.on('upgrade', function(req, socket, head) {

socket.write('HTTP/1.1 101 Web Socket Protocol Handshake\r\n' +

'Upgrade: WebSocket\r\n' +

'Connection: Upgrade\r\n' +

'\r\n');

socket.pipe(socket); // echo back

});

// now that server is running

srv.listen(1337, '127.0.0.1', function() {

// make a request

var options = {

port: 1337,

hostname: '127.0.0.1',

headers: {

'Connection': 'Upgrade',

'Upgrade': 'websocket'

}

};

var req = http.request(options);

req.end();

req.on('upgrade', function(res, socket, upgradeHead) {

console.log('got upgraded!');

socket.end();

process.exit(0);

});

});

Event: 'continue'

function () { }

Emitted when the server sends a '100 Continue' HTTP response, usually because the request contained 'Expect: 100-continue'. This is an instruction that the client should send the request body.

request.write(chunk, [encoding])

Sends a chunk of the body. By calling this method many times, the user can stream a request body to a server--in that case it is suggested to use the ['Transfer-Encoding', 'chunked'] header line when creating the request.

The chunk argument should be a buffer or a string.

The encoding argument is optional and only applies when chunk is a string. Defaults to 'utf8'.

request.end([data], [encoding])

Finishes sending the request. If any parts of the body are unsent, it will flush them to the stream. If the request is chunked, this will send the terminating '0\r\n\r\n'.

If data is specified, it is equivalent to calling request.write(data, encoding) followed by request.end().

request.abort()

Aborts a request. (New since v0.3.8.)

request.setTimeout(timeout, [callback])

Once a socket is assigned to this request and is connected socket.setTimeout() will be called.

request.setNoDelay([noDelay])

Once a socket is assigned to this request and is connected socket.setNoDelay() will be called.

request.setSocketKeepAlive([enable], [initialDelay])

Once a socket is assigned to this request and is connected socket.setKeepAlive() will be called.

http.IncomingMessage

An IncomingMessage object is created by http.Server or http.ClientRequest and passed as the first argument to the 'request' and 'response' event respectively. It may be used to access response status, headers and data.

It implements the Readable Stream interface. http.IncomingMessage is an EventEmitter with the following events:

Event: 'data'

function (chunk) { }

Emitted when a piece of the message body is received. The chunk is a string if an encoding has been set with message.setEncoding(), otherwise it's a buffer.

Note that the data will be lost if there is no listener when a IncomingMessage emits a 'data' event.

Event: 'end'

function () { }

Emitted exactly once for each response. After that, no more 'data' events will be emitted on the response.

Event: 'close'

function () { }

Indicates that the underlaying connection was terminated before response.end() was called or able to flush.

Just like 'end', this event occurs only once per response, and no more 'data' events will fire afterwards. See [http.ServerResponse][]'s 'close' event for more information.

message.httpVersion

In case of server request, the HTTP version sent by the client. In the case of client response, the HTTP version of the connected-to server. Probably either '1.1' or '1.0'.

Also response.httpVersionMajor is the first integer and response.httpVersionMinor is the second.

message.headers

The request/response headers object.

Read only map of header names and values. Header names are lower-cased. Example:

// Prints something like:

//

// { 'user-agent': 'curl/7.22.0',

// host: '127.0.0.1:8000',

// accept: '*/*' }

console.log(request.headers);

message.trailers

The request/response trailers object. Only populated after the 'end' event.

message.setTimeout(msecs, callback)

• msecs Number
• callback Function

Calls message.connection.setTimeout(msecs, callback).

message.setEncoding([encoding])

Set the encoding for data emitted by the 'data' event. See stream.setEncoding() for more information.

Should be set before any 'data' events have been emitted.

message.pause()

Pauses request/response from emitting events. Useful to throttle back a download.

message.resume()

Resumes a paused request/response.

message.method

Only valid for request obtained from http.Server.

The request method as a string. Read only. Example: 'GET', 'DELETE'.

message.url

Only valid for request obtained from http.Server.

Request URL string. This contains only the URL that is present in the actual HTTP request. If the request is:

GET /status?name=ryan HTTP/1.1\r\n

Accept: text/plain\r\n

\r\n

Then request.url will be:

'/status?name=ryan'

If you would like to parse the URL into its parts, you can use require('url').parse(request.url). Example:

node> require('url').parse('/status?name=ryan')

{ href: '/status?name=ryan',

search: '?name=ryan',

query: 'name=ryan',

pathname: '/status' }

If you would like to extract the params from the query string, you can use the require('querystring').parse function, or pass true as the second argument to require('url').parse. Example:

node> require('url').parse('/status?name=ryan', true)

{ href: '/status?name=ryan',

search: '?name=ryan',

query: { name: 'ryan' },

pathname: '/status' }

message.statusCode

Only valid for response obtained from http.ClientRequest.

The 3-digit HTTP response status code. E.G. 404.

message.socket

The net.Socket object associated with the connection.

With HTTPS support, use request.connection.verifyPeer() and request.connection.getPeerCertificate() to obtain the client's authentication details.

HTTPS

Stability: 3 - Stable

HTTPS is the HTTP protocol over TLS/SSL. In Node this is implemented as a separate module.

Class: https.Server

This class is a subclass of tls.Server and emits events same as http.Server. See http.Server for more information.

https.createServer(options, [requestListener])

Returns a new HTTPS web server object. The options is similar to tls.createServer(). The requestListener is a function which is automatically added to the 'request' event.

Example:

// curl -k https://localhost:8000/

var https = require('https');

var fs = require('fs');

var options = {

key: fs.readFileSync('test/fixtures/keys/agent2-key.pem'),

cert: fs.readFileSync('test/fixtures/keys/agent2-cert.pem')

};

https.createServer(options, function (req, res) {

res.writeHead(200);

res.end("hello world\n");

}).listen(8000);

Or

var https = require('https');

var fs = require('fs');

var options = {

pfx: fs.readFileSync('server.pfx')

};

https.createServer(options, function (req, res) {

res.writeHead(200);

res.end("hello world\n");

}).listen(8000);

server.listen(handle, [callback])

See http.listen() for details.

server.close([callback])

See http.close() for details.

https.request(options, callback)

Makes a request to a secure web server.

options can be an object or a string. If options is a string, it is automatically parsed with url.parse().

All options from http.request() are valid.

Example:

var https = require('https');

var options = {

hostname: 'encrypted.google.com',

port: 443,

path: '/',

method: 'GET'

};

var req = https.request(options, function(res) {

console.log("statusCode: ", res.statusCode);

console.log("headers: ", res.headers);

res.on('data', function(d) {

process.stdout.write(d);

});

});

req.end();

req.on('error', function(e) {

console.error(e);

});

The options argument has the following options

• host: A domain name or IP address of the server to issue the request to. Defaults to 'localhost'.
• hostname: To support url.parse() hostname is preferred over host
• port: Port of remote server. Defaults to 443.
• method: A string specifying the HTTP request method. Defaults to 'GET'.
• path: Request path. Defaults to '/'. Should include query string if any. E.G. '/index.html?page=12'
• headers: An object containing request headers.
• auth: Basic authentication i.e. 'user:password' to compute an Authorization header.
• agent: Controls Agent behavior. When an Agent is used request will default to Connection: keep-alive. Possible values:
  • undefined (default): use globalAgent for this host and port.
  • Agent object: explicitly use the passed in Agent.
  • false: opts out of connection pooling with an Agent, defaults request to Connection: close.

The following options from tls.connect() can also be specified. However, a globalAgent silently ignores these.

• pfx: Certificate, Private key and CA certificates to use for SSL. Default null.
• key: Private key to use for SSL. Default null.
• passphrase: A string of passphrase for the private key or pfx. Default null.
• cert: Public x509 certificate to use. Default null.
• ca: An authority certificate or array of authority certificates to check the remote host against.
• ciphers: A string describing the ciphers to use or exclude. Consult http://www.openssl.org/docs/apps/ciphers.html#CIPHER_LIST_FORMAT for details on the format.
• rejectUnauthorized: If true, the server certificate is verified against the list of supplied CAs. An 'error' event is emitted if verification fails. Verification happens at the connection level, before the HTTP request is sent. Default true.

In order to specify these options, use a custom Agent.

Example:

var options = {

hostname: 'encrypted.google.com',

port: 443,

path: '/',

method: 'GET',

key: fs.readFileSync('test/fixtures/keys/agent2-key.pem'),

cert: fs.readFileSync('test/fixtures/keys/agent2-cert.pem')

};

options.agent = new https.Agent(options);

var req = https.request(options, function(res) {

...

}

Or does not use an Agent.

Example:

var options = {

hostname: 'encrypted.google.com',

port: 443,

path: '/',

method: 'GET',

key: fs.readFileSync('test/fixtures/keys/agent2-key.pem'),

cert: fs.readFileSync('test/fixtures/keys/agent2-cert.pem'),

agent: false

};

var req = https.request(options, function(res) {

...

}

https.get(options, callback)

Like http.get() but for HTTPS.

options can be an object or a string. If options is a string, it is automatically parsed with url.parse().

Example:

var https = require('https');

https.get('https://encrypted.google.com/', function(res) {

console.log("statusCode: ", res.statusCode);

console.log("headers: ", res.headers);

res.on('data', function(d) {

process.stdout.write(d);

});

}).on('error', function(e) {

console.error(e);

});

Class: https.Agent

An Agent object for HTTPS similar to http.Agent. See https.request() for more information.

https.globalAgent

Global instance of https.Agent for all HTTPS client requests.

URL

Stability: 3 - Stable

This module has utilities for URL resolution and parsing. Call require('url') to use it.

Parsed URL objects have some or all of the following fields, depending on whether or not they exist in the URL string. Any parts that are not in the URL string will not be in the parsed object. Examples are shown for the URL

'http://user:pass@host.com:8080/p/a/t/h?query=string#hash'

• href: The full URL that was originally parsed. Both the protocol and host are lowercased.
  Example: 'http://user:pass@host.com:8080/p/a/t/h?query=string#hash'
• protocol: The request protocol, lowercased.
  Example: 'http:'
• host: The full lowercased host portion of the URL, including port information.
  Example: 'host.com:8080'
• auth: The authentication information portion of a URL.
  Example: 'user:pass'
• hostname: Just the lowercased hostname portion of the host.
  Example: 'host.com'
• port: The port number portion of the host.
  Example: '8080'
• pathname: The path section of the URL, that comes after the host and before the query, including the initial slash if present.
  Example: '/p/a/t/h'
• search: The 'query string' portion of the URL, including the leading question mark.
  Example: '?query=string'
• path: Concatenation of pathname and search.
  Example: '/p/a/t/h?query=string'
• query: Either the 'params' portion of the query string, or a querystring-parsed object.
  Example: 'query=string' or {'query':'string'}
• hash: The 'fragment' portion of the URL including the pound-sign.
  Example: '#hash'

The following methods are provided by the URL module:

url.parse(urlStr, [parseQueryString], [slashesDenoteHost])

Take a URL string, and return an object.

Pass true as the second argument to also parse the query string using the querystring module. Defaults to false.

Pass true as the third argument to treat //foo/bar as { host: 'foo', pathname: '/bar' } rather than { pathname: '//foo/bar' }. Defaults to false.

url.format(urlObj)

Take a parsed URL object, and return a formatted URL string.

• href will be ignored.
• protocolis treated the same with or without the trailing : (colon).
  • The protocols http, https, ftp, gopher, file will be postfixed with :// (colon-slash-slash).
  • All other protocols mailto, xmpp, aim, sftp, foo, etc will be postfixed with : (colon)
• auth will be used if present.
• hostname will only be used if host is absent.
• port will only be used if host is absent.
• host will be used in place of hostname and port
• pathname is treated the same with or without the leading / (slash)
• search will be used in place of query
• query (object; see querystring) will only be used if search is absent.
• search is treated the same with or without the leading ? (question mark)
• hash is treated the same with or without the leading # (pound sign, anchor)

url.resolve(from, to)

Take a base URL, and a href URL, and resolve them as a browser would for an anchor tag. Examples:

url.resolve('/one/two/three', 'four') // '/one/two/four'

url.resolve('http://example.com/', '/one') // 'http://example.com/one'

url.resolve('http://example.com/one', '/two') // 'http://example.com/two'

Query String

Stability: 3 - Stable

This module provides utilities for dealing with query strings. It provides the following methods:

querystring.stringify(obj, [sep], [eq])

Serialize an object to a query string. Optionally override the default separator ('&') and assignment ('=') characters.

Example:

querystring.stringify({ foo: 'bar', baz: ['qux', 'quux'], corge: '' })

// returns

'foo=bar&baz=qux&baz=quux&corge='

querystring.stringify({foo: 'bar', baz: 'qux'}, ';', ':')

// returns

'foo:bar;baz:qux'

querystring.parse(str, [sep], [eq], [options])

Deserialize a query string to an object. Optionally override the default separator ('&') and assignment ('=') characters.

Options object may contain maxKeys property (equal to 1000 by default), it'll be used to limit processed keys. Set it to 0 to remove key count limitation.

Example:

querystring.parse('foo=bar&baz=qux&baz=quux&corge')

// returns

{ foo: 'bar', baz: ['qux', 'quux'], corge: '' }

querystring.escape

The escape function used by querystring.stringify, provided so that it could be overridden if necessary.

querystring.unescape

The unescape function used by querystring.parse, provided so that it could be overridden if necessary.

punycode

Stability: 2 - Unstable

Punycode.js is bundled with Node.js v0.6.2+. Use require('punycode') to access it. (To use it with other Node.js versions, use npm to install the punycode module first.)

punycode.decode(string)

Converts a Punycode string of ASCII code points to a string of Unicode code points.

// decode domain name parts

punycode.decode('maana-pta'); // 'mañana'

punycode.decode('--dqo34k'); // '☃-⌘'

punycode.encode(string)

Converts a string of Unicode code points to a Punycode string of ASCII code points.

// encode domain name parts

punycode.encode('mañana'); // 'maana-pta'

punycode.encode('☃-⌘'); // '--dqo34k'

punycode.toUnicode(domain)

Converts a Punycode string representing a domain name to Unicode. Only the Punycoded parts of the domain name will be converted, i.e. it doesn't matter if you call it on a string that has already been converted to Unicode.

// decode domain names

punycode.toUnicode('xn--maana-pta.com'); // 'mañana.com'

punycode.toUnicode('xn----dqo34k.com'); // '☃-⌘.com'

punycode.toASCII(domain)

Converts a Unicode string representing a domain name to Punycode. Only the non-ASCII parts of the domain name will be converted, i.e. it doesn't matter if you call it with a domain that's already in ASCII.

// encode domain names

punycode.toASCII('mañana.com'); // 'xn--maana-pta.com'

punycode.toASCII('☃-⌘.com'); // 'xn----dqo34k.com'

punycode.ucs2

punycode.ucs2.decode(string)

Creates an array containing the decimal code points of each Unicode character in the string. While JavaScript uses UCS-2 internally, this function will convert a pair of surrogate halves (each of which UCS-2 exposes as separate characters) into a single code point, matching UTF-16.

punycode.ucs2.decode('abc'); // [97, 98, 99]

// surrogate pair for U+1D306 tetragram for centre:

punycode.ucs2.decode('\uD834\uDF06'); // [0x1D306]

punycode.ucs2.encode(codePoints)

Creates a string based on an array of decimal code points.

punycode.ucs2.encode([97, 98, 99]); // 'abc'

punycode.ucs2.encode([0x1D306]); // '\uD834\uDF06'

punycode.version

A string representing the current Punycode.js version number.

Readline

Stability: 2 - Unstable

To use this module, do require('readline'). Readline allows reading of a stream (such as process.stdin) on a line-by-line basis.

Note that once you've invoked this module, your node program will not terminate until you've closed the interface. Here's how to allow your program to gracefully exit:

var readline = require('readline');

var rl = readline.createInterface({

input: process.stdin,

output: process.stdout

});

rl.question("What do you think of node.js? ", function(answer) {

// TODO: Log the answer in a database

console.log("Thank you for your valuable feedback:", answer);

rl.close();

});

readline.createInterface(options)

Creates a readline Interface instance. Accepts an "options" Object that takes the following values:

• input - the readable stream to listen to (Required).
• output - the writable stream to write readline data to (Required).
• completer - an optional function that is used for Tab autocompletion. See below for an example of using this.
• terminal - pass true if the input and output streams should be treated like a TTY, and have ANSI/VT100 escape codes written to it. Defaults to checking isTTY on the output stream upon instantiation.

The completer function is given a the current line entered by the user, and is supposed to return an Array with 2 entries:

1. An Array with matching entries for the completion.
2. The substring that was used for the matching.

Which ends up looking something like: [[substr1, substr2, ...], originalsubstring].

Example:

function completer(line) {

var completions = '.help .error .exit .quit .q'.split(' ')

var hits = completions.filter(function(c) { return c.indexOf(line) == 0 })

// show all completions if none found

return [hits.length ? hits : completions, line]

}

Also completer can be run in async mode if it accepts two arguments:

function completer(linePartial, callback) {

callback(null, [['123'], linePartial]);

}

createInterface is commonly used with process.stdin and process.stdout in order to accept user input:

var readline = require('readline');

var rl = readline.createInterface({

input: process.stdin,

output: process.stdout

});

Once you have a readline instance, you most commonly listen for the "line" event.

If terminal is true for this instance then the output stream will get the best compatibility if it defines an output.columns property, and fires a "resize" event on the output if/when the columns ever change (process.stdout does this automatically when it is a TTY).

Class: Interface

The class that represents a readline interface with an input and output stream.

rl.setPrompt(prompt, length)

Sets the prompt, for example when you run node on the command line, you see > , which is node's prompt.

rl.prompt([preserveCursor])

Readies readline for input from the user, putting the current setPrompt options on a new line, giving the user a new spot to write. Set preserveCursor to true to prevent the cursor placement being reset to 0.

This will also resume the input stream used with createInterface if it has been paused.

rl.question(query, callback)

Prepends the prompt with query and invokes callback with the user's response. Displays the query to the user, and then invokes callback with the user's response after it has been typed.

This will also resume the input stream used with createInterface if it has been paused.

Example usage:

interface.question('What is your favorite food?', function(answer) {

console.log('Oh, so your favorite food is ' + answer);

});

rl.pause()

Pauses the readline input stream, allowing it to be resumed later if needed.

rl.resume()

Resumes the readline input stream.

rl.close()

Closes the Interface instance, relinquishing control on the input and output streams. The "close" event will also be emitted.

rl.write(data, [key])

Writes data to output stream. key is an object literal to represent a key sequence; available if the terminal is a TTY.

This will also resume the input stream if it has been paused.

Example:

rl.write('Delete me!');

// Simulate ctrl+u to delete the line written previously

rl.write(null, {ctrl: true, name: 'u'});

Events

Event: 'line'

function (line) {}

Emitted whenever the input stream receives a \n, usually received when the user hits enter, or return. This is a good hook to listen for user input.

Example of listening for line:

rl.on('line', function (cmd) {

console.log('You just typed: '+cmd);

});

Event: 'pause'

function () {}

Emitted whenever the input stream is paused.

Also emitted whenever the input stream is not paused and receives the SIGCONT event. (See events SIGTSTP and SIGCONT)

Example of listening for pause:

rl.on('pause', function() {

console.log('Readline paused.');

});

Event: 'resume'

function () {}

Emitted whenever the input stream is resumed.

Example of listening for resume:

rl.on('resume', function() {

console.log('Readline resumed.');

});

Event: 'close'

function () {}

Emitted when close() is called.

Also emitted when the input stream receives its "end" event. The Interface instance should be considered "finished" once this is emitted. For example, when the input stream receives ^D, respectively known as EOT.

This event is also called if there is no SIGINT event listener present when the input stream receives a ^C, respectively known as SIGINT.

Event: 'SIGINT'

function () {}

Emitted whenever the input stream receives a ^C, respectively known as SIGINT. If there is no SIGINT event listener present when the input stream receives a SIGINT, pause will be triggered.

Example of listening for SIGINT:

rl.on('SIGINT', function() {

rl.question('Are you sure you want to exit?', function(answer) {

if (answer.match(/^y(es)?$/i)) rl.pause();

});

});

Event: 'SIGTSTP'

function () {}

This does not work on Windows.

Emitted whenever the input stream receives a ^Z, respectively known as SIGTSTP. If there is no SIGTSTP event listener present when the input stream receives a SIGTSTP, the program will be sent to the background.

When the program is resumed with fg, the pause and SIGCONT events will be emitted. You can use either to resume the stream.

The pause and SIGCONT events will not be triggered if the stream was paused before the program was sent to the background.

Example of listening for SIGTSTP:

rl.on('SIGTSTP', function() {

// This will override SIGTSTP and prevent the program from going to the

// background.

console.log('Caught SIGTSTP.');

});

Event: 'SIGCONT'

function () {}

This does not work on Windows.

Emitted whenever the input stream is sent to the background with ^Z, respectively known as SIGTSTP, and then continued with fg(1). This event only emits if the stream was not paused before sending the program to the background.

Example of listening for SIGCONT:

rl.on('SIGCONT', function() {

// `prompt` will automatically resume the stream

rl.prompt();

});

Example: Tiny CLI

Here's an example of how to use all these together to craft a tiny command line interface:

var readline = require('readline'),

rl = readline.createInterface(process.stdin, process.stdout);

rl.setPrompt('OHAI> ');

rl.prompt();

rl.on('line', function(line) {

switch(line.trim()) {

case 'hello':

console.log('world!');

break;

default:

console.log('Say what? I might have heard `' + line.trim() + '`');

break;

}

rl.prompt();

}).on('close', function() {

console.log('Have a great day!');

process.exit(0);

});

REPL

A Read-Eval-Print-Loop (REPL) is available both as a standalone program and easily includable in other programs. The REPL provides a way to interactively run JavaScript and see the results. It can be used for debugging, testing, or just trying things out.

By executing node without any arguments from the command-line you will be dropped into the REPL. It has simplistic emacs line-editing.

mjr:~$ node

Type '.help' for options.

> a = [ 1, 2, 3];

[ 1, 2, 3 ]

> a.forEach(function (v) {

... console.log(v);

... });

1

2

3

For advanced line-editors, start node with the environmental variable NODE_NO_READLINE=1. This will start the main and debugger REPL in canonical terminal settings which will allow you to use with rlwrap.

For example, you could add this to your bashrc file:

alias node="env NODE_NO_READLINE=1 rlwrap node"

repl.start(options)

Returns and starts a REPLServer instance. Accepts an "options" Object that takes the following values:

• prompt - the prompt and stream for all I/O. Defaults to > .
• input - the readable stream to listen to. Defaults to process.stdin.
• output - the writable stream to write readline data to. Defaults to process.stdout.
• terminal - pass true if the stream should be treated like a TTY, and have ANSI/VT100 escape codes written to it. Defaults to checking isTTY on the output stream upon instantiation.
• eval - function that will be used to eval each given line. Defaults to an async wrapper for eval(). See below for an example of a custom eval.
• useColors - a boolean which specifies whether or not the writer function should output colors. If a different writer function is set then this does nothing. Defaults to the repl's terminal value.
• useGlobal - if set to true, then the repl will use the global object, instead of running scripts in a separate context. Defaults to false.
• ignoreUndefined - if set to true, then the repl will not output the return value of command if it's undefined. Defaults to false.
• writer - the function to invoke for each command that gets evaluated which returns the formatting (including coloring) to display. Defaults to util.inspect.

You can use your own eval function if it has following signature:

function eval(cmd, context, filename, callback) {

callback(null, result);

}

Multiple REPLs may be started against the same running instance of node. Each will share the same global object but will have unique I/O.

Here is an example that starts a REPL on stdin, a Unix socket, and a TCP socket:

var net = require("net"),

repl = require("repl");

connections = 0;

repl.start({

prompt: "node via stdin> ",

input: process.stdin,

output: process.stdout

});

net.createServer(function (socket) {

connections += 1;

repl.start({

prompt: "node via Unix socket> ",

input: socket,

output: socket

}).on('exit', function() {

socket.end();

})

}).listen("/tmp/node-repl-sock");

net.createServer(function (socket) {

connections += 1;

repl.start({

prompt: "node via TCP socket> ",

input: socket,

output: socket

}).on('exit', function() {

socket.end();

});

}).listen(5001);

Running this program from the command line will start a REPL on stdin. Other REPL clients may connect through the Unix socket or TCP socket. telnet is useful for connecting to TCP sockets, and socat can be used to connect to both Unix and TCP sockets.

By starting a REPL from a Unix socket-based server instead of stdin, you can connect to a long-running node process without restarting it.

For an example of running a "full-featured" (terminal) REPL over a net.Server and net.Socket instance, see: https://gist.github.com/2209310

For an example of running a REPL instance over curl(1), see: https://gist.github.com/2053342

Event: 'exit'

function () {}

Emitted when the user exits the REPL in any of the defined ways. Namely, typing .exit at the repl, pressing Ctrl+C twice to signal SIGINT, or pressing Ctrl+D to signal "end" on the input stream.

Example of listening for exit:

r.on('exit', function () {

console.log('Got "exit" event from repl!');

process.exit();

});

REPL Features

Inside the REPL, Control+D will exit. Multi-line expressions can be input. Tab completion is supported for both global and local variables.

The special variable _ (underscore) contains the result of the last expression.

> [ "a", "b", "c" ]

[ 'a', 'b', 'c' ]

> _.length

3

> _ += 1

4

The REPL provides access to any variables in the global scope. You can expose a variable to the REPL explicitly by assigning it to the context object associated with each REPLServer. For example:

// repl_test.js

var repl = require("repl"),

msg = "message";

repl.start("> ").context.m = msg;

Things in the context object appear as local within the REPL:

mjr:~$ node repl_test.js

> m

'message'

There are a few special REPL commands:

• .break - While inputting a multi-line expression, sometimes you get lost or just don't care about completing it. .break will start over.
• .clear - Resets the context object to an empty object and clears any multi-line expression.
• .exit - Close the I/O stream, which will cause the REPL to exit.
• .help - Show this list of special commands.
• .save - Save the current REPL session to a file
  .save ./file/to/save.js
• .load - Load a file into the current REPL session.
  .load ./file/to/load.js

The following key combinations in the REPL have these special effects:

• <ctrl>C - Similar to the .break keyword. Terminates the current command. Press twice on a blank line to forcibly exit.
• <ctrl>D - Similar to the .exit keyword.

Executing JavaScript

Stability: 2 - Unstable. See Caveats, below.

You can access this module with:

var vm = require('vm');

JavaScript code can be compiled and run immediately or compiled, saved, and run later.

Caveats

The vm module has many known issues and edge cases. If you run into issues or unexpected behavior, please consult the open issues on GitHub. Some of the biggest problems are described below.

Sandboxes

The sandbox argument to vm.runInNewContext and vm.createContext, along with the initSandbox argument to vm.createContext, do not behave as one might normally expect and their behavior varies between different versions of Node.

The key issue to be aware of is that V8 provides no way to directly control the global object used within a context. As a result, while properties of your sandbox object will be available in the context, any properties from the prototypes of the sandbox may not be available. Furthermore, the this expression within the global scope of the context evaluates to the empty object ({}) instead of to your sandbox.

Your sandbox's properties are also not shared directly with the script. Instead, the properties of the sandbox are copied into the context at the beginning of execution, and then after execution, the properties are copied back out in an attempt to propagate any changes.

Globals

Properties of the global object, like Array and String, have different values inside of a context. This means that common expressions like [] instanceof Array or Object.getPrototypeOf([]) === Array.prototype may not produce expected results when used inside of scripts evaluated via the vm module.

Some of these problems have known workarounds listed in the issues for vm on GitHub. for example, Array.isArray works around the example problem with Array.

vm.runInThisContext(code, [filename])

vm.runInThisContext() compiles code, runs it and returns the result. Running code does not have access to local scope. filename is optional, it's used only in stack traces.

Example of using vm.runInThisContext and eval to run the same code:

var localVar = 123,

usingscript, evaled,

vm = require('vm');

usingscript = vm.runInThisContext('localVar = 1;',

'myfile.vm');

console.log('localVar: ' + localVar + ', usingscript: ' +

usingscript);

evaled = eval('localVar = 1;');

console.log('localVar: ' + localVar + ', evaled: ' +

evaled);

// localVar: 123, usingscript: 1

// localVar: 1, evaled: 1

vm.runInThisContext does not have access to the local scope, so localVar is unchanged. eval does have access to the local scope, so localVar is changed.

In case of syntax error in code, vm.runInThisContext emits the syntax error to stderr and throws an exception.

vm.runInNewContext(code, [sandbox], [filename])

vm.runInNewContext compiles code, then runs it in sandbox and returns the result. Running code does not have access to local scope. The object sandbox will be used as the global object for code. sandbox and filename are optional, filename is only used in stack traces.

Example: compile and execute code that increments a global variable and sets a new one. These globals are contained in the sandbox.

var util = require('util'),

vm = require('vm'),

sandbox = {

animal: 'cat',

count: 2

};

vm.runInNewContext('count += 1; name = "kitty"', sandbox, 'myfile.vm');

console.log(util.inspect(sandbox));

// { animal: 'cat', count: 3, name: 'kitty' }

Note that running untrusted code is a tricky business requiring great care. To prevent accidental global variable leakage, vm.runInNewContext is quite useful, but safely running untrusted code requires a separate process.

In case of syntax error in code, vm.runInNewContext emits the syntax error to stderr and throws an exception.

vm.runInContext(code, context, [filename])

vm.runInContext compiles code, then runs it in context and returns the result. A (V8) context comprises a global object, together with a set of built-in objects and functions. Running code does not have access to local scope and the global object held within context will be used as the global object for code. filename is optional, it's used only in stack traces.

Example: compile and execute code in a existing context.

var util = require('util'),

vm = require('vm'),

initSandbox = {

animal: 'cat',

count: 2

},

context = vm.createContext(initSandbox);

vm.runInContext('count += 1; name = "CATT"', context, 'myfile.vm');

console.log(util.inspect(context));

// { animal: 'cat', count: 3, name: 'CATT' }

Note that createContext will perform a shallow clone of the supplied sandbox object in order to initialize the global object of the freshly constructed context.

Note that running untrusted code is a tricky business requiring great care. To prevent accidental global variable leakage, vm.runInContext is quite useful, but safely running untrusted code requires a separate process.

In case of syntax error in code, vm.runInContext emits the syntax error to stderr and throws an exception.

vm.createContext([initSandbox])

vm.createContext creates a new context which is suitable for use as the 2nd argument of a subsequent call to vm.runInContext. A (V8) context comprises a global object together with a set of build-in objects and functions. The optional argument initSandbox will be shallow-copied to seed the initial contents of the global object used by the context.

vm.createScript(code, [filename])

createScript compiles code but does not run it. Instead, it returns a vm.Script object representing this compiled code. This script can be run later many times using methods below. The returned script is not bound to any global object. It is bound before each run, just for that run. filename is optional, it's only used in stack traces.

In case of syntax error in code, createScript prints the syntax error to stderr and throws an exception.

Class: Script

A class for running scripts. Returned by vm.createScript.

script.runInThisContext()

Similar to vm.runInThisContext but a method of a precompiled Script object. script.runInThisContext runs the code of script and returns the result. Running code does not have access to local scope, but does have access to the global object (v8: in actual context).

Example of using script.runInThisContext to compile code once and run it multiple times:

var vm = require('vm');

globalVar = 0;

var script = vm.createScript('globalVar += 1', 'myfile.vm');

for (var i = 0; i < 1000 ; i += 1) {

script.runInThisContext();

}

console.log(globalVar);

// 1000

script.runInNewContext([sandbox])

Similar to vm.runInNewContext a method of a precompiled Script object. script.runInNewContext runs the code of script with sandbox as the global object and returns the result. Running code does not have access to local scope. sandbox is optional.

Example: compile code that increments a global variable and sets one, then execute this code multiple times. These globals are contained in the sandbox.

var util = require('util'),

vm = require('vm'),

sandbox = {

animal: 'cat',

count: 2

};

var script = vm.createScript('count += 1; name = "kitty"', 'myfile.vm');

for (var i = 0; i < 10 ; i += 1) {

script.runInNewContext(sandbox);

}

console.log(util.inspect(sandbox));

// { animal: 'cat', count: 12, name: 'kitty' }

Note that running untrusted code is a tricky business requiring great care. To prevent accidental global variable leakage, script.runInNewContext is quite useful, but safely running untrusted code requires a separate process.

Child Process

Stability: 3 - Stable

Node provides a tri-directional popen(3) facility through the child_process module.

It is possible to stream data through a child's stdin, stdout, and stderr in a fully non-blocking way. (Note that some programs use line-buffered I/O internally. That doesn't affect node.js but it means data you send to the child process is not immediately consumed.)

To create a child process use require('child_process').spawn() or require('child_process').fork(). The semantics of each are slightly different, and explained below.

Class: ChildProcess

ChildProcess is an EventEmitter.

Child processes always have three streams associated with them. child.stdin, child.stdout, and child.stderr. These may be shared with the stdio streams of the parent process, or they may be separate stream objects which can be piped to and from.

The ChildProcess class is not intended to be used directly. Use the spawn() or fork() methods to create a Child Process instance.

Event: 'exit'

• code Number the exit code, if it exited normally.
• signal String the signal passed to kill the child process, if it was killed by the parent.

This event is emitted after the child process ends. If the process terminated normally, code is the final exit code of the process, otherwise null. If the process terminated due to receipt of a signal, signal is the string name of the signal, otherwise null.

Note that the child process stdio streams might still be open.

See waitpid(2).

Event: 'close'

• code Number the exit code, if it exited normally.
• signal String the signal passed to kill the child process, if it was killed by the parent.

This event is emitted when the stdio streams of a child process have all terminated. This is distinct from 'exit', since multiple processes might share the same stdio streams.

Event: 'disconnect'

This event is emitted after using the .disconnect() method in the parent or in the child. After disconnecting it is no longer possible to send messages. An alternative way to check if you can send messages is to see if the child.connected property is true.

Event: 'message'

• message Object a parsed JSON object or primitive value
• sendHandle Handle object a Socket or Server object

Messages send by .send(message, [sendHandle]) are obtained using the message event.

child.stdin

• Stream object

A Writable Stream that represents the child process's stdin. Closing this stream via end() often causes the child process to terminate.

If the child stdio streams are shared with the parent, then this will not be set.

child.stdout

• Stream object

A Readable Stream that represents the child process's stdout.

If the child stdio streams are shared with the parent, then this will not be set.

child.stderr

• Stream object

A Readable Stream that represents the child process's stderr.

If the child stdio streams are shared with the parent, then this will not be set.

child.pid

• Integer

The PID of the child process.

Example:

var spawn = require('child_process').spawn,

grep = spawn('grep', ['ssh']);

console.log('Spawned child pid: ' + grep.pid);

grep.stdin.end();

child.kill([signal])

• signal String

Send a signal to the child process. If no argument is given, the process will be sent 'SIGTERM'. See signal(7) for a list of available signals.

var spawn = require('child_process').spawn,

grep = spawn('grep', ['ssh']);

grep.on('close', function (code, signal) {

console.log('child process terminated due to receipt of signal '+signal);

});

// send SIGHUP to process

grep.kill('SIGHUP');

Note that while the function is called kill, the signal delivered to the child process may not actually kill it. kill really just sends a signal to a process.

See kill(2)

child.send(message, [sendHandle])

• message Object
• sendHandle Handle object

When using child_process.fork() you can write to the child using child.send(message, [sendHandle]) and messages are received by a 'message' event on the child.

For example:

var cp = require('child_process');

var n = cp.fork(__dirname + '/sub.js');

n.on('message', function(m) {

console.log('PARENT got message:', m);

});

n.send({ hello: 'world' });

And then the child script, 'sub.js' might look like this:

process.on('message', function(m) {

console.log('CHILD got message:', m);

});

process.send({ foo: 'bar' });

In the child the process object will have a send() method, and process will emit objects each time it receives a message on its channel.

There is a special case when sending a {cmd: 'NODE_foo'} message. All messages containing a NODE_ prefix in its cmd property will not be emitted in the message event, since they are internal messages used by node core. Messages containing the prefix are emitted in the internalMessage event, you should by all means avoid using this feature, it is subject to change without notice.

The sendHandle option to child.send() is for sending a TCP server or socket object to another process. The child will receive the object as its second argument to the message event.

Example: sending server object

Here is an example of sending a server:

var child = require('child_process').fork('child.js');

// Open up the server object and send the handle.

var server = require('net').createServer();

server.on('connection', function (socket) {

socket.end('handled by parent');

});

server.listen(1337, function() {

child.send('server', server);

});

And the child would the receive the server object as:

process.on('message', function(m, server) {

if (m === 'server') {

server.on('connection', function (socket) {

socket.end('handled by child');

});

}

});

Note that the server is now shared between the parent and child, this means that some connections will be handled by the parent and some by the child.

For dgram servers the workflow is exactly the same. Here you listen on a message event instead of connection and use server.bind instead of server.listen.

Example: sending socket object

Here is an example of sending a socket. It will spawn two children and handle connections with the remote address 74.125.127.100 as VIP by sending the socket to a "special" child process. Other sockets will go to a "normal" process.

var normal = require('child_process').fork('child.js', ['normal']);

var special = require('child_process').fork('child.js', ['special']);

// Open up the server and send sockets to child

var server = require('net').createServer();

server.on('connection', function (socket) {

// if this is a VIP

if (socket.remoteAddress === '74.125.127.100') {

special.send('socket', socket);

return;

}

// just the usual dudes

normal.send('socket', socket);

});

server.listen(1337);

The child.js could look like this:

process.on('message', function(m, socket) {

if (m === 'socket') {

socket.end('You were handled as a ' + process.argv[2] + ' person');

}

});

Note that once a single socket has been sent to a child the parent can no longer keep track of when the socket is destroyed. To indicate this condition the .connections property becomes null. It is also recommended not to use .maxConnections in this condition.

child.disconnect()

To close the IPC connection between parent and child use the child.disconnect() method. This allows the child to exit gracefully since there is no IPC channel keeping it alive. When calling this method the disconnect event will be emitted in both parent and child, and the connected flag will be set to false. Please note that you can also call process.disconnect() in the child process.

child_process.spawn(command, [args], [options])

• command String The command to run
• args Array List of string arguments
• options Object
  • cwd String Current working directory of the child process
  • stdio Array|String Child's stdio configuration. (See below)
  • customFds Array Deprecated File descriptors for the child to use for stdio. (See below)
  • env Object Environment key-value pairs
  • detached Boolean The child will be a process group leader. (See below)
  • uid Number Sets the user identity of the process. (See setuid(2).)
  • gid Number Sets the group identity of the process. (See setgid(2).)
• return: ChildProcess object

Launches a new process with the given command, with command line arguments in args. If omitted, args defaults to an empty Array.

The third argument is used to specify additional options, which defaults to:

{ cwd: undefined,

env: process.env

}

cwd allows you to specify the working directory from which the process is spawned. Use env to specify environment variables that will be visible to the new process.

Example of running ls -lh /usr, capturing stdout, stderr, and the exit code:

var spawn = require('child_process').spawn,

ls = spawn('ls', ['-lh', '/usr']);

ls.stdout.on('data', function (data) {

console.log('stdout: ' + data);

});

ls.stderr.on('data', function (data) {

console.log('stderr: ' + data);

});

ls.on('close', function (code) {

console.log('child process exited with code ' + code);

});

Example: A very elaborate way to run 'ps ax | grep ssh'

var spawn = require('child_process').spawn,

ps = spawn('ps', ['ax']),

grep = spawn('grep', ['ssh']);

ps.stdout.on('data', function (data) {

grep.stdin.write(data);

});

ps.stderr.on('data', function (data) {

console.log('ps stderr: ' + data);

});

ps.on('close', function (code) {

if (code !== 0) {

console.log('ps process exited with code ' + code);

}

grep.stdin.end();

});

grep.stdout.on('data', function (data) {

console.log( + data);

});

grep.stderr.on('data', function (data) {

console.log('grep stderr: ' + data);

});

grep.on('close', function (code) {

if (code !== 0) {

console.log('grep process exited with code ' + code);

}

});

Example of checking for failed exec:

var spawn = require('child_process').spawn,

child = spawn('bad_command');

child.stderr.setEncoding('utf8');

child.stderr.on('data', function (data) {

if (/^execvp\(\)/.test(data)) {

console.log('Failed to start child process.');

}

});

Note that if spawn receives an empty options object, it will result in spawning the process with an empty environment rather than using process.env. This due to backwards compatibility issues with a deprecated API.

The 'stdio' option to child_process.spawn() is an array where each index corresponds to a fd in the child. The value is one of the following:

1. 'pipe' - Create a pipe between the child process and the parent process. The parent end of the pipe is exposed to the parent as a property on the child_process object as ChildProcess.stdio[fd]. Pipes created for fds 0 - 2 are also available as ChildProcess.stdin, ChildProcess.stdout and ChildProcess.stderr, respectively.
2. 'ipc' - Create an IPC channel for passing messages/file descriptors between parent and child. A ChildProcess may have at most one IPC stdio file descriptor. Setting this option enables the ChildProcess.send() method. If the child writes JSON messages to this file descriptor, then this will trigger ChildProcess.on('message'). If the child is a Node.js program, then the presence of an IPC channel will enable process.send() and process.on('message').
3. 'ignore' - Do not set this file descriptor in the child. Note that Node will always open fd 0 - 2 for the processes it spawns. When any of these is ignored node will open /dev/null and attach it to the child's fd.
4. Stream object - Share a readable or writable stream that refers to a tty, file, socket, or a pipe with the child process. The stream's underlying file descriptor is duplicated in the child process to the fd that corresponds to the index in the stdio array.
5. Positive integer - The integer value is interpreted as a file descriptor that is is currently open in the parent process. It is shared with the child process, similar to how Stream objects can be shared.
6. null, undefined - Use default value. For stdio fds 0, 1 and 2 (in other words, stdin, stdout, and stderr) a pipe is created. For fd 3 and up, the default is 'ignore'.

As a shorthand, the stdio argument may also be one of the following strings, rather than an array:

• ignore - ['ignore', 'ignore', 'ignore']
• pipe - ['pipe', 'pipe', 'pipe']
• inherit - [process.stdin, process.stdout, process.stderr] or [0,1,2]

Example:

var spawn = require('child_process').spawn;

// Child will use parent's stdios

spawn('prg', [], { stdio: 'inherit' });

// Spawn child sharing only stderr

spawn('prg', [], { stdio: ['pipe', 'pipe', process.stderr] });

// Open an extra fd=4, to interact with programs present a

// startd-style interface.

spawn('prg', [], { stdio: ['pipe', null, null, null, 'pipe'] });

If the detached option is set, the child process will be made the leader of a new process group. This makes it possible for the child to continue running after the parent exits.

By default, the parent will wait for the detached child to exit. To prevent the parent from waiting for a given child, use the child.unref() method, and the parent's event loop will not include the child in its reference count.

Example of detaching a long-running process and redirecting its output to a file:

var fs = require('fs'),

spawn = require('child_process').spawn,

out = fs.openSync('./out.log', 'a'),

err = fs.openSync('./out.log', 'a');

var child = spawn('prg', [], {

detached: true,

stdio: [ 'ignore', out, err ]

});

child.unref();

When using the detached option to start a long-running process, the process will not stay running in the background unless it is provided with a stdio configuration that is not connected to the parent. If the parent's stdio is inherited, the child will remain attached to the controlling terminal.

There is a deprecated option called customFds which allows one to specify specific file descriptors for the stdio of the child process. This API was not portable to all platforms and therefore removed. With customFds it was possible to hook up the new process' [stdin, stdout, stderr] to existing streams; -1 meant that a new stream should be created. Use at your own risk.

There are several internal options. In particular stdinStream, stdoutStream, stderrStream. They are for INTERNAL USE ONLY. As with all undocumented APIs in Node, they should not be used.

See also: child_process.exec() and child_process.fork()

child_process.exec(command, [options], callback)

• command String The command to run, with space-separated arguments
• options Object
  • cwd String Current working directory of the child process
  • stdio Array|String Child's stdio configuration. (See above) Only stdin is configurable, anything else will lead to unpredictable results.
  • customFds Array Deprecated File descriptors for the child to use for stdio. (See above)
  • env Object Environment key-value pairs
  • encoding String (Default: 'utf8')
  • timeout Number (Default: 0)
  • maxBuffer Number (Default: 200*1024)
  • killSignal String (Default: 'SIGTERM')
• callback Function called with the output when process terminates
  • error Error
  • stdout Buffer
  • stderr Buffer
• Return: ChildProcess object

Runs a command in a shell and buffers the output.

var exec = require('child_process').exec,

child;

child = exec('cat *.js bad_file | wc -l',

function (error, stdout, stderr) {

console.log('stdout: ' + stdout);

console.log('stderr: ' + stderr);

if (error !== null) {

console.log('exec error: ' + error);

}

});

The callback gets the arguments (error, stdout, stderr). On success, error will be null. On error, error will be an instance of Error and err.code will be the exit code of the child process, and err.signal will be set to the signal that terminated the process.

There is a second optional argument to specify several options. The default options are

{ encoding: 'utf8',

timeout: 0,

maxBuffer: 200*1024,

killSignal: 'SIGTERM',

cwd: null,

env: null }

If timeout is greater than 0, then it will kill the child process if it runs longer than timeout milliseconds. The child process is killed with killSignal (default: 'SIGTERM'). maxBuffer specifies the largest amount of data allowed on stdout or stderr - if this value is exceeded then the child process is killed.

child_process.execFile(file, args, options, callback)

• file String The filename of the program to run
• args Array List of string arguments
• options Object
  • cwd String Current working directory of the child process
  • stdio Array|String Child's stdio configuration. (See above)
  • customFds Array Deprecated File descriptors for the child to use for stdio. (See above)
  • env Object Environment key-value pairs
  • encoding String (Default: 'utf8')
  • timeout Number (Default: 0)
  • maxBuffer Number (Default: 200*1024)
  • killSignal String (Default: 'SIGTERM')
• callback Function called with the output when process terminates
  • error Error
  • stdout Buffer
  • stderr Buffer
• Return: ChildProcess object

This is similar to child_process.exec() except it does not execute a subshell but rather the specified file directly. This makes it slightly leaner than child_process.exec. It has the same options.

child_process.fork(modulePath, [args], [options])

• modulePath String The module to run in the child
• args Array List of string arguments
• options Object
  • cwd String Current working directory of the child process
  • env Object Environment key-value pairs
  • encoding String (Default: 'utf8')
  • execPath String Executable used to create the child process
• Return: ChildProcess object

This is a special case of the spawn() functionality for spawning Node processes. In addition to having all the methods in a normal ChildProcess instance, the returned object has a communication channel built-in. See child.send(message, [sendHandle]) for details.

By default the spawned Node process will have the stdout, stderr associated with the parent's. To change this behavior set the silent property in the options object to true.

The child process does not automatically exit once it's done, you need to call process.exit() explicitly. This limitation may be lifted in the future.

These child Nodes are still whole new instances of V8. Assume at least 30ms startup and 10mb memory for each new Node. That is, you cannot create many thousands of them.

The execPath property in the options object allows for a process to be created for the child rather than the current node executable. This should be done with care and by default will talk over the fd represented an environmental variable NODE_CHANNEL_FD on the child process. The input and output on this fd is expected to be line delimited JSON objects.

Assert

Stability: 5 - Locked

This module is used for writing unit tests for your applications, you can access it with require('assert').

assert.fail(actual, expected, message, operator)

Throws an exception that displays the values for actual and expected separated by the provided operator.

assert(value, message), assert.ok(value, [message])

Tests if value is truthy, it is equivalent to assert.equal(true, !!value, message);

assert.equal(actual, expected, [message])

Tests shallow, coercive equality with the equal comparison operator ( == ).

assert.notEqual(actual, expected, [message])

Tests shallow, coercive non-equality with the not equal comparison operator ( != ).

assert.deepEqual(actual, expected, [message])

Tests for deep equality.

assert.notDeepEqual(actual, expected, [message])

Tests for any deep inequality.

assert.strictEqual(actual, expected, [message])

Tests strict equality, as determined by the strict equality operator ( === )

assert.notStrictEqual(actual, expected, [message])

Tests strict non-equality, as determined by the strict not equal operator ( !== )

assert.throws(block, [error], [message])

Expects block to throw an error. error can be constructor, regexp or validation function.

Validate instanceof using constructor:

assert.throws(

function() {

throw new Error("Wrong value");

},

Error

);

Validate error message using RegExp:

assert.throws(

function() {

throw new Error("Wrong value");

},

/value/

);

Custom error validation:

assert.throws(

function() {

throw new Error("Wrong value");

},

function(err) {

if ( (err instanceof Error) && /value/.test(err) ) {

return true;

}

},

"unexpected error"

);

assert.doesNotThrow(block, [message])

Expects block not to throw an error, see assert.throws for details.

assert.ifError(value)

Tests if value is not a false value, throws if it is a true value. Useful when testing the first argument, error in callbacks.

TTY

Stability: 2 - Unstable

The tty module houses the tty.ReadStream and tty.WriteStream classes. In most cases, you will not need to use this module directly.

When node detects that it is being run inside a TTY context, then process.stdin will be a tty.ReadStream instance and process.stdout will be a tty.WriteStream instance. The preferred way to check if node is being run in a TTY context is to check process.stdout.isTTY:

$ node -p -e "Boolean(process.stdout.isTTY)"

true

$ node -p -e "Boolean(process.stdout.isTTY)" | cat

false

tty.isatty(fd)

Returns true or false depending on if the fd is associated with a terminal.

tty.setRawMode(mode)

Deprecated. Use tty.ReadStream#setRawMode() (i.e. process.stdin.setRawMode()) instead.

Class: ReadStream

A net.Socket subclass that represents the readable portion of a tty. In normal circumstances, process.stdin will be the only tty.ReadStream instance in any node program (only when isatty(0) is true).

rs.isRaw

A Boolean that is initialized to false. It represents the current "raw" state of the tty.ReadStream instance.

rs.setRawMode(mode)

mode should be true or false. This sets the properties of the tty.ReadStream to act either as a raw device or default. isRaw will be set to the resulting mode.

Class WriteStream

A net.Socket subclass that represents the writable portion of a tty. In normal circumstances, process.stdout will be the only tty.WriteStream instance ever created (and only when isatty(1) is true).

ws.columns

A Number that gives the number of columns the TTY currently has. This property gets updated on "resize" events.

ws.rows

A Number that gives the number of rows the TTY currently has. This property gets updated on "resize" events.

Event: 'resize'

function () {}

Emitted by refreshSize() when either of the columns or rows properties has changed.

process.stdout.on('resize', function() {

console.log('screen size has changed!');

console.log(process.stdout.columns + 'x' + process.stdout.rows);

});

Zlib

Stability: 3 - Stable

You can access this module with:

var zlib = require('zlib');

This provides bindings to Gzip/Gunzip, Deflate/Inflate, and DeflateRaw/InflateRaw classes. Each class takes the same options, and is a readable/writable Stream.

Examples

Compressing or decompressing a file can be done by piping an fs.ReadStream into a zlib stream, then into an fs.WriteStream.

var gzip = zlib.createGzip();

var fs = require('fs');

var inp = fs.createReadStream('input.txt');

var out = fs.createWriteStream('input.txt.gz');

inp.pipe(gzip).pipe(out);

Compressing or decompressing data in one step can be done by using the convenience methods.

var input = '.................................';

zlib.deflate(input, function(err, buffer) {

if (!err) {

console.log(buffer.toString('base64'));

}

});

var buffer = new Buffer('eJzT0yMAAGTvBe8=', 'base64');

zlib.unzip(buffer, function(err, buffer) {

if (!err) {

console.log(buffer.toString());

}

});

To use this module in an HTTP client or server, use the accept-encoding on requests, and the content-encoding header on responses.

Note: these examples are drastically simplified to show the basic concept. Zlib encoding can be expensive, and the results ought to be cached. See Memory Usage Tuning below for more information on the speed/memory/compression tradeoffs involved in zlib usage.

// client request example

var zlib = require('zlib');

var http = require('http');

var fs = require('fs');

var request = http.get({ host: 'izs.me',

path: '/',

port: 80,

headers: { 'accept-encoding': 'gzip,deflate' } });

request.on('response', function(response) {

var output = fs.createWriteStream('izs.me_index.html');

switch (response.headers['content-encoding']) {

// or, just use zlib.createUnzip() to handle both cases

case 'gzip':

response.pipe(zlib.createGunzip()).pipe(output);

break;

case 'deflate':

response.pipe(zlib.createInflate()).pipe(output);

break;

default:

response.pipe(output);

break;

}

});

// server example

// Running a gzip operation on every request is quite expensive.

// It would be much more efficient to cache the compressed buffer.

var zlib = require('zlib');

var http = require('http');

var fs = require('fs');

http.createServer(function(request, response) {

var raw = fs.createReadStream('index.html');

var acceptEncoding = request.headers['accept-encoding'];

if (!acceptEncoding) {

acceptEncoding = ;

}

// Note: this is not a conformant accept-encoding parser.

// See http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.3

if (acceptEncoding.match(/\bdeflate\b/)) {

response.writeHead(200, { 'content-encoding': 'deflate' });

raw.pipe(zlib.createDeflate()).pipe(response);

} else if (acceptEncoding.match(/\bgzip\b/)) {

response.writeHead(200, { 'content-encoding': 'gzip' });

raw.pipe(zlib.createGzip()).pipe(response);

} else {

response.writeHead(200, {});

raw.pipe(response);

}

}).listen(1337);

zlib.createGzip([options])

Returns a new Gzip object with an options.

zlib.createGunzip([options])

Returns a new Gunzip object with an options.

zlib.createDeflate([options])

Returns a new Deflate object with an options.

zlib.createInflate([options])

Returns a new Inflate object with an options.

zlib.createDeflateRaw([options])

Returns a new DeflateRaw object with an options.

zlib.createInflateRaw([options])

Returns a new InflateRaw object with an options.

zlib.createUnzip([options])

Returns a new Unzip object with an options.

Class: zlib.Zlib

Not exported by the zlib module. It is documented here because it is the base class of the compressor/decompressor classes.

zlib.flush(callback)

Flush pending data. Don't call this frivolously, premature flushes negatively impact the effectiveness of the compression algorithm.

zlib.reset()

Reset the compressor/decompressor to factory defaults. Only applicable to the inflate and deflate algorithms.

Class: zlib.Gzip

Compress data using gzip.

Class: zlib.Gunzip

Decompress a gzip stream.

Class: zlib.Deflate

Compress data using deflate.

Class: zlib.Inflate

Decompress a deflate stream.

Class: zlib.DeflateRaw

Compress data using deflate, and do not append a zlib header.

Class: zlib.InflateRaw

Decompress a raw deflate stream.

Class: zlib.Unzip

Decompress either a Gzip- or Deflate-compressed stream by auto-detecting the header.

Convenience Methods

All of these take a string or buffer as the first argument, and call the supplied callback with callback(error, result). The compression/decompression engine is created using the default settings in all convenience methods. To supply different options, use the zlib classes directly.

zlib.deflate(buf, callback)

Compress a string with Deflate.

zlib.deflateRaw(buf, callback)

Compress a string with DeflateRaw.

zlib.gzip(buf, callback)

Compress a string with Gzip.

zlib.gunzip(buf, callback)

Decompress a raw Buffer with Gunzip.

zlib.inflate(buf, callback)

Decompress a raw Buffer with Inflate.

zlib.inflateRaw(buf, callback)

Decompress a raw Buffer with InflateRaw.

zlib.unzip(buf, callback)

Decompress a raw Buffer with Unzip.

Options

Each class takes an options object. All options are optional. (The convenience methods use the default settings for all options.)

Note that some options are only relevant when compressing, and are ignored by the decompression classes.

• flush (default: zlib.Z_NO_FLUSH)
• chunkSize (default: 16*1024)
• windowBits
• level (compression only)
• memLevel (compression only)
• strategy (compression only)
• dictionary (deflate/inflate only, empty dictionary by default)

See the description of deflateInit2 and inflateInit2 at

http://zlib.net/manual.html#Advanced for more information on these.

Memory Usage Tuning

From zlib/zconf.h, modified to node's usage:

The memory requirements for deflate are (in bytes):

(1 << (windowBits+2)) + (1 << (memLevel+9))

that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) plus a few kilobytes for small objects.

For example, if you want to reduce the default memory requirements from 256K to 128K, set the options to:

{ windowBits: 14, memLevel: 7 }

Of course this will generally degrade compression (there's no free lunch).

The memory requirements for inflate are (in bytes)

1 << windowBits

that is, 32K for windowBits=15 (default value) plus a few kilobytes for small objects.

This is in addition to a single internal output slab buffer of size chunkSize, which defaults to 16K.

The speed of zlib compression is affected most dramatically by the level setting. A higher level will result in better compression, but will take longer to complete. A lower level will result in less compression, but will be much faster.

In general, greater memory usage options will mean that node has to make fewer calls to zlib, since it'll be able to process more data in a single write operation. So, this is another factor that affects the speed, at the cost of memory usage.

Constants

All of the constants defined in zlib.h are also defined on require('zlib'). In the normal course of operations, you will not need to ever set any of these. They are documented here so that their presence is not surprising. This section is taken almost directly from the zlib documentation. See

http://zlib.net/manual.html#Constants for more details.

Allowed flush values.

• zlib.Z_NO_FLUSH
• zlib.Z_PARTIAL_FLUSH
• zlib.Z_SYNC_FLUSH
• zlib.Z_FULL_FLUSH
• zlib.Z_FINISH
• zlib.Z_BLOCK
• zlib.Z_TREES

Return codes for the compression/decompression functions. Negative values are errors, positive values are used for special but normal events.

• zlib.Z_OK
• zlib.Z_STREAM_END
• zlib.Z_NEED_DICT
• zlib.Z_ERRNO
• zlib.Z_STREAM_ERROR
• zlib.Z_DATA_ERROR
• zlib.Z_MEM_ERROR
• zlib.Z_BUF_ERROR
• zlib.Z_VERSION_ERROR

Compression levels.

• zlib.Z_NO_COMPRESSION
• zlib.Z_BEST_SPEED
• zlib.Z_BEST_COMPRESSION
• zlib.Z_DEFAULT_COMPRESSION

Compression strategy.

• zlib.Z_FILTERED
• zlib.Z_HUFFMAN_ONLY
• zlib.Z_RLE
• zlib.Z_FIXED
• zlib.Z_DEFAULT_STRATEGY

Possible values of the data_type field.

• zlib.Z_BINARY
• zlib.Z_TEXT
• zlib.Z_ASCII
• zlib.Z_UNKNOWN

The deflate compression method (the only one supported in this version).

• zlib.Z_DEFLATED

For initializing zalloc, zfree, opaque.

• zlib.Z_NULL

os

Stability: 4 - API Frozen

Provides a few basic operating-system related utility functions.

Use require('os') to access this module.

os.tmpdir()

Returns the operating system's default directory for temp files.

os.endianness()

Returns the endianness of the CPU. Possible values are "BE" or "LE".

os.hostname()

Returns the hostname of the operating system.

os.type()

Returns the operating system name.

os.platform()

Returns the operating system platform.

os.arch()

Returns the operating system CPU architecture.

os.release()

Returns the operating system release.

os.uptime()

Returns the system uptime in seconds.

os.loadavg()

Returns an array containing the 1, 5, and 15 minute load averages.

os.totalmem()

Returns the total amount of system memory in bytes.

os.freemem()

Returns the amount of free system memory in bytes.

os.cpus()

Returns an array of objects containing information about each CPU/core installed: model, speed (in MHz), and times (an object containing the number of milliseconds the CPU/core spent in: user, nice, sys, idle, and irq).

Example inspection of os.cpus:

[ { model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 252020,

nice: 0,

sys: 30340,

idle: 1070356870,

irq: 0 } },

{ model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 306960,

nice: 0,

sys: 26980,

idle: 1071569080,

irq: 0 } },

{ model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 248450,

nice: 0,

sys: 21750,

idle: 1070919370,

irq: 0 } },

{ model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 256880,

nice: 0,

sys: 19430,

idle: 1070905480,

irq: 20 } },

{ model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 511580,

nice: 20,

sys: 40900,

idle: 1070842510,

irq: 0 } },

{ model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 291660,

nice: 0,

sys: 34360,

idle: 1070888000,

irq: 10 } },

{ model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 308260,

nice: 0,

sys: 55410,

idle: 1071129970,

irq: 880 } },

{ model: 'Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz',

speed: 2926,

times:

{ user: 266450,

nice: 1480,

sys: 34920,

idle: 1072572010,

irq: 30 } } ]

os.networkInterfaces()

Get a list of network interfaces:

{ lo0:

[ { address: '::1', family: 'IPv6', internal: true },

{ address: 'fe80::1', family: 'IPv6', internal: true },

{ address: '127.0.0.1', family: 'IPv4', internal: true } ],

en1:

[ { address: 'fe80::cabc:c8ff:feef:f996', family: 'IPv6',

internal: false },

{ address: '10.0.1.123', family: 'IPv4', internal: false } ],

vmnet1: [ { address: '10.99.99.254', family: 'IPv4', internal: false } ],

vmnet8: [ { address: '10.88.88.1', family: 'IPv4', internal: false } ],

ppp0: [ { address: '10.2.0.231', family: 'IPv4', internal: false } ] }

os.EOL

A constant defining the appropriate End-of-line marker for the operating system.

Debugger

Stability: 3 - Stable

V8 comes with an extensive debugger which is accessible out-of-process via a simple TCP protocol. Node has a built-in client for this debugger. To use this, start Node with the debug argument; a prompt will appear:

% node debug myscript.js

< debugger listening on port 5858

connecting... ok

break in /home/indutny/Code/git/indutny/myscript.js:1

1 x = 5;

2 setTimeout(function () {

3 debugger;

debug>

Node's debugger client doesn't support the full range of commands, but simple step and inspection is possible. By putting the statement debugger; into the source code of your script, you will enable a breakpoint.

For example, suppose myscript.js looked like this:

// myscript.js

x = 5;

setTimeout(function () {

debugger;

console.log("world");

}, 1000);

console.log("hello");

Then once the debugger is run, it will break on line 4.

% node debug myscript.js

< debugger listening on port 5858

connecting... ok

break in /home/indutny/Code/git/indutny/myscript.js:1

1 x = 5;

2 setTimeout(function () {

3 debugger;

debug> cont

< hello

break in /home/indutny/Code/git/indutny/myscript.js:3

1 x = 5;

2 setTimeout(function () {

3 debugger;

4 console.log("world");

5 }, 1000);

debug> next

break in /home/indutny/Code/git/indutny/myscript.js:4

2 setTimeout(function () {

3 debugger;

4 console.log("world");

5 }, 1000);

6 console.log("hello");

debug> repl

Press Ctrl + C to leave debug repl

> x

5

> 2+2

4

debug> next

< world

break in /home/indutny/Code/git/indutny/myscript.js:5

3 debugger;

4 console.log("world");

5 }, 1000);

6 console.log("hello");

7

debug> quit

%

The repl command allows you to evaluate code remotely. The next command steps over to the next line. There are a few other commands available and more to come. Type help to see others.

Watchers

You can watch expression and variable values while debugging your code. On every breakpoint each expression from the watchers list will be evaluated in the current context and displayed just before the breakpoint's source code listing.

To start watching an expression, type watch("my_expression"). watchers prints the active watchers. To remove a watcher, type unwatch("my_expression").

Commands reference

Stepping

• cont, c - Continue execution
• next, n - Step next
• step, s - Step in
• out, o - Step out
• pause - Pause running code (like pause button in Developer TOols)

Breakpoints

• setBreakpoint(), sb() - Set breakpoint on current line
• setBreakpoint(line), sb(line) - Set breakpoint on specific line
• setBreakpoint('fn()'), sb(...) - Set breakpoint on a first statement in functions body
• setBreakpoint('script.js', 1), sb(...) - Set breakpoint on first line of script.js
• clearBreakpoint, cb(...) - Clear breakpoint

Info

• backtrace, bt - Print backtrace of current execution frame
• list(5) - List scripts source code with 5 line context (5 lines before and after)
• watch(expr) - Add expression to watch list
• unwatch(expr) - Remove expression from watch list
• watchers - List all watchers and their values (automatically listed on each breakpoint)
• repl - Open debugger's repl for evaluation in debugging script's context

Execution control

• run - Run script (automatically runs on debugger's start)
• restart - Restart script
• kill - Kill script

Various

• scripts - List all loaded scripts
• version - Display v8's version

Advanced Usage

The V8 debugger can be enabled and accessed either by starting Node with the --debug command-line flag or by signaling an existing Node process with SIGUSR1.

Once a process has been set in debug mode with this it can be connected to with the node debugger. Either connect to the pid or the URI to the debugger. The syntax is:

• node debug -p <pid> - Connects to the process via the pid
• `node debug - Connects to the process via the URI such as localhost:5858

Cluster

Stability: 1 - Experimental

A single instance of Node runs in a single thread. To take advantage of multi-core systems the user will sometimes want to launch a cluster of Node processes to handle the load.

The cluster module allows you to easily create a network of processes that all share server ports.

var cluster = require('cluster');

var http = require('http');

var numCPUs = require('os').cpus().length;

if (cluster.isMaster) {

// Fork workers.

for (var i = 0; i < numCPUs; i++) {

cluster.fork();

}

cluster.on('exit', function(worker, code, signal) {

console.log('worker ' + worker.process.pid + ' died');

});

} else {

// Workers can share any TCP connection

// In this case its a HTTP server

http.createServer(function(req, res) {

res.writeHead(200);

res.end("hello world\n");

}).listen(8000);

}

Running node will now share port 8000 between the workers:

% NODE_DEBUG=cluster node server.js

23521,Master Worker 23524 online

23521,Master Worker 23526 online

23521,Master Worker 23523 online

23521,Master Worker 23528 online

This feature was introduced recently, and may change in future versions. Please try it out and provide feedback.

Also note that, on Windows, it is not yet possible to set up a named pipe server in a worker.

How It Works

The worker processes are spawned using the child_process.fork method, so that they can communicate with the parent via IPC and pass server handles back and forth.

When you call server.listen(...) in a worker, it serializes the arguments and passes the request to the master process. If the master process already has a listening server matching the worker's requirements, then it passes the handle to the worker. If it does not already have a listening server matching that requirement, then it will create one, and pass the handle to the child.

This causes potentially surprising behavior in three edge cases:

1. server.listen({fd: 7}) Because the message is passed to the master, file descriptor 7 in the parent will be listened on, and the handle passed to the worker, rather than listening to the worker's idea of what the number 7 file descriptor references.
2. server.listen(handle) Listening on handles explicitly will cause the worker to use the supplied handle, rather than talk to the master process. If the worker already has the handle, then it's presumed that you know what you are doing.
3. server.listen(0) Normally, this will cause servers to listen on a random port. However, in a cluster, each worker will receive the same "random" port each time they do listen(0). In essence, the port is random the first time, but predictable thereafter. If you want to listen on a unique port, generate a port number based on the cluster worker ID.

When multiple processes are all accept()ing on the same underlying resource, the operating system load-balances across them very efficiently. There is no routing logic in Node.js, or in your program, and no shared state between the workers. Therefore, it is important to design your program such that it does not rely too heavily on in-memory data objects for things like sessions and login.

Because workers are all separate processes, they can be killed or re-spawned depending on your program's needs, without affecting other workers. As long as there are some workers still alive, the server will continue to accept connections. Node does not automatically manage the number of workers for you, however. It is your responsibility to manage the worker pool for your application's needs.

cluster.settings

• Object
  • exec String file path to worker file. (Default=__filename)
  • args Array string arguments passed to worker. (Default=process.argv.slice(2))
  • silent Boolean whether or not to send output to parent's stdio. (Default=false)

All settings set by the .setupMaster is stored in this settings object. This object is not supposed to be changed or set manually, by you.

cluster.isMaster

• Boolean

True if the process is a master. This is determined by the process.env.NODE_UNIQUE_ID. If process.env.NODE_UNIQUE_ID is undefined, then isMaster is true.

cluster.isWorker

• Boolean

This boolean flag is true if the process is a worker forked from a master. If the process.env.NODE_UNIQUE_ID is set to a value, then isWorker is true.

Event: 'fork'

• worker Worker object

When a new worker is forked the cluster module will emit a 'fork' event. This can be used to log worker activity, and create you own timeout.

var timeouts = [];

function errorMsg() {

console.error("Something must be wrong with the connection ...");

}

cluster.on('fork', function(worker) {

timeouts[worker.id] = setTimeout(errorMsg, 2000);

});

cluster.on('listening', function(worker, address) {

clearTimeout(timeouts[worker.id]);

});

cluster.on('exit', function(worker, code, signal) {

clearTimeout(timeouts[worker.id]);

errorMsg();

});

Event: 'online'

• worker Worker object

After forking a new worker, the worker should respond with a online message. When the master receives a online message it will emit such event. The difference between 'fork' and 'online' is that fork is emitted when the master tries to fork a worker, and 'online' is emitted when the worker is being executed.

cluster.on('online', function(worker) {

console.log("Yay, the worker responded after it was forked");

});

Event: 'listening'

• worker Worker object
• address Object

When calling listen() from a worker, a 'listening' event is automatically assigned to the server instance. When the server is listening a message is send to the master where the 'listening' event is emitted.

The event handler is executed with two arguments, the worker contains the worker object and the address object contains the following connection properties: address, port and addressType. This is very useful if the worker is listening on more than one address.

cluster.on('listening', function(worker, address) {

console.log("A worker is now connected to " + address.address + ":" + address.port);

});

Event: 'disconnect'

• worker Worker object

When a workers IPC channel has disconnected this event is emitted. This will happen when the worker dies, usually after calling .kill().

When calling .disconnect(), there may be a delay between the disconnect and exit events. This event can be used to detect if the process is stuck in a cleanup or if there are long-living connections.

cluster.on('disconnect', function(worker) {

console.log('The worker #' + worker.id + ' has disconnected');

});

Event: 'exit'

• worker Worker object
• code Number the exit code, if it exited normally.
• signal String the name of the signal (eg. 'SIGHUP') that caused the process to be killed.

When any of the workers die the cluster module will emit the 'exit' event. This can be used to restart the worker by calling fork() again.

cluster.on('exit', function(worker, code, signal) {

var exitCode = worker.process.exitCode;

console.log('worker ' + worker.process.pid + ' died ('+exitCode+'). restarting...');

cluster.fork();

});

Event: 'setup'

• worker Worker object

When the .setupMaster() function has been executed this event emits. If .setupMaster() was not executed before fork() this function will call .setupMaster() with no arguments.

cluster.setupMaster([settings])

• settings Object
  • exec String file path to worker file. (Default=__filename)
  • args Array string arguments passed to worker. (Default=process.argv.slice(2))
  • silent Boolean whether or not to send output to parent's stdio. (Default=false)

setupMaster is used to change the default 'fork' behavior. The new settings are effective immediately and permanently, they cannot be changed later on.

Example:

var cluster = require("cluster");

cluster.setupMaster({

exec : "worker.js",

args : ["--use", "https"],

silent : true

});

cluster.fork();

cluster.fork([env])

• env Object Key/value pairs to add to child process environment.
• return Worker object

Spawn a new worker process. This can only be called from the master process.

cluster.disconnect([callback])

• callback Function called when all workers are disconnected and handlers are closed

When calling this method, all workers will commit a graceful suicide. When they are disconnected all internal handlers will be closed, allowing the master process to die graceful if no other event is waiting.

The method takes an optional callback argument which will be called when finished.

cluster.worker

• Object

A reference to the current worker object. Not available in the master process.

var cluster = require('cluster');

if (cluster.isMaster) {

console.log('I am master');

cluster.fork();

cluster.fork();

} else if (cluster.isWorker) {

console.log('I am worker #' + cluster.worker.id);

}

cluster.workers

• Object

A hash that stores the active worker objects, keyed by id field. Makes it easy to loop through all the workers. It is only available in the master process.

// Go through all workers

function eachWorker(callback) {

for (var id in cluster.workers) {

callback(cluster.workers[id]);

}

}

eachWorker(function(worker) {

worker.send('big announcement to all workers');

});

Should you wish to reference a worker over a communication channel, using the worker's unique id is the easiest way to find the worker.

socket.on('data', function(id) {

var worker = cluster.workers[id];

});

Class: Worker

A Worker object contains all public information and method about a worker. In the master it can be obtained using cluster.workers. In a worker it can be obtained using cluster.worker.

worker.id

• String

Each new worker is given its own unique id, this id is stored in the id.

While a worker is alive, this is the key that indexes it in cluster.workers

worker.process

• ChildProcess object

All workers are created using child_process.fork(), the returned object from this function is stored in process.

See: Child Process module

worker.suicide

• Boolean

This property is a boolean. It is set when a worker dies after calling .kill() or immediately after calling the .disconnect() method. Until then it is undefined.

worker.send(message, [sendHandle])

• message Object
• sendHandle Handle object

This function is equal to the send methods provided by child_process.fork(). In the master you should use this function to send a message to a specific worker. However in a worker you can also use process.send(message), since this is the same function.

This example will echo back all messages from the master:

if (cluster.isMaster) {

var worker = cluster.fork();

worker.send('hi there');

} else if (cluster.isWorker) {

process.on('message', function(msg) {

process.send(msg);

});

}

worker.kill([signal='SIGTERM'])

• signal String Name of the kill signal to send to the worker process.

This function will kill the worker, and inform the master to not spawn a new worker. The boolean suicide lets you distinguish between voluntary and accidental exit.

cluster.on('exit', function(worker, code, signal) {

if (worker.suicide === true) {

console.log('Oh, it was just suicide\' – no need to worry').

}

});

// kill worker

worker.kill();

This method is aliased as worker.destroy() for backwards compatibility.

worker.disconnect()

When calling this function the worker will no longer accept new connections, but they will be handled by any other listening worker. Existing connection will be allowed to exit as usual. When no more connections exist, the IPC channel to the worker will close allowing it to die graceful. When the IPC channel is closed the disconnect event will emit, this is then followed by the exit event, there is emitted when the worker finally die.

Because there might be long living connections, it is useful to implement a timeout. This example ask the worker to disconnect and after 2 seconds it will destroy the server. An alternative would be to execute worker.kill() after 2 seconds, but that would normally not allow the worker to do any cleanup if needed.

if (cluster.isMaster) {

var worker = cluster.fork();

var timeout;

worker.on('listening', function(address) {

worker.disconnect();

timeout = setTimeout(function() {

worker.send('force kill');

}, 2000);

});

worker.on('disconnect', function() {

clearTimeout(timeout);

});

} else if (cluster.isWorker) {

var net = require('net');

var server = net.createServer(function(socket) {

// connection never end

});

server.listen(8000);

server.on('close', function() {

// cleanup

});

process.on('message', function(msg) {

if (msg === 'force kill') {

server.destroy();

}

});

}

Event: 'message'

• message Object

This event is the same as the one provided by child_process.fork(). In the master you should use this event, however in a worker you can also use process.on('message')

As an example, here is a cluster that keeps count of the number of requests in the master process using the message system:

var cluster = require('cluster');

var http = require('http');

if (cluster.isMaster) {

// Keep track of http requests

var numReqs = 0;

setInterval(function() {

console.log("numReqs =", numReqs);

}, 1000);

// Count requestes

function messageHandler(msg) {

if (msg.cmd && msg.cmd == 'notifyRequest') {

numReqs += 1;

}

}

// Start workers and listen for messages containing notifyRequest

var numCPUs = require('os').cpus().length;

for (var i = 0; i < numCPUs; i++) {

cluster.fork();

}

Object.keys(cluster.workers).forEach(function(id) {

cluster.workers[id].on('message', messageHandler);

});

} else {

// Worker processes have a http server.

http.Server(function(req, res) {

res.writeHead(200);

res.end("hello world\n");

// notify master about the request

process.send({ cmd: 'notifyRequest' });

}).listen(8000);

}

Event: 'online'

Same as the cluster.on('online') event, but emits only when the state change on the specified worker.

cluster.fork().on('online', function() {

// Worker is online

});

Event: 'listening'

• address Object

Same as the cluster.on('listening') event, but emits only when the state change on the specified worker.

cluster.fork().on('listening', function(address) {

// Worker is listening

});

Event: 'disconnect'

Same as the cluster.on('disconnect') event, but emits only when the state change on the specified worker.

cluster.fork().on('disconnect', function() {

// Worker has disconnected

});

Event: 'exit'

• code Number the exit code, if it exited normally.
• signal String the name of the signal (eg. 'SIGHUP') that caused the process to be killed.

Emitted by the individual worker instance, when the underlying child process is terminated. See child_process event: 'exit'.

var worker = cluster.fork();

worker.on('exit', function(code, signal) {

if( signal ) {

console.log("worker was killed by signal: "+signal);

} else if( code !== 0 ) {

console.log("worker exited with error code: "+code);

} else {

console.log("worker success!");

}

});* Node.js

• Download
• About
• npm Registry
• Docs
• Blog
• Community
• Logos
• Jobs
• @nodejs

Copyright Joyent, Inc, Node.js is a trademark of Joyent, Inc. View license.